WARRANTY
Vipp oers warranty on products according to national laws and regulations. The warranty does not cover defects or damage
caused directly or indirectly by misuse or poor maintenance, violence or manipulation. The warranty presupposes rightful use as
described in Vipp’s care instructions, which can be found in this folder or under the specifications of each product at vipp.com.
In case of a defective product, please contact your place of purchase.
ASSEMBLY GUIDE MAINTENANCE GUIDEPRODUCT DESCRIPTION CARE INSTRUCTIONS
Nestled in the industrial design tradition, the Vipp table is designed to withstand the test of
time in both function and aesthetics. The Vipp719 Open-Air table is 2.5 meters long and consists
of an aluminum frame with a 12 mm ceramic tabletop. The legs are conical and made of teak
wood. Small adjustable feet are to be found underneath each leg, allowing to adjust the height
of the table depending on the surface.
Materials
Tabletop of ceramic. Outdoor coating. Frame with aluminum and teak conical table legs
fitted with screws in stainless steel.
Weight
92 kg / 202.8 lbs
We recommend caring for the tabletop to ensure its long-lasting appeal and appearance.
Ceramic tabletop
General care: Use a cloth, warm water, and a mild detergent. Use a slightly rougher sponge
for solid stains.
Lime stains: Use a lint-free cloth and a mild detergent suitable for painted surfaces. Rinse
with water and wipe down the frame with a dry cloth.
Grease stains: Use alcohol or glass cleaner to remove grease stains.
NOTE
Due to the hardness of the ceramic surface, please use caution when placing delicate items
directly on the tabletop.
Teak wood
Teak will over time patina as it weathers.
Use a brush to remove any built-up dirt from the surfaces. Make sure to follow the natural
grain direction to avoid scratches. Carefully dampen the teak surfaces with clean water
and a lint-free cleaning cloth. Use a teak cleaner and evenly wash all surfaces with a soft
cloth. Follow the instructions of the teak cleaner before cleaning it; use a sponge in the grain
direction to avoid scratches. Lightly rinse surfaces with clean water and allow it to dry.
Powder-coated surfaces
Keep powder-coated surfaces clean and dry. Use a lint-free cleaning cloth or a so
brush with warm water and a mild detergent. Finish by wiping down the surface with
a dry cloth.
Read more about care instructions on vipp.com.
Please follow the installation guide to ensure correct installation.
1. When assembling your table, place it upside down on the cardboard or another so underlay
to prevent scratches or marks and to protect the floor. Do not place the table on its sides.
2. Mount all legs (a), and tighten the top screw on each leg (b).
3. Flip the table carefully, placing it on its feet. Adjust the height of the table using the
adjustment screws.
4. Place tabletop carefully on the frame so it is aligned correctly on all four corners.
If you experience problems, please do not hesitate to contact our Customer Service at info@vipp.com.
PRODUCT DIMENSIONS
W. 100 cm / 39.4 in, L. 250 cm / 98.4 in, H. 74 cm / 29.1 in.
250 cm / 98.4 in
74 cm
29.1 in
(a)
(b)
Daily use
We recommend caring for the table to ensure its long-lasting appeal and appearance.
Use a cloth, warm water, and a mild detergent. Use a slightly rougher sponge for solid stains
on the tabletop and use a teak cleaner on the teak legs.
Protective cover
The protective cover is treated to resist water, oil, and dirt, functioning to protect the furniture.
The cover is not recommended as a permanent cover for the table and chairs, as moisture may
collect and lead to the formation of mold stains.
Table and cushions should be thoroughly dry before being covered for an extended period.
Please note that the cover is specially made for the table and chairs and therefore correct place-
ment is needed. To increase the circulation of air and avoid the formation of condensation, the
cover is not made to floor length.
Never pack or fold covers that have become wet; instead, let them dry in a well-ventilated place.
Use a so cloth and warm water to clean the covers, using a gentle upholstery cleaner if nec-
essary. Rinse with clean water. Solvents are not suitable for cleaning the covers as these are
aggressive to the surface and may cause damage and discoloration.
