Vista Simplicity Cellular Shades TDBU User manual

CELLULAR SHADES – TDBU |
Simplicity Rechargeable Motorization
Quick Start Guide
Your shade has come pre-programmed from the factory. Follow these easy steps to get started.
2. Mount the shade. 3. Your shade is now ready! Select the
programmed channel, then the rail, and use the
UP and DOWN arrows to operate the shade.
For more in depth motorization programming instructions, please visit vistaproducts.com/guides
V
ista
Setting/Using a Favorite Position
NOTE: Make sure there is only one shade programmed to the channel when setting a favorite position.
If more than one shade is set, please see UNLINK A SHADE in the Simplicity guide at vistaproducts.com/guides.
1. Using the UP and DOWN arrows,
position Rail No. 1 and Rail No. 2
to the desired Favorite position.
2. To save the Favorite position;
select Rail No. 3, then hold the LIMIT button
and the UP button at the same time.
Release after a series of short beeps.
3. Press the STOP/FAVORITE button to
move the shade to the set Favorite position.
NOTE: Make sure shade is fully stopped
before using the Favorite position.
Connect
Connect
External Battery for shades under 36'' wide
1. Connect the motor and battery
in the headrail (as shown).
Rail No.
Channel

Removing and Adding Channels
Channels can be removed from the remote if not all 14 are needed. They can also be added back to the remote once removed.
Follow these steps to remove or add channels from your remote.
For more in depth motorization programming instructions, please visit vistaproducts.com/guides
1. Press and hold the UP and DOWN buttons at the same time.
e display will ash the current maximum number of channels.
Release the buttons.
3. Once the desired amount of channels is set,
press and hold the RAIL SELECTOR and
CHANNEL buttons until the display stops
ashing to conrm your choice.
2. Once the buttons have been released, use the
UP and DOWN buttons to select the amount of
channels you would like on the remote.
11/18K2188