Vitek VT-IPS-HDA2 User manual

●Front Panel
●Rear Panel
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
7
7
8
8
Micro SD card slot
Reset
PoE netowrk interface
TVI/CVI/AHD/CVBS Input
Analog video output
Grounding
Audio input
Alarm output
Audio output
Alarm input
Power indicator
RS 485 interface
AHD/TVI camera
Sound pickup
DC12V
Loudspeaker
PTZ
Monitor
Sensor Alarm out
DC12V power output
DC12V power input
A
H
D
S
o
D
C
1
2
V
M
o
n
i
t
o
r
LAN/
WAN
Package
Overview
2
3
TF
RESET
VIDEO I N
Audio
PWR
+ -
IN
OUT
DC12VOUT
Device Quick Start Guide CD
Plastic plug ×4
4 tapping screws PA 4×25
■If the product does not work properly, please contact your dealer
or the nearest service center. Never attempt to disassemble the
device yourself. (We shall not be responsible for any problems
caused by unauthorized repair or maintenance.)
■Keep away from liquid while in use.
■With the use of this product you must be in compliance with electrical
safety regulations.
■Do not use the device beyond specified voltage range
■ Do not drop it or subject it to physical shock.
■ If cleaning is necessary, please use clean cloth to wipe it gently.
■ Do not place it in extremely hot, cold (the operating temperature
shall be -20˚C~55˚C), dusty or damp locations.
■ To avoid heat accumulation, good ventilation is required for
operating environment.
1Warning and Caution
VT-IPS-HDA2
Transcendent 4 MegaPixel
H.265 HD Video Server with
Intelligent Analytics
FEATURES
• 4MP (2560 x 1440) Real Time Encoding
• 1 BNC Video Input Supporting AHD / TVI / CVI / CVBS Cameras
• Max. resolution: 2560 x 1440
• Triple Encoding: H.264, H.265, and MJPEG
• Micro SD card for EDGE Recording Supporting pre-alarm & Auto Cycle
Recording
• Fully Programmable Intelligent Analytics including Scene change, Video
Blur, Video Cast, Line Cross, and Intrusion
• 1 Alarm Input / 1 Alarm Output (RS485)
• Supports up to three simultaneous video streams (Individually Configu-
rable)
• Supports Up The COAX (CoC) Control
• 3 Regions of Interest (ROI)
• Two-Way Audio
• TVS 6000V lightning protection & surge protection
• Applications for iOS® & Android®
• Remote Viewing over the Internet via Web Browser or LAN
• Mac OS® Client & CMS Central Management Software Included
• 12VDC & PoE Operation
• 3 Year Warranty

MENU
Device
Network Cable Network Cable
Switch
Router Computer
TF
RESET
VIDEO I N
Audio
PWR
+ -
IN
OUT
DC12VOUT
● Access through IP Tool
The default network settings are as shown below:
IP address: 192.168.226.201 HTTP:80
Subnet Mask: 255.255.255.0 Data Port:9008
Gateway: 192.168.226.1
You may use the above default settings when you log in the device
for the first time.
①Make sure that the device and the PC are connected via LAN.
②Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
①Make sure that the device and the PC are connected via LAN.
②Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool.
③Modify the IP address and make sure its network address is in the
same local network segment as that of the computer.
④Open IE browser and input the modified IP address in the address
bar to log in the IE client. If it is the first time for you to log in, you
should download the Active X control and run it in the computer.
After that, input the default user name and password to login.
Device Network Search
Immediate Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192 168 226 . 201
255 255 255 . 0
192 168 226 . 1
i
Tip: Enter the administrator password, and
then modify the network paramete rs.
Total Device: 3 Local IP Address:192 168 1 4 Subnet Mask:255 255 255 0 Gateway: 192 168 1 1 DNS 210 21 196 6
Device Name Device Type IP Address Http Port Data Port Subnet Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration
Modify the IP address and gateway of the device and make sure its
network address is in the same local network segment as that of the
computer. Please modify the IP address of your device according
to the practical situation.
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192 168 1 . 201
255 255 255 . 0
192 168 1 . 1
Subnet Mask
Gateway
Accessing the device via LAN for example. In LAN,
there are two ways to access. 1. Access through IP Tool;
2. Directly Access through IE Browser
Network Connection
4
For example, the IP address of your computer is 192.168.1.4. So the
IP address of the device shall be changed to 192.168.1.X. After
modification, please input the password of the administrator and click
“Modify” button to modify the setting.
The default password of the administrator is “123456”.
④Double-click the IP address and then the system will pop up the IE
browser to connect the server. Download the Active X control and run
it in the computer. Then input the user name and password in the login
interface.
The default username is admin; the default password is 123456.
● Directly Access Through IE
Login
Name
Password
Stream Type
Language
Remember me
admin
1920x1080 25fps
English
③Modify the IP address. The default IP address of this device is
192.168.226.201. Click the information of the device listed in the
above table to show the network information on the right.
LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK
warrants to the purchaser that products manufactured by VITEK are
free of any rightful claim of infringement or the like, and when used
in the manner intended, will be free of defects in materials and
workmanship for a period of three (3) years, or as otherwise stated
above, from the date of purchase by the end user. This warranty is
nontransferable and extends only to the original buyer or end user
customer of a VITEK Authorized Reseller.
The product must have been used only for its intended purpose,
and not been subjected to damage by misuse, willful or accidental
damage, caused by excessive voltage or lightning.
The product must not have been tampered with in any way or the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become
necessary.
VITEK makes no warranty or guarantee whatsoever with respect to
products sold or purchased through unauthorized sales channels.
Warranty support is available only if product is purchased through a
VITEK Authorized Reseller.
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
Version 1.0
December 2017