Vivitar DLP-2100X User manual

DLP-2100X
Digital Projector User Manual
English
030531

Projector 1
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in commercial installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference that may cause undesired operation.

2DLP
Precautions
Safety Instructions
1. Read this manual before you operate your projector and keep it for future reference.
2. Check that the operating voltage of your unit is identical with the voltage of your
local power supply.
3. Should any liquid or solid object fall into the cabinet, unplug the unit and have it
checked by the qualified personnel before operating it further.
4. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
5. Unplug the unit from the wall socket if it is not to be used for several days. To
disconnect the cord, pull it out by the plug. Never pull the cord itself.
6. This product is capable of displaying inverted images for ceiling mount installation.
Please use suitable equipment for mounting the unit and ensure it is securely
installed.
7. Do not place the projector where the cord can be stepped on as this may result
in fraying or damage to the lead or the plug. Be alert to tripping hazards.
8. Do not look straight at the projector lens during the operation. The intense light
beam may damage your eyesight.
9. Do not place your hand or objects near the ventilation holes. The air coming out
is hot.
10. To avoid the risk of electric shock, never disassemble this appliance. Except as
specifically directed in this manual, do not attempt to service this product yourself.
Take it to a qualified technician when service or repair is required. Incorrect
reassembly can cause electronic shock when the appliance is subsequently used.
11. Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning the projector housing. Do not use liquid or aerosol cleaners.
12. Keep the plastic packing materials (from the projector, accessories and optional
parts) out of the reach of children as these bags may result in death by suffocation.
Be particularly careful around the small children.

Projector 3
13. The lamp becomes extremely hot during the operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement. Do not operate lamps beyond the rated lamp life. Excessive
operation of lamps beyond the rated life could cause them to explode on rare
occasions.
14. Never replace lamp assembly or any electronic components unless the projector
is unplugged.
15. Always open the lens shutter or remove the lens cap when the projector lamp
is on.
16. In some countries, the line voltage is NOT stable. This projector is designed to
operate safely within a bandwidth of 110 to 230 volts, but could fail if power
cuts or surges of +/-10 volts occur. In these high-risk areas, it is recommended
to install a power stabilizer unit.
17. Do not point the laser pointer directly to the people’s eyes (especially small children).
There is a danger of injury to the eyes. So keep the Remote Control out of the
reach of children.

4DLP
Cautions
The projector is equipped with ventilation holes (intake) and ventilation holes
(exhaust). Do not block or place anything near these slots, or internal heat
build-up may occur, causing picture degradation or damage to the projector.
When you replace the projector lamp, never touch the new bulb with your bare
hands. The invisible residue left by the oil on your hands may be shorten the
bulb life. Use lint-free gloves or finger cots are recommended.
Preventing Internal Heat Build-Up
After you turn off the power with the Power button, do not disconnect the unit from
the wall outlet while the cooling fan is still running.
Repacking
Save the original shipping carton and packing material; they will come in handy if
you ever to ship your unit. For maximum protection, repack your unit as it was originally
packed at the factory.

Projector 5
TABLE OF CONTENTS
Projector Features and Controls ................................................ 7
Projector............................................................................................................7
External Control Panel ..............................................................................8
Remote Control .................................................................................................9
Button Function.........................................................................................9
Getting the Most Out of Your Projector .................................. 11
Remote Control ...............................................................................................11
External Control Panel ....................................................................................11
Setup ............................................................................................ 12
Unpacking the Projector .................................................................................12
Installation.......................................................................................................13
Connecting to a Computer .....................................................................15
Connecting to a Video Source................................................................16
Operation ........................................................................................................18
Turning the Audio/Visual (A/V) Equipments On and Off .........................18
Turning the Projector On....................................................................18
Turning the Projector Off....................................................................19
Focusing and Sizing the Projected Image..............................................19
Operational Indicator (LED)....................................................................20
Menu System ............................................................................... 22
Accessing the Main Menu ..............................................................................23
Changing a Menu Setting ...............................................................................24
Menu Options - Detailed Description .............................................................24
Picture.............................................................................................................25
Color Adjust ....................................................................................................29
PIP...................................................................................................................30
Source.............................................................................................................33

6DLP
Audio...............................................................................................................35
Keystone .........................................................................................................36
System ............................................................................................................37
Main System ...........................................................................................38
OSD Properties.......................................................................................39
Notes on Factory Default Sub-Menu ......................................................40
Notes on Lamp Reset Sub-Menu ...........................................................40
Language........................................................................................................41
Maintenance ............................................................................... 42
Cleaning the Lens...........................................................................................42
Cleaning the Projector Case...........................................................................42
Lamp Replacement ........................................................................................43
Product’s Specifications ............................................................ 44
APPENDIX A .................................................................................. 45
Preset Timings ................................................................................................45
HDTV Preset Timings......................................................................................47

Projector 7
1
2
3
9
10
12
14
16
20 18 13
15
17
19
21
4
5
6
7
8
11
Projector Features and Controls
Projector
1. Zoom Ring
2. External Control Panel
including the Power
Button (see next page)
3. Ventilation Grill
4. Focus Ring
5. Projection Lens
6. Adjustment Feet
7. Speaker
8. Front IR Remote Sensor
9. AC IN Socket
10. Power Switch
11. Audio OUT Connector
12. Audio IN Connector
13. PC-IN Connector
14. DVI-I IN Connector
15. MONITOR-OUTConnector
16. VIDEO Input Connector
17. S-VIDEO Input Connector
18. USB Input Connector
19. CONTROL Port
20. Rear IR Remote Control
Sensor
21. Kensington Lock

8DLP
External Control Panel
LED Indicator Indicates the state of the projector.
Control Panel Button
Turns the projector (or lamp) ON or OFF.
MENU Displays (or hides) the on-screen control menus.
AUTO Automatically adjusts frequency and phase.
SOURCE Manually selects an input source.
Cursor Controller It can be used as a navigation controller to navigate
(/ / / )the projector menus.
Scrolls up through the menu choices.
Scrolls down through the menu choices.
Increases the value setting on the selected sub-menus,
or confirms a menu selection.
Decreases the value setting on the selected sub-menus.
Note:
The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals
from the remote control. For best results, be sure to aim the control toward the sensor
without any obstructions between the two, and at an operative distance.

Projector 9
Remote Control
Button Function
POWER Turns the projector and lamp ON or OFF.
SOURCE Manually selects an input source.
BY-PASS Selects the Computer or other Video modes throughout to Monitor
(during Lamp OFF).
MENU Displays (or hides) the on-screen
control menus.
Scrolls up through the menu
choices.
Scrolls down through the menu
choices.
Decreases the value setting on
the selected sub-menus.
Increases the value setting on the
selected sub-menus, or confirms a
menu selection.
Simulates the right mouse button
(only functions when your projector
is equipped with an optional
mouse link cable).
Simulates the left mouse button
(only functions when your projector
is equipped with an optional
mouse link cable).
LASER Fires laser pointer (press and
hold).