Visual Sound V3 Series Route 66 User manual

V
3
COMP TONE VOL
TONE
CLEAN MIX
ON - OFF
GATE
COMP TONE VOL
TONE
CLEAN MIX
ON - OFF
GATE
COMP TONE VOL
TONE
CLEAN MIX
ON - OFF
GATE
COMP TONE VOL
TONE
CLEAN MIX
ON - OFF
GATE
COMP TONE VOL DRIVE TREBLE VOL
TONE
A - B
VOICE
BASS CLEAN MIX
Juicy Drive (OD + COMP)
ON - OFF
GATE
CLEAN MIX
Route 66
–
Sample Settings
COMP TONE VOL DRIVE TREBLE VOL
TONE
A - B
VOICE
BASS CLEAN MIX
Big Dirty Rhythm (OD + COMP)
ON - OFF
GATE
CLEAN MIX
(Guitar)
A - B
VOICE
BASS CLEAN MIX
Sustained Attack C ean Boost Smoothing Comp
Dyna Ross Scream-ish
BASS CLEAN MIX
70’s Drive
BASS CLEAN MIX
Ha f & Ha f
BASS CLEAN MIX
Drivetrain
DRIVE TREBLE VOL
DRIVE TREBLE VOL DRIVE TREBLE VOL
DRIVE TREBLE VOL
A - B
VOICE
A - B
VOICE
A - B
VOICE

www.visua sound.net
V
3
COMP TONE VOL DRIVE TREBLE VOL
TONE
A - B
VOICE
BASS CLEAN MIX
Big Dirty Bass (OD + COMP)
ON - OFF
GATE
CLEAN MIX
(Bass)
Route 66
–
Sample Settings
COMP TONE VOL
TONE
CLEAN MIX
ON - OFF
GATE
NOTES:
The V3 Series Route 66 is trul 2 pedals in 1 housing. For basic setup, use the Compressor
input and the Overdrive output. You ma also change the order of effects b plugging our
guitar or bass into the OD input, use a short cable from the OD output to the Comp input, and
then go out from the Comp output. For an thing other than the basic setup, just think of
Route 66 as 2 pedals.
B removing the 4 screws and the bottom cover, ou can see 2 slide switches. Use these to
choose true b pass or our Pure Tone buffered b pass for each channel.
If ou have a batter installed, make sure to unplug both Input and Output when not using.
Then again, wh are ou using a batter ??? Get a 1 SPOT!
If ou ever have an questions or problems with our Route 66, just go to the Visual Sound
website and contact our customer service. We’re here to help ou!
BASS CLEAN MIX
SVT
DRIVE TREBLE VOL
Bass Comp
A - B
VOICE
COMP TONE VOL DRIVE TREBLE VOL
TONE
A - B
VOICE
BASS CLEAN MIX
Grow er (OD + COMP)
ON - OFF
GATE
CLEAN MIX