Vitek VTD-MV-VN User manual

VITEK
ENVI Series
ENVI Series 1.3 & 2.0MP Vandal
Resistant Dome Camera Series
• 1/3” 1.3 & 2.0 Megapixel Progressive Scan CMOS image sensors
• Up to 30fps live view @ 1920x1080p (2.0 MegaPixel Models) / 1280x1024 (1.3
MegaPixel Models)
• 2.8-10mm Varifocal Auto Iris Lens
• 35 Infrared LED’s with 120’ Range (VRN Models)
• 2D-DNR / 3D-DNR Noise Reduction
• 16:9 (2.0 MegaPixel Models) / 4:3 (1.3 MegaPixel Models) Video format
• Secondary video output for installation & maintenance
• Auto True Day Night (TDN) without focus shift is achieved with dual filter switch
function
• H.264/MJPEG Dual Streaming
• Minimal Latency w/Max 16 User Connections
• Onvif PSIA Compliance
• SD memory card slot for Local recording
• True Mechanical Day/Night function
• 3-Axis Mount to help achieve any Viewing Angle
• Fully Gasket Sealed with an IP68 Water tight NEMA Rating
• Extensive mounting options available
• 1” Conduit Knockout
• 12VDC/24VAC & PoE (Power over Ethernet) Operation
• Available in Ivory or Black
Specifications & installation procedure subject to change without notice.
Visit www.vitekcctv.com for the most current information available.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
1
Table of Contents
1. Box Contents............................................................................................................................6
2. Included Accessories ................................................................................................................6
3. Available Accessories................................................................................................................6
3.1. Optional Mounts & Accessories......................................................................................6
4. Mighty Dome Layout.................................................................................................................7
5. VTD-MV-VN / VTD-MV-VRN Installation .....................................................................................8
5.1. Attaching Dome to Mounting Location (Flush / Surface Mount) .......................................8
5.2. Junction Box Installation...............................................................................................8
5.3. Connections.................................................................................................................9
6. Camera Software Installation ..................................................................................................12
7. VTD-MV-VN / VTD-MV-VRN Features.......................................................................................15
8. IP Installer: Introduction.........................................................................................................16
9. Installing and Uninstalling.......................................................................................................16
9.1. Installing IP Installer ..................................................................................................16
9.2. Uninstalling IP Installer...............................................................................................19
10. Using IP Installer .................................................................................................................22
10.1. Starting the Program ..................................................................................................22
10.2. Search Product...........................................................................................................23
10.3. Manual Network Setup................................................................................................24
10.4. Automatic Network Setup............................................................................................26
10.5. Using DHCP Server.....................................................................................................29
10.6. Using PPPoE...............................................................................................................29
10.7. Updating Firmware.....................................................................................................31
10.8. Filter Configuration.....................................................................................................33
10.9. Live View ...................................................................................................................34
11. ENVI Admin Menu................................................................................................................36
11.1. Entering Admin Menu .................................................................................................36
11.2. Admin Menu Structure ................................................................................................37
12. Quick Configuration..............................................................................................................37
12.1. Step 1: Changing Server Name....................................................................................37
12.2. Step 2: Time Setup.....................................................................................................37
12.3. Step 3: Network Setup................................................................................................37
12.4. Step 4: IPCCTVDNS.COM............................................................................................38
12.5. Step 5: Recording Configuration..................................................................................38
12.6. Finish.........................................................................................................................38
13. System Configuration Menu ..................................................................................................38
13.1. Server Name Setup.....................................................................................................38

ENVI Series: VTD-MV-VN / VTD-MV-VRN
2
13.2. Date & Time...............................................................................................................39
13.3. Admin Password.........................................................................................................40
13.4. Access Control............................................................................................................40
13.5. User Registration........................................................................................................40
13.5.1. Add.................................................................................................................40
13.5.2. Edit.................................................................................................................42
13.5.3. Delete.............................................................................................................42
14. Network Configuration..........................................................................................................42
14.1. Static IP Configuration................................................................................................43
14.2. DHCP Client Configuration...........................................................................................43
14.3. PPPoE Configuration...................................................................................................44
14.4. Network Ports ............................................................................................................44
14.5. Bandwidth Control Configuration .................................................................................45
14.6. View Network Status...................................................................................................45
14.7. Network Status Notify.................................................................................................46
14.8. IP-CCTV DNS Setup....................................................................................................47
14.9. Port Forwarding & UPnP .............................................................................................48
14.10.RTP/RTSP Setup.........................................................................................................49
15. Device Configuration ............................................................................................................51
15.1. Privacy Zone ..............................................................................................................51
15.2. Camera & Motion .......................................................................................................53
15.2.1. Camera Configuration.......................................................................................55
16. Advanced Configuration........................................................................................................59
16.1. Advanced Services......................................................................................................60
16.1.1. E-mail Service Configuration.............................................................................61
16.1.2. FTP (Buffered) Service Configuration.................................................................64
16.1.3. FTP (Periodic) Service Configuration..................................................................66
17. Recording Configuration for Cameras with microSD card ........................................................68
17.1. MicroSD Configuration ................................................................................................68
17.2. Recording Configuration with microSD card..................................................................71
18. Utilities................................................................................................................................74
18.1. System Log................................................................................................................75
18.2. Save Configuration .....................................................................................................75
18.3. Reboot.......................................................................................................................75
18.4. Factory Default...........................................................................................................76
18.5. System Update...........................................................................................................76
19. ENVI Series Viewer...............................................................................................................79
19.1. Introduction...............................................................................................................79
19.2. Key Features..............................................................................................................79

ENVI Series: VTD-MV-VN / VTD-MV-VRN
3
19.3. System Requirement for PC.........................................................................................79
20. Installing and Uninstalling.....................................................................................................80
20.1. Installing ENVI Series Viewer ......................................................................................80
20.1.1. Installing on Web Browser................................................................................80
20.1.2. Manual Installation...........................................................................................82
20.2. Uninstalling ENVI Series Viewer...................................................................................83
20.2.1. Uninstalling with Program Menu........................................................................83
20.2.2. Uninstalling on Control Panel ............................................................................84
21. Starting ENVI Series Viewer..................................................................................................85
21.1. Control Bar ................................................................................................................86
21.2. Channel Control Bar....................................................................................................87
21.3. OSD Channels Buttons................................................................................................87
21.3.1. Saving as Image File........................................................................................87
21.3.2. Saving as Video File .........................................................................................88
21.3.3. Manual Recording ............................................................................................88
21.3.4. Instant Playback ..............................................................................................89
21.4. Extended Features......................................................................................................90
21.4.1. Pausing Live Video...........................................................................................90
21.4.2. FPS Control .....................................................................................................90
21.4.3. Flip Control......................................................................................................91
22. EN-V-R: Introduction............................................................................................................92
23. Requirements for Installation................................................................................................93
23.1. EN-V-R Versions.........................................................................................................93
23.2. System Requirement for PC.........................................................................................93
24. Installing EN-V-R..................................................................................................................94
25. Uninstalling EN-V-R..............................................................................................................96
25.1. Closing Active EN-V-R.................................................................................................96
25.2. Executing Uninstaller ..................................................................................................97
26. Components of EN-V-R Program ...........................................................................................98
26.1. EN-V-R Configurator ...................................................................................................98
26.2. EN-V-R Service...........................................................................................................98
26.3. EN-V-R Controller .......................................................................................................98
26.4. EN-V-R System Tray Menu..........................................................................................99
27. Starting EN-V-R Configurator ................................................................................................99
28. Quick Start Guide...............................................................................................................101
28.1. EN-V-R Configurator User Interface ...........................................................................101
28.2. Searching for IP Devices...........................................................................................102
28.3. Registering IP Devices ..............................................................................................103
28.4. Viewing Live Video ...................................................................................................106
28.5. Recording Video.......................................................................................................107

ENVI Series: VTD-MV-VN / VTD-MV-VRN
4
29. ENVI Smart Player..............................................................................................................112
29.1. Introduction.............................................................................................................112
29.2. Key Features............................................................................................................112
29.3. System Requirement for PC.......................................................................................112
30. Installing and Uninstalling...................................................................................................113
30.1. Installing Smart Player..............................................................................................113
30.1.1. Manual Installation.........................................................................................113
30.2. Uninstalling Smart Player ..........................................................................................115
30.2.1. Uninstalling on Program Menu ........................................................................115
31. Configuring & Viewing Player..............................................................................................125
31.1. Main Window View ...................................................................................................126
31.2. Connecting to NVR Player .........................................................................................127
31.3. Creating a Group......................................................................................................127
32. Searching Video.................................................................................................................129
32.1. Searching Video .......................................................................................................129
32.2. Daily Search.............................................................................................................129
32.2.1. Search Mode..................................................................................................130
32.2.2. GO to Time Position .......................................................................................130
32.3. Condition Search Mode .............................................................................................130
32.3.1. Advanced Search Mode ..................................................................................131
33. Video Playback Controls......................................................................................................132
34. Extra Features ...................................................................................................................133
34.1. Window Control........................................................................................................133
34.2. Recording Period......................................................................................................133
34.3. Backup ....................................................................................................................134
34.4. Snapshot .................................................................................................................135
34.5. Print ........................................................................................................................136
34.6. Ratio Display............................................................................................................136
35. EN-V-R Configuration .........................................................................................................138
35.1. System, Network Configuration .................................................................................138
35.1.1. Configuring System name...............................................................................138
35.1.2. System, Network Configuration - Admin password ...........................................139
35.1.3. System, Network Configuration - Access Control..............................................139
35.1.4. System, Network Configuration - HTTP Port.....................................................140
35.1.5. System, Network Configuration–IP CCTV-DNS .................................................140
36. IP-CCTV DNS Registration ..................................................................................................141
37. IP-Device Registration........................................................................................................147
37.1. IP-Device Registration (Manual) ................................................................................147
37.2. IP-Device Registration (Automatic)............................................................................149
IP-Device Modification.................................................................................................151

ENVI Series: VTD-MV-VN / VTD-MV-VRN
5
37.3. IP-DeviceDeletion.....................................................................................................153
37.4. IP-Device Homepage................................................................................................153
37.5. Camera Management................................................................................................153
37.5.1. Configure Camera Name and Information........................................................154
37.5.2. Camera Resolution, Quality.............................................................................155
37.5.3. Configure Camera Recording Condition ...........................................................156
37.5.4. Alarm, Event Configuration.............................................................................159
37.6. User Management ....................................................................................................160
37.6.1. User Registration ...........................................................................................161
37.6.2. User Modification ...........................................................................................161
37.6.3. User Deletion.................................................................................................162
37.7. Disk Setup ...............................................................................................................162
37.7.1. Disk Setup.....................................................................................................162
37.7.2. Disk Quota Modification and Deletion..............................................................162
37.7.3. Disk Mode Change .........................................................................................163
37.8. Utilities ....................................................................................................................165
37.8.1. Email account Configuration ...........................................................................165
37.8.2. About Program ..............................................................................................166
38. Using EN-V-R Controller......................................................................................................167
39. Connecting to EN-V-R.........................................................................................................168
39.1. PC with EN-V-R installed ...........................................................................................168
39.2. PC without EN-V-R....................................................................................................169

ENVI Series: VTD-MV-VN / VTD-MV-VRN
6
1. Box Contents
1) Dome Camera
2) Accessories
3) VT-MD-2VOC (Secondary Video Output Cable)
4) CD & Mounting Template
2. Included Accessories
Torx Wrench
Type #: T20
Length: 63mm / Diameter: 4mm
Qty: 1
Phillips head Screws
For attaching the dome cover to the flush housing.
Type #: Phillips head M4x10
Length: 10mm / Diameter: 4mm
Qty: 4
Self Tapping Screws
For attaching the surface mount housing or the flush mount base
to a solid surface.
Type #: Phillips St4x30
Length: 30mm / Diameter: 4mm
Qty:4
Anchors
If necessary, use the anchor to help secure the self tapping screws.
Length: 30mm / Diameter: 7mm
Qty: 4
Secondary Video Output Cable for Mighty Domes:
VT-MD-2VOC
For viewing video image during installation.
Qty: 1
Mounting Template
Qty: 1
ENVI Series CD
Qty: 1
3. Available Accessories
3.1. Optional Mounts & Accessories
VT-MD/WMT
Mighty Dome Wall
Mount
VT-MD/CMT
Mighty Dome
Pedestal Ceiling
Mount
VT-MD/CNMT
Mighty Dome
Corner Mount
Adapter
VT-MD/PLMT
Mighty Dome Pole
Mount Adapter
VTD-MD-FMP
Mighty Dome Flush
Mount Decorator
Plate

ENVI Series: VTD-MV-VN / VTD-MV-VRN
7
4. Mighty Dome Layout
1) Lens
2) Power Input Connector(12VDC / 24VAC)
3) Ethernet RJ45
4) Camera Holder and 2nd Video output
5) Ball with the Camera Assembly
6) Safety Wire
7) Bubble
8) Dome Cover Ring
9) Flush Mount Base
10) Surface Mount Plate
11) Assembly Screws - Torx M4x9 (Vandalproof)
12) Assembly Screws - Phillips ST4x12 (Indoor) / Phillips M4x10 (Vandalproof / IR)

ENVI Series: VTD-MV-VN / VTD-MV-VRN
8
5. VTD-MV-VN / VTD-MV-VRN Installation
5.1. Attaching Dome to Mounting Location (Flush / Surface Mount)
1. Remove Dome Cover
Use the provided Torx wrench to unscrew the vandal proof screws and remove the dome
cover.
2. Flush Mount Installation
Using four St4x30 screws, attach the flush mount base to a sturdy surface. Optional flush
mount decorator plate. Model: VT-MD
3. Surface Mount Installation
Drill pilot holes at the mounting location using the provided mounting template. Using four
St4x30 screws, mount the surface mount housing to a sturdy surface. Using four ST4x12
(Indoor) screws or M4x10 (Vandal-proof) screws, attach the flush mount base to the surface
mount housing.
5.2. Junction Box Installation
Mighty Domes can easily be flush or surface mounted to an electrical junction box (4S J-Box) using the pre-
drilled mounting holes on either the surface mount housing or the flush mount base.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
9
5.3. Connections
1. Power
Depending on the type of installations, apply power to the camera by one of the three
options below.
a) Via Ethernet – Use only with POE switch (100 Meters max distance)
b) 12VDC - Use with 12VDC 500mA
c) 24VAC- Use with 24VAC for longer distances.
2. Ethernet connection
a) Insert one end of the Ethernet cable into the network jack of your camera, and insert the
other end into the data port (samples switch, router, etc)
3. Remove the dome cover from the camera using the torx wrench
4. Removable Storage
For recording directly on the camera you will need to install a microSD card, this will allow
you to play video directly from the camera. (Please use only class 10 microSD cards)
a) Remove the ball gimbal from the socket, and hold the base firmly with one hand.
b) Gently squeeze point A and B and pull away from the gimbal base until the gimbal cover
is removed from the base.
c) Insert the microSD memory card as shown below. (refer to Section 17.1MicroSD
Configuration on page 68for instructions on Formatting)

ENVI Series: VTD-MV-VN / VTD-MV-VRN
10
5. With the help of a hand held monitor (VTM-LCD351 not included) you can adjust the field of
view and focus of the camera.
a) Connect the secondary video cable (VT-MD-2VOC) between the camera and the monitor
BNC as shown below.
6. Lens Adjustment
a) Loosen Zoom & Focus screw and make necessary adjustments as shown.
Field of view: Telephoto(T) to Wide(W)
Focus: Near(N) to infinity (∞)
b) Once your “Lens adjustments” are done, reattach the gimbal cover to the gimbal base.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
11
7. Adjusting Camera View
The Gimbal mechanismyield’s maximum rotation and placements to archive the perfect
angle of view as show below.
8. After your camera and lens adjustments are done, place the dome cover back on to the
camera base, with the help of the torx wrench tighten the screws on the dome cover to avoid
weather damage to the camera.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
12
6. Camera Software Installation
1. Run IP Installer Software from the CD program on a computer that is on the same network
as the IP camera.
2. StartIP Installer, by double clicking the icon “IP Installer”
3. After the program has started, the main window of IP Installer program will appear on the
screen as shown below.
4. Search for the installed camera on the network by clicking the search product icon, the
camera should appear as the image below. The default IP address is 10.20.30.40
5. To assign an automatic IP address to this camera within the network, click the “Automatic IP
Setup” icon
6. Verify the Automatic IP address provided, enter the default password root and then click Set
as shown below.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
13
7. After the camera was configured by the program automatically, you will be able to get access
by
a) Right click over the camera information, “
Go Product Homepage ”
b) Click over the icon “
Connect Product Homepage ”
8. From the Home Page, you can “
Live View” or administrate “Admin” the camera.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
14
On Live View you will be able to see live video from your camera.
NOTE: For more information, refer to Section 11. ENVI Admin Menu on page 36.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
15
7. VTD-MV-VN / VTD-MV-VRN Features
VTD-MV-VN
1.3 & 2.0 MegaPixel Vandal Proof Mighty Dome Cameras with PoE & Varifocal Lens
•1/3” 1.3 & 2.0 Megapixel Progressive Scan CMOS image sensors
•Up to 30fps live view @ 1920x1080p (2.0 MegaPixel Models) / 1280x1024 (1.3 MegaPixel
Models)
•2.8-10mm Varifocal Auto Iris Lens
•2D-DNR / 3D-DNR Noise Reduction
•16:9 (2.0 MegaPixel Models) / 4:3 (1.3 MegaPixel Models) Video format
•Secondary video output for installation & maintenance
•Auto True Day Night (TDN) without focus shift is achieved with dual filter switch function
•H.264/MJPEG Dual Streaming
•Minimal Latency w/Max 16 User Connections
•Onvif PSIA Compliance
•SD memory card slot for Local recording
•True Mechanical Day/Night function
•Semi-Flush or Surface Mountable
•3-Axis Mount to help achieve any Viewing Angle
•Fully Gasket Sealed with an IP68 Water tight NEMA Rating
•Extensive mounting options available
•1” Conduit Knockout
•12VDC/24VAC & PoE (Power over Ethernet) Operation
•Available in Ivory or Black
VTD-MV-VRN
1.3 & 2.0 MegaPixel Vandal Proof Mighty Dome Cameras with 35 IR LED Illumination
•1/3” 1.3 & 2.0 Megapixel Progressive Scan CMOS image sensors
•Up to 30fps live view @ 1920x1080p (2.0 MegaPixel Models) / 1280x1024 (1.3 MegaPixel
Models)
•2.8-10mm Varifocal Auto Iris Lens
•35 Infrared LED’s with 120’ Range
•2D-DNR / 3D-DNR Noise Reduction
•16:9 (2.0 MegaPixel Models) / 4:3 (1.3 MegaPixel Models) Video format
•Secondary video output for installation & maintenance
•Auto True Day Night (TDN) without focus shift is achieved with dual filter switch function
•H.264/MJPEG Dual Streaming
•Minimal Latency w/Max 16 User Connections
•Onvif PSIA Compliance
•SD memory card slot for Local recording
•True Mechanical Day/Night function
•3-Axis Mount to help achieve any Viewing Angle
•Fully Gasket Sealed with an IP68 Water tight NEMA Rating
•Extensive mounting options available
•1” Conduit Knockout
•12VDC/24VAC & PoE (Power over Ethernet) Operation
•Available in Ivory or Black

ENVI Series: VTD-MV-VN / VTD-MV-VRN
16
8. IP Installer: Introduction
IP Installer is a proprietary utility program for VitekIP products. It enables users of Vitek products
to search their network for any Vitek network camera, video server, or network video recorder no
matter what IP address it has. By using IP Installer, users will be able to facilitate network setup
process for Vitek products deployment.
Runs on Microsoft Windows operating system (XP, Vista, 7, 8)
Search for Network Cameras, Video Servers, and Network Video Recorders
Capable of firmware updating
Support automatic and manual IP setup
9. Installing and Uninstalling
** It’s recommended to install this program as an administrator **
9.1. Installing IP Installer
If the program is started from the CD supplied with Vitek products, insert the CD in to CD/DVD tray
and check the installation file. If it is download or copied from the Internet or any other media,
locate the file from the PC’s hard drive. You will see the icon as shown with the file name IP
Installer_Setup_x.x.x.exe. The actual file name in your case may vary as the version changes.
Double click the icon to star installation.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
17
You may be prompted to continue running the installation program.
Click Yes button, then the following window will be shown on the screen.
To continue the installation, click Next. The following window will be displayed for location to
install.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
18
The default location for installation is C:\Program Files\IP Installer. It is recommended to install
in this folder, if you want to change it to a different location, click the Browse button to choose
location. Now click the Install button. You will see the progress of theinstall as shown below.

ENVI Series: VTD-MV-VN / VTD-MV-VRN
19
When the files are done copying, the following window will be shown. Click the Finish button to
complete the installation.
9.2. Uninstalling IP Installer
If you want to remove the IP Installer program from your PC, click Start > All Programs > IP
Installer > Uninstall.
You may be prompt to continue running theuninstall program.