VITINNI JF07520217 User manual

For further assistance, other products and more, join us at:
Website: www.vitinni.co.uk
Instagram: @vitinniuk
Facebook: www.facebook.com/vitinni
Multi Chopper & Blender
PLEASE READ AND KEEP THESE INSTRUCTIONS FOR FUTURE USE
SAP Code: JF07520217
2
Thank you for choosing our Vitinni Multi Chopper and Blender. Please read this user
manual carefully and keep it for future reference. The manufacturer and importer do
not accept any liability if the information in these operation instructions is not
complied with. If you need any assistance, please contact our customer service
team on the details provided on the back page of this manual.
SAFETY INSTRUCTIONS
This appliance is for indoor use only.
This appliance is for domestic use only and should not be used for commercial
purposes.
Check that the voltage on the rating plate corresponds with that of the local network
before connecting the appliance to the mains power supply.
This appliance is not suitable for use by children.
This is not a toy - children should be supervised to ensure they do not play with the
appliance. Keep the appliance and its cord out of reach of children. Cleaning and
maintenance of the appliance should not be undertaken by children.
Appliances can be used by persons with reduced sensory and mental capabilities or
lack of experience and knowledge providing they have been given supervision or
instruction concerning the use of the appliance in a safe way and if they understand
the hazards involved.
If the appliance, power supply cord and plug are malfunctioning or they have been
dropped or damaged switch off the appliance and discontinue use immediately.
This appliance contains no user serviceable parts. Repairs should only be
undertaken by the manufacturer, its service agent or a similar qualified person.
If the power supply cord is damaged, it must be replaced by the manufacturer, its
service agent or a similar qualified person in order to avoid a hazard.
Keep the power supply cord away from sharp edges and parts of the appliance that
may become hot during use.
Do not use this appliance with an extension lead or multiple socket adaptor.
Do not use this appliance near an open flame or in moist or damp conditions.
Allow sufficient space around the Multi Chopper & Blender for ventilation and heat
dissipation. Place on a flat, stable, heat resistant surface a minimum distance of 5 to
10 cm from walls and other items.
Do not leave the appliance unattended whilst connected to the mains power supply.
Switch off the mains power supply and remove the plug by hand.

3
Always disconnect the appliance from the power supply before assembling,
disassembling or cleaning.
Do not immerse the motor unit, power supply cord or plug in water or any other
liquids. Care should be taken to avoid spillage on the electrical components, power
cord and plug.
Do not use any accessories or attachments with the appliance that have not been
supplied or recommended by the manufacturer.
Care should be taken when handling the sharp cutting blades, emptying the bowl
and during cleaning.
Caution: Misuse of the appliance could cause injury – do not use the appliance for
anything other than its intended use.
This product is fitted with a thermal cut-out to stop the motor unit from overheating. If
the thermal cut out activates, disconnect the power supply and leave the Multi
Chopper & Blender to cool for 30 minutes.
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
Cleaning and Maintenance
Unplug the Multi Chopper & Blender from the mains power supply and allow to cool
fully before performing any cleaning or maintenance.
Disassemble the unit and clean each piece individually. All parts should be cleaned
immediately after use. The glass bowl, cover and blades should be hand washed
with mild detergent. Do not submerge the motor unit in any kind of liquid, clean it
with a damp cloth and a small amount of mild detergent.
Storage
When the unit is not in use, it should be stored safety. Turn the unit off, unplug the
power cord from the outlet and store the unit in a cool dry place.
4
Specifications
Rating: 220-240V ~ 50/60 Hz
Power: 400 W
Food Capacities
List of Parts

5
BEFORE FIRST USE
Before use, check all accessories are complete and that the equipment is not
damaged. The Multi Chopper & Blender should be cleaned according to the
instructions in the Cleaning and Maintenance section. The Multi Chopper & Blender
should be run through an operational cycle before it is used for the first time.
When using the Multi Chopper & Blender for the first time a slight odour may be
emitted. This is normal and will soon subside.
NOTE: Care should be taken when handling the sharp cutting blades,
emptying the bowl and during cleaning.
Instructions
1. Always ensure meat and vegetables are cleaned and prepared thoroughly
before placing them into the unit. Remove any bones or skin from meat.
For any frozen meat or vegetables, make sure these are defrosted before
using the unit.
2. Fix the upper blade along the groove of the lower blade.
3. Fix the blade on the spindle, then hold the cutter bar with the hand revolving
to check whether the rotation and set up as correct. Please refer to below
picture:
4. Place the prepared vegetables or meat into the glass bowl:
6
5. Put the bowl cover on top of the glass bowl:
6. Place the motor unit onto the bowl cover and plug in the unit. Press down on
the power switch for 20 seconds to achieve the ideal consistency. If 20
seconds is not enough, loosen the motor unit and try again.
7. When the chopping and stirring has finished, turn off the power and make
sure the blades have stopped. Remove the motor unit, bowl cover and blades,
then pour out the meat and vegetables.
8. When the unit is not in use, it should be stored safety: turn the unit off, unplug
the power cord from the outlet and store the unit in a cool dry place.

7
WEEE Information
The symbol on this product or its packaging means that this product may not
be treated as household waste. It should be handed to an appropriate collection
point for the recycling of electrical and electronic equipment. Contact your local
council or household waste disposal service for further information.
Guarantee
Our products are guaranteed for a period of 2 years from the date of purchase.
Products that develop a fault within this period are covered by our warranty and we
will replace defective parts, or where not available the whole product. The warranty
does not apply to any defect in the goods arising from fair wear and tear, willful
damage, accident, negligence by you or any third party, use otherwise than as
recommended by us, failure to follow our instructions, any alteration or repair carried
out without our approval or has been the subject of commercial use. Your statutory
rights remain unaffected, in particular any rights you have under the Consumer
Rights Act 2015.
If you have a problem with your product within this warranty period please contact
our customer services team.
In the event of changes to the specification of a product and we are not able to
replace parts, we will replace the whole product within the 2 year guarantee period
For products that fall outside of the 2 year guarantee, we will endeavor to provide
spare parts to purchase for as many of the replaceable parts as possible, but cannot
foresee specification changes or upgrades to products or parts outside of the initial 2
year period.
8
Customer Services:
If you would like further advice or information on your product, ensure you have the SAP
code ready and please get in touch with us at Vitinni on the contact options below:
SAP Code: JF07520217
Phone: [phone] (Mon – Fri 9am to 5pm)
Email: [email protected]
Address: Vitinni, Vale Mill (Rochdale) Ltd, Robinson Street, Rochdale, OL16 1TA