Vitek VT-IPS-HDA2 User manual

VITEK
VITEK
VT-IPS-HDA2
Transcendent Series 4
MegaPixel H.265 HD Video
Server with Intelligent
Analytics
FEATURES
• 4MP (2560 x 1440) Real Time Encoding
• 1 BNC Video Input Supporting AHD / TVI / CVI / CVBS
Cameras
• Max. resolution: 2560 x 1440
• Triple Encoding: H.264, H.265, and MJPEG
• Micro SD card for EDGE Recording Supporting pre-alarm &
Auto Cycle Recording
• Fully Programmable Intelligent Analytics including Scene
change, Video Blur, Video Cast, Line Cross, and Intrusion
• 1 Alarm Input / 1 Alarm Output (RS485)
• Supports up to three simultaneous video streams (Individually
Configurable)
• Supports Up The COAX (CoC) Control
• 3 Regions of Interest (ROI)
• Two-Way Audio
• TVS 6000V lightning protection & surge protection
• Applications for iOS® & Android®
• Remote Viewing over the Internet via Web Browser or LAN
• Mac OS® Client & CMS Central Management Software
Included
• 12VDC & PoE Operation
• 3 Year Warranty

VT-IPS-HDA2
1
nPlease use the specified power supply to connect.
nDo not attempt to disassemble the Server; in order to prevent electric shock,
do not remove screws or covers.
nThere are no user-serviceable parts inside. Please contact the nearest
service center as soon as possible if there is any failure.
nAvoid incorrect operation, shock, vibration, do not place objects on top of
device which can cause damage to product.
nDo not use corrosive detergent to clean main body of the server. If necessary,
please use soft dry cloth to wipe dirt; for hard contamination, use neutral
detergent. Any cleanser for high grade furniture is applicable.
nPlease follow the instructions to install the server.
nDo not operate when temperature, humidity and/or power supply are beyond
the limited stipulations.
nKeep away from heat sources such as radiators, heat registers, stove, etc.
nDo not expose the product to the direct airflow from an air conditioner.
nThis is a product instructions only not a quality warranty. We reserve the
rights to amending the typographical errors, inconsistencies with the latest
version, software upgrades and product improvements, interpretation and
modification. These changes will be published in the latest version without
special notification.
nWhen this product is in use, the relevant contents of Microsoft, Apple and
Google will be used. The pictures and screenshots in this manual are only
used to explain the usage of our product. The ownerships of trademarks,
logos and other intellectual properties related to Microsoft, Apple and Google
belong to the above-mentioned companies.
nThis manual is available for many models. Some functions introduced in the
manual may be not available for some models. All pictures and examples
used in the manual are for reference only.

VT-IPS-HDA2
2
TABLE OF CONTENTS
1Introduction ................................................................................................... 3
2IE Remote Access ......................................................................................... 4
2.1LAN ..................................................................................................... 4
2.1.1Access through IP-Tool .......................................................... 4
2.1.2Directly Access through IE ..................................................... 5
2.2WAN.................................................................................................... 7
3Live View...................................................................................................... 10
4Remote Configuration................................................................................. 13
4.1System Configuration........................................................................ 13
4.1.1Basic Information.................................................................. 13
4.1.2Date and Time...................................................................... 13
4.1.3Local Config ......................................................................... 14
4.1.4Storage................................................................................. 14
4.2Image Configuration.......................................................................... 15
4.2.1Display Configuration ........................................................... 15
4.2.2Video / Audio Configuration.................................................. 16
4.2.3OSD Configuration ............................................................... 17
4.2.4Video Mask........................................................................... 18
4.2.5ROI Configuration................................................................. 18
4.3PTZ Configuration............................................................................. 19
4.4Alarm Configuration .......................................................................... 20
4.4.1Motion Detection .................................................................. 20
4.4.2Alarm In ................................................................................ 22
4.4.3Alarm Out ............................................................................. 23
4.4.4Alarm Server ........................................................................ 23
4.5Event Configuration (Optional).......................................................... 23
4.5.1Exception.............................................................................. 24
4.5.2Line Crossing ....................................................................... 25
4.5.3Intrusion................................................................................ 28
4.6Network Configuration ...................................................................... 30
4.6.1TCP/IP.................................................................................. 30
4.6.2Port....................................................................................... 31
4.6.3Server Configuration ............................................................ 32
4.6.4DDNS ................................................................................... 32
4.6.5SNMP ................................................................................... 34
4.6.6RTSP.................................................................................... 35
4.6.7UPNP ................................................................................... 36
4.6.8Email .................................................................................... 36
4.6.9FTP....................................................................................... 37
4.7Security Configuration....................................................................... 38
4.7.1User Configuration ............................................................... 38

VT-IPS-HDA2
3
4.7.2Online User .......................................................................... 40
4.7.3Block and Allow Lists............................................................ 40
4.8Maintenance Configuration ............................................................... 40
4.8.1Backup and Restore............................................................. 40
4.8.2Reboot.................................................................................. 41
4.8.3Upgrade................................................................................ 41
4.8.4Operation Log....................................................................... 42
5Search .......................................................................................................... 43
5.1Photo Search .................................................................................... 43
5.2Video Search .................................................................................... 44
5.2.1Local Video Search .............................................................. 44
5.2.2SD Card Video Search ......................................................... 45
6Appendix...................................................................................................... 46
Appendix 1 Q & A ............................................................................................... 46
Appendix 2: Specifications ............................................................................... 48
1 Introduction
This high-definition digital video Server (short for DVS) is designed for high
performance CCTV solutions. It adopts state of the art video processing chips. It
utilizes most advanced technologies, such as video encoding and decoding
technology, complies with the TCP/IP protocol, SoC, etc to ensure the system is
more stable and reliable.
Surveillance Application

VT-IPS-HDA2
4
2 IE Remote Access
You can connect the server via LAN or WAN. The details are as follows:
2.1 LAN
In LAN, there are two ways to access the server: 1. access through IP-Tool; 2.
directly access through IE browser.
2.1.1 Access through IP-Tool
Network connection:
�Make sure the PC and server are connected to the LAN and the IP-Tool is
installed on the PC from the CD.
②
Double click the IP-Tool icon on the desktop to run this software as shown
below:
③
Modify the IP address. The default IP address of this server is 192.168.226.201.
Click the information of the server listed in the above table to show the network
information on the right side. Modify the IP address and gateway of the server and
make sure its network address is in the same local network segment as that of the
computer. Please modify the IP address of your device according to the situation.

VT-IPS-HDA2
5
For example, the IP address of your computer is 192.168.1.4. So the IP address of
the server should be changed to 192.168.1.X. After modification, please input the
password of the administrator and click “Modify” button to modify the setting.
F
④
Double click the IP address and then the system will pop up the IE browser to
connect to the server. Download the plug-in and run it in your computer if it is the
first time for you to log in. Then input name and password in the login interface.
F
2.1.2 Directly Access through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
The default password of the administrator is “123456”.
The default username is “admin”; the default password is “123456”.

VT-IPS-HDA2
6
You may use the above default settings when you log into the server for the first
time. You may direct connect the server to the computer through a network cable.
�Manually set the IP address of the PC so the network segment is the same as
the default settings of the IP camera. Open the network and share center. Click
“Local Area Connection” to pop up the following window.
Select “Properties” and then select internet protocol according to the actual
situation (for example: IPv4). Next, click “Properties” button to set the network of
the PC.

VT-IPS-HDA2
7
②
Open IE browser and input the default address of server and confirm, then IE
will download the Active X control automatically.
③
Download the plug-in and run it in your computer if it is the first time for you to
login.
④
Input the default username and password and then click Login.
2.2 WAN
ØAccess through the router or virtual server
�Make sure the server is connected to the LAN and then log into the server and
go to ConfigàNetworkàPort menu to set the port number.
Port Setup

VT-IPS-HDA2
8
②
Go to Config àNetworkàTCP/IP menu to modify the IP address.
IP Setup
③
Go to the router’s management interface through IE browser to forward the IP
address and port of the server in the “Virtual Server”.
Router Setup example
④
Open IE browser and input its WAN IP and http port to access.
ØAccess through PPPoE dial-up
Network connection

VT-IPS-HDA2
9
You may access the server through PPPoE auto dial-up. The setting steps are as
follow:
①
Go to ConfigàNetworkàPort menu to set the port number.
②
Go to Config àNetworkàTCP/IPàPPPoE Config menu. Enable PPPoE and
then input the user name and password which you can get from your internet
service provider.
③
Go to Config àNetworkàDDNS menu. Before you configure the DDNS, please
apply for a domain name first. Please refer to DDNS configuration for detailed
information.
④
Open IE browser and input the domain name and http port to access.
ØAccess through static IP
Network connection
The setting steps are as follow:
�Go to ConfigàNetworkàPort menu to set the port number.
②Go to Config àNetworkàTCP/IP menu to set the IP address. Check “Use the
following IP address” and then input the static IP address and other parameters.
③Open IE browser and input its WAN IP and http port to access.