Description
1. Elegant, compact oval shaped transparent housing
2. Infrared & Blaster Circuitry is built into the transparent housing
3. 10 foot/3.0M cable is terminated with a 3.5mm mono plug
4. Nominal transmission range: 30 feet/10M
5. Nominal transmission angle: 45 degrees off-axis
6. Pressure Sensitive Adhesive (PSA) tape for easy attachment on
any hard, clean and dry surface
7. Set the Dip switches to (BL ON) when using our C61 Block
Installation
Diagram 1: IR Blaster Emitter Attached To The Shelf
1. Attach IR blaster emitter above or just below of the IR window
2. Less reliable activation
Diagram 2: Product Description
Diagram 3: Rack/Cabinet Installation
NOTE:
1. IR blaster emitter must be attached with round shape facing components.
2. Be sure the mounting surface is lean and dry to ensure proper attachment.
3. Do not connect BP10 directly to power supply or battery. You must use the C61 Vista
Acoustics connecting block.
BP10 Powerful IR Blaster With 2 High Output Emitters
PRODUCT INFORMATION AND INSTALLATION GUIDE
In North America contact:
Trends Electronics International Inc. - 100 – 980 West 1st Street. North Vancouver, B.C. V7P 3N4
SHELF
SHELF
SHELF
SHELF
SHELF
BP10
2 METERS / 78 INCHES
IR RECEIVER
IR RECEIVER
IR RECEIVER
IR RECEIVER
SHELF
SHELF
SHELF
SHELF
SHELF
BP10
IR RECEIVER
IR RECEIVER
IR RECEIVER
IR RECEIVER
BP10
SHELF
SHELF
SHELF
SHELF
BP10
IR RECEIVER
IR RECEIVER
IR RECEIVER
BASS TREBLE BALANCE
VOLUME
TAPE 1
MONITOR TAPE 2 VCR LD AUX CD
PHONES
EXTRA
SPEAKERS AM FM MONO
SEARCH
TUNE
PRESET
FM
STEREO
CENTER
TUNE
MODE STORE
TUNE
VIDEO
SHELF
SHELF
BP10
SELF-ADHESIVE
INFRARED DIODE
INFRARED
TRANSPARENT
HOUSING
3.5MM MONO PLUG
10 FEET WIRE
+
-
Figure 1:
BP10 placed at the bottom of the
cabinet controlling a stack of com-
ponents.
Figure 2:
BP10 placed at the bottom and top
of the cabinet controlling a tall stack
of components.
Figure 3:
BP10 placed facing the cabinet
door controlling a stack of compo-
nents by reflecting infrared com-
mands