Vision CS-1300 User manual

1
CS-1300_manual_en_v1
CS-1300 OWNERS MANUAL
www.visionaudiovisual.com/techaudio/cs-1300

2
CS-1300_manual_en_v1
CS-1300 OWNERS MANUAL
Thanks for choosing the Vision CS-1300! In order to obtain the best performance please be sure
to read this owner’s manual and use your product only in accordance with the instructions.
CONFORMITY
The product described in this owner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. Certificates including SGS reports
are available on request. This product should be returned to the place of purchase at the end of
its useful life for recycling.
WARNINGS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan
Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park,
Clifton Moor, York, YO30 4GH.

3
CS-1300_manual_en_v1
POWER HANDLING
Power rating with regards to loudspeakers denotes the “power handling” of the speaker, not the
“power output”. These speakers are rated to accept up to 70 watts RMS.
WATT MEASUREMENT STANDARDS
There are various ways of measuring an amplifier wattage output. The most accurate standards
are “Program Power” and “RMS” (Root Mean Squared) because these standards measure
average sustained levels, but even for these standards there are different ways of measuring
them. Amplifiers between 30 to 100w are suitable for these speakers.
PACKAGING
Save all packing material. It is essential for shipping in the event the unit ever needs repair.
IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE,
DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.
INSTALLATION INSTRUCTIONS
1. Decide on speaker placement. Speakers should be evenly spaced throughout the room for
even dispersion.
2. Cut a hole in the ceiling. For best results use a 210mm holesaw which fits to a standard
power drill (part number: Starrett STRHS210, plus a Starrett Arbor to fit it to your drill).
Alternately, if you use a jigsaw or handsaw attach the cardboard template to the ceiling
and use as a cutting guide. If you are cutting directly into a ceiling panel, beware of power
cables in the plenum void. If you are cutting into a ceiling tile, remove it from the ceiling
and cut at floor level.
3. Fit the speaker into the hole, with the clamp fittings on the rear of the speaker turned
inward. The intial turn of each screw on the front of the speaker will turn the clamps
outward - continue to tighten clamps to the ceiling. Avoid over-tightening.

4
CS-1300_manual_en_v1
SPECIFICATIONS
• Speaker Dimensions: 235 x 105mm
(91/4 x 41/8”)
• Cutout Size: 202mm (8”)
• Mounting Depth: 95mm (33/4”)
• Speaker Weight: 3.2kg per pair
• Power Handling: 30w RMS
• Woofer: 6.5”
• Tweeter: 1” Silk
• Speaker Terminals: Bare-wire spring
type
• Nominal Impedance: 8 Ω
• Sensitivity: 89dB (1w/1m)
• Frequency Response: 80Hz-20kHz
Frequency Response Graph:
Impedance Graph:

5
CS-1300_manual_en_v1
WARRANTY
This product comes with a 2-year return to base warranty, effective from the date of purchase.
This warranty applies only to the original purchaser and is not transferable. For the avoidance of
doubt, this will be taken from the information held by the appointed national distributor at the
point of sale. If the product is DOA (dead on arrival), you have 21 days from purchase date to
notify the national distributor via your AV reseller. The liability of the manufacturer and its
appointed service company is limited to the cost of repair and/or replacement of the faulty unit
under warranty, except for death or injury (EU85/374/EEC). This warranty protects you against
the following:
• Failure of any components, including the power supply.
• Damage when the product is first removed from its packaging if reported within 24 hours of
purchase.
If you find you do have a problem with this product, you should contact the AV reseller you
purchased this product from. The original purchaser is responsible for shipment of the product
to the manufacturer’s appointed service centre for repair.
We will endeavour to return repaired units within 5 working days, however this may not always
be possible, in which case it will be returned as soon as practicably possible. In line with our
WEEE commitments, the manufacturer endeavours to replace the faulty parts of the product
rather than replacing the whole unit. This warranty does not protect this product against faults
caused by abuse, misuse, incorrect installation, unstable or faulty power input, which might be
caused by ignoring the guidelines set out in this manual.
LEGAL DISCLAIMER: Because we are committed to improving our products, the details above
may change without prior warning. This User Manual is published without warranty and any
improvements or changes to the User Manual necessitated by typographical errors, inaccuracies
of current information, or improvements to programs and/or equipment, may be made at any
time and without notice. Such changes will be incorporated into new editions of the User
Manual.