Vivitar GET LOUD VZ60022BT User manual

VZ60022BT
USER’S MANUAL
GET LOUD
BLUETOOTH
TECHNOLOGY
RECHARGEABLE
BATTERY
BLUETOOTH
SPEAKER

Introduction
Thank you for purchasing the Vivitar VZ60022BT Bluetooth Speaker. You can use your speaker with
iPads, iPhones, iPods and many other types of smartphones and Bluetooth devices to stream music
and enjoy hands-free calling. Please read this manual carefully FIRST in order to get the most out of
your speaker.

Important Safety Precautions
When using your speaker basic safety precautions should always be followed, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER.
2. Never expose your speaker to water, excessive moisture, high temperatures, or extreme cold,
3. In order to avoid the risk of electric shock, never attempt to open your speaker or repair them
without the assistance of certified professionals.
4. Your speaker is not to be used by children or the infirm without suitable adult supervision.
5. Always press all buttons carefully. Do not manhandle your speaker.
6. Do not use your speaker at temperatures under 32°F (0°C) or over 104°F (40°C).
7. Do not drop your speaker, throw it, or subject it to strong impacts or physical trauma.
8. If you detect any abnormalities when using your speaker, contact the manufacturer for support. In
addition do not continue to use your speaker if you detect any leakage, smoke or fire.
9. If fluid from inside the battery gets in your eyes, do not rub your eyes. Wash your eyes with clean
water and immediately contact a physician.
10. When charging, do not place your speaker on flammable materials such as rugs, carpets or
bedding.
11. Your speaker is not intended for commercial use.
12. Use only the supplied chargers and cables. Unplug when not in use for long periods of time or
during lightning storms.
Risk of Fire and Burns.
Do Not Open, Crush, Heat Above 104°F (40°C) or Incinerate.
Always Follow All Manufacturer’s Instructions When Using.
CAUTION

Package Contents
1. Vivitar VZ60022BT Bluetooth Speaker
2. USB Charging Cable
3. Owner’s Manual with Warranty Information

Technical Specifications
• Bluetooth Specification: V3.0+EDR
• Operation Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operation Range: Up to 33 feet (10 meters)
• Talk Time: 6 hours
• Play Time: 6 hours
• Standby Time: 10 hours
• Battery Type: 400mAh, 3.7V, Polymer Lithium Ion Battery
• Charge Time: 2 Hours

A Quick Look at Your Device
①LED Indicator Light
②Microphone
③Power / Play / Pause / Answer
④Auxiliary Port
⑤Charging Port
③
④
⑤
①
②

Charging Your Speaker’s Internal Battery
Your speaker has a built-in, rechargeable lithium-polymer battery. To avoid damage, do not attempt to
remove the battery. The full performance of the battery is only achieved after two or three
charging-discharging cycles. Charge the battery fully before first use. In order to charge the speaker’s
battery, follow the steps below:
1. Connect one end of the included USB charging cable to the charging port on your speaker. Then
plug the other end of the USB charging cable into a USB port on your computer or a suitable power
adapter in order to recharge your speaker’s internal rechargeable battery.
NOTE: The internal battery of your speaker takes approximately two hours to charge when
completely drained.
2. When the battery is charging, the LED indicator light will turn red. The LED indicator light will turn
off when your unit is fully charged.
NOTE: Overcharging could reduce the life of the battery. A charged battery will lose its capacity if it
is not used on a regular basis.
Important!
Ensure that the battery is fully charged if the speaker is not used for a long period of time. To avoid a
complete discharge of the battery, charge the speaker at least every six months.
Battery Notes
•A fully charged battery provides up to six hours of talk-time, six hours of music playback, and up to
ten hours of standby time. Talk and standby times vary depending on the device used and its
various settings.
•When the battery power is low, the speaker will beep every 30 seconds.

Pairing Your Speaker with a Bluetooth Device
Your speaker can be paired with most Bluetooth devices including iPads, iPhones, iPod Touches, and
most smartphones, laptops and tablets. In order to pair your speaker with a phone, follow the steps
below:
1. Press and hold the "POWER" button for three seconds to turn on your speaker. The LED indicator
light will start alternately flash red and then blue repeatedly. This indicates that your speaker is in
pairing mode.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select your speaker (most frequently listed as "Viv Speaker") to start
connecting.
4. Enter "0000" if your device asks for the PIN code.
5. Once paired, the LED indicator light will blink blue once every five seconds.
Note: If pairing is not completed within ten minutes, the speaker will turn off. If this happens, please
repeat the pairing steps above.

Using Your Speaker
Powering Your Speaker On and OFF
1. Press and hold the "POWER" button for 3 seconds to power on your speaker. If you have already
paired your speaker to your Bluetooth device, it will automatically remain paired each time you
power on your speaker.
2. Press and hold the "POWER" button for 5 seconds to turn power off your speaker.
Note: Your speaker will automatically power off when left idle for approximately ten minutes.
Listening to Music
•Play/Pause Button: Press to play or pause a track.
Note: You can adjust volume and playback settings
on your phone or connected audio device.
Play/Pause

Using the Phone Function
•Last Number Re-dial: In standby mode, press the ANSWER button
twice to redial the last number called.
•Answering a Call: Quickly press the ANSWER button to answer an
incoming call.
•Reject an Incoming Call: Press and hold the ANSWER button for
two seconds to reject an incoming call.
•Ending a Call: Quickly press the ANSWER button to end a call.
Answer