VISIONAUTE RAILDOME FREEMOTION 8 User manual

www.raildome.com
INSTALLATION MANUAL
RAILDOME FREEMOTION 8
09/02/2023

3
Ref. : VZC-SUPU
Ref. : VZC-RAIL3
Ref. : VZC-RAE
Ref. : VFM-CJR
Ref. : VZC-ECLIS6
Ref. : VZC-EB6 Ref. : VZC-CPT3
M6 washers
Ref. : VZC-RM6
Bolt 6x8 mm
Ref. : VZC-VIS608
Bolt 6x12 mm
Ref. : VZC-VIS612
M6 nut
Ref. : VZC-ECRM6
Gland
Ref. : VZC-PE
Clip
Ref. : VFM-CLIP
T-nut
Ref. : VZC-ECRT
Female Velcro (loops)
for the cover
Ref. : VZC-BFF
Male Velcro (hooks)
for the rail
Ref. : VZC-BFM
DESCRIPTION OF RAILDOME COMPONENTS
Aluminium rail extrusions in 3 m sections
Power rail
Electrical junction clip
Rail end-cap Mirror-nish cover + gloves
Connecting shplate U attachment bracket
Hardware

4
The camera slider
DESCRIPTION OF ELEMENTS COMPONENTS RAILDOME
TRANSMITTER
BATTERY
HIGH DEFINITION DOME ZOOM X20
ELECTRONIC CARD
ENGINE MANAGEMENT
RECEPTION OF DATAS
Ref. : RA-EXTAR
Ref. : RA-CHA8
Ref. : RA-EXTDARef. : VZ-CPN-IPRef. : RA-CMERef. : RA-TCERef. : RA-ALIMD
Extremity bumper Rail
Stop
Extremity bumper Rail
Start Power supply
Positioners
Magnetic Interface keyboard (optional)
Remote controlPower Plate
EMISSION RADIO

MOTOR
Elements weights
Camera slider : 8.00 kg
Rail bar (3 m) : 14.90 kg
Routeur
BACK
FRONT

5

220V -AC
RJ45
The Raildome is connected with:
- A 220V 2 amp power supply
- A cable RJ45
Connection to the outside environment
Optimal scheme for installing routers with two Rails connected
GENERAL INSTALLATION DIAGRAM
1
1
2
2
Main rail
Ref. VZC-RAIL3
Power Plate
Ref. RA-ALIMD
Power rail
Ref. VZC-RAE


Ref. RA-CME
Extremity bumper
Rail Stop
Ref. RA-EXTAR
Extremity bumper Rail Start
Power supply
Ref. RA-EXTDA
1
2
Router
Router
Router
Router
Routeur
Router
Rail 1
Rail 1
Rail 1
Rail 2
Rail 2
Rail 2
PERFECT
OK
FORBIDDEN
!



!
BACK FRONT

6
LIST OF TOOLS REQUIRED FOR INSTALLATION:
SUPPLIES :
TOOLS AND SUPPLIES NEEDED FOR INSTALLATION


 
 













Ref : VZ-TESTFIP
Recommended equipment
IP, HD-SDI, WIFI TESTER :








- POE tester



7


 
    
 
 

 
Phase 2- Rail assembly


 
 
 
 
  
 
 
 
 
 

 
 
RAILDOME INSTALLATION PROCEDURE

8


9


deburring
Phase I - 1/5
1. LAY OUT ALL OF THE RAIL SECTIONS ON THE GROUND.





Extremity bumper Rail Start
Power supply
Extremity bumper
Rail Stop

10

40mm
38mm
Ø 20mm
Phase I - 2/5
2. 2. DRILL THE RAIL FOR INSTALLATION OF THE GLANDS
Top view
Ø 20mm
38mm
Important 
Phase I - 3/6
3. CLEAN THE RAIL
Extremity bumper Rail Start Power supply
Do not use corrosive or abrasive products to clean the rail.

11
                




Instal Velcro hook side




Velcro rought side (Hook)
for the rail
Ref. VZC-BFM

for the cover.
Ref. VZC-BFF
Phase I - 3/5
4. 
Velcro hook and loop fastener 
Capotage miroir
WARNING :


Do not use corrosive or abrasive products to clean the rail.

12

    
    
    
   










(Ref. VZC-VIS612)
6 washers (Ref. VZC-RM6)
(Ref. VZC-VIS608)
(Ref. VZC-RM6)



Phase I - 4/5
5. POSITION THE JUNCTION FISHPLATES AND THE U ATTACHMENT
BRACKETS IN THE RAIL SECTION CHANNELS




Rail channels 
(Ref. VZC-ECLIS6)


Extremity bumper Rail
Start Power supply
Extremity bumper
Rail Stop

13



- One U bracket
- 
Top view of rail : standard case.



3 meters
Add U bracket + shplates
+ 6x12 bolts + M6 washers. Removal of U bracket and replacement
of 6x12 bolts by 6x8.
3 meters
Phase I - 5/5
6. POSITION THE JUNCTION FISHPLATES AND THE U ATTACHMENT
BRACKETS IN THE RAIL SECTION CHANNELS
Examples :




14
PHASE II - Rail assembly

15
2
2
2
2
         

 

 2

        


by threaded rod




2

         

3
 

3
3
or
Phase II - 1/11
1. ATTACH THE RAIL SECTIONS TO THE CEILING USING
THE U MOUNTING BRACKETS AND THE CONNECTION FISHPLATES.

OK
INCORRECT
ALIGNMENT

1
1
Rail
Ceiling
Middle of Raildome

16
Fastening of the retaining clips for the electrical power rail
Phase II - 2/112. ATTACHING THE ELECTRICAL POWER RAILS TO RAIL PROFILES



the rail 1
 2
        
 4

      5    
       
 6
 71 2 3


  

    



M
Ref. VZC-RAIL3
Clip
Ref. VFM-CLIP 

The slot must face
the inside of the rail.
20 cm 5 cm

Ref. VZC-RAIL3


 
Power supply rail
Ref. VZC-RAE
20 cm
4
5
6 7

17
Phase II - 2/11
2. ATTACHING THE ELECTRICAL POWER RAILS TO RAIL PROFILES
           
        1     

Clip de

Ref. VFM-CJR
Clip
Ref. VFM-CLIP
M
Ref. VZC-RAIL3


Ref. VZC-RAE
1


1

      


18








Phase II - 3/11
3. INSTALL THE EXTREMITY BUMPER RAIL STOP




        
        




19
Phase II - 4/11
4. INSTALLATION OF MAGNETIC POSITIONERS
         
          






Ref. RA-CME
Power rail
Ref. VZC-RAE
85 cm
85 cm
Extremity bumper Rail
Start Power supply
Extremity bumper
Rail Stop
1
1
+
-
Power rail
Ref. VZC-RAE


Ref. RA-CME



20
Phase II - 5/11
5. INSTALL THE RAILDOME COMPONENTS INTO THE RAIL
CAMERA SLIDER
Ref. RA-CHA8
Extremity bumper
Rail Stop
Ref. RA-EXTAR
    
      plug
      



    
    
    
     





   
   
   
    

     
   

1
2
2


1
BACK
FRONT