
WARRANTY
Vipp oers warranty on products according to national laws and regulations. The warranty does not cover defects or damage
caused directly or indirectly by misuse or poor maintenance, violence or manipulation.The warranty presupposes rightful use as
described in Vipp’s care instructions, which can be found in this folder or under the specifications of each product at vipp.com.
In case of a defective product, please contact your place of purchase.
ASSEMBLY GUIDE
PRODUCT DESCRIPTION
The Vipp675 Chimney Cabinet is made to store your possessions; four open
rooms for the things you don’t mind showing o, completed with a premounted
illumination and for the rest, a reeded aluminum door provides cover. On top of
this, a submersed marble plate oers an almost tray-like function.
Materials
Aluminum, grey marble, oak veener
LED Light, 12,9W 24 DC, 2 m Euro plug wire
Dimensions
L. 176.8 cm / 69.6 in
D. 38 cm / 14.9 in
H. 68.1 cm / 26.8 in
CARE INSTRUCTIONS
Oak veneer
Gentle, regular cleaning is recommended. Wipe down the oak veneer with a soft damp
cloth, possibly with a mild detergent. Make sure to wipe off the surface after cleaning
with water. Allow the water to evaporate or dry with a dry cloth. Placement of objects on
a wet or damp surface can cause marks on the lacquer. These marks are not possible to
fix and are not eligible for complaints.
Avoid using sponges or coarse cloths as this might damage the surface. The oak veneer
should be treated as any other wooden material.
Do not use sandpaper or similar, as this can damage the protective layer of the surface.
A patina will emerge over time.
Marble
Gentle, regular cleaning is recommended. Dust off the surface regularly and wipe down
the marble with a damp cloth when needed. If necessary, add a mild, acid-free detergent.
Remove the detergent with a clean damp cloth. Marble does not tolerate any kind of acid
(juice, wine, ketchup etc.) Marble is sensitive and should be treated cautiously. Always
use coasters for drinking glasses and rivets for hot items to keep your table beautiful and
free from marks and stains.
Remove stains by immediately using a lint-free cleaning cloth with warm water and a mild
detergent. Avoid using dusting sprays or abrasive cleaners. In case of serious damage
contact a professional polisher.
Read more about care instructions on vipp.com.
2. Place the horizontal base as illustrated. Install the four legs using the included screws,
making sure to check the appropriate up/down direction of base and that the long cross bars
are raised above the end bars.
1. Join the two cabinets using the 4 included screws and barrel nut. 3. Align the holes in the legs with the pre-drilled holes in the cabinets and insert the included
screws.
4. Place the stonetop in the designated area.
4x
4x
8x
8x