VIS DirectForce Pro User manual

DirectForce Pro
Installation Manual

Parts List
VirtualRacingSchool.com
MiGE Motor
DFP-M-##
Mounting Bracket
DFP-MB-##
Hub Adapter
DFP-MH-##
Button Plate
DFP-WP-##
Emergency Stop
DFP-ME-##
Steering Wheel Rim
DFP-W-##
DirectForce Pro Controller
DFP-C-##
Note: Images are not to scale.
Wheel Base Steering Wheel
Other Accessories
DirectForce Pro

Solution Overview
MiGE Motor
VRS Steering Wheel Rim
(Optional)
Mounting
Hex Screws
Hub Adapter
(Optional)
VRS Button Plate
(Optional)
Mounting Bracket
(Optional)
Emergency Stop
(Optional)
VRS Controller
VirtualRacingSchool.com
DirectForce Pro

1
4
2
5
3
6
Attach the left and right side mounts to the
Motor Mount with the provided (4) M8 Short Cap
Screws, (4) M8 Lock Nuts, and (8) 8mm Washers.
Attach the mounting bracket to the Motor using
(4) M8 Long Cap Screws, (4) M8 Lock Nuts, and
(8) 8mm Washers.
Make sure the assembly is rmly tightened.
Make sure the assembly is rmly tightened. Mount the Motor to your desk/rig.
Plug the two motor cables into the motor and
into the back of the Controller. Also, plug in the
Emergency Stop (if available).
VirtualRacingSchool.com
Installation DirectForce Pro

7
10
8
11
9
12
Connect the controller to your PC via the
provided USB cable.
Download the software onto your computer:
https://virtualracingschool.com/downloads/DFP
Flip the power
switch on the
controller to the
ON position.
Install and launch the conguration tool.
Center the wheel and save settings. Start
with a low “Max Force” and work your
way up until you’re comfortable.
For more information, please visit
VirtualRacingSchool.com/DFP
With the power
switch in the
OFF position,
plug the power
cable into the
back of the
controller.
VirtualRacingSchool.com
Installation DirectForce Pro