Vivitar VZ60023BT User manual

Front Back
① ② ③④⑤ ⑥
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV
interference, caused by unauthorized modificaons to this equipment. Such
modificaons could void the user's authority to operate the equipment.
Locaon of Controls
①Microphone
②Indicator LED
③ Previous Track / Volume –
④ Power / Play / Pause / Answer
⑤ Next Track / Volume +
⑥Charging Port
First Time Use
Charging the Baery
The VZ60023BT Speaker has a built-in, rechargeable lithium-polymer baery. To avoid damage,
do not aempt to remove the baery. The full performance of the baery is achieved aer two
or three charging-discharging cycles. Charge the baery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall, computer, car charger).
3. When the charger is connected to the speaker, the red indicator light will turn on.
Note: Charging the baery fully may take up to 2 hours.
4. When the baery is fully charged, the red indicator light will turn off. Disconnect the charger
from the speaker and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the baery. A charged baery will lose its capacity
if it is not used on a regular basis.
Important!
Ensure that the baery is fully charged if the speaker is not used for a long period of me. To
avoid a complete discharge of the baery, charge the speaker at least every six(6) months.
Baery Notes
• A fully charged baery provides up to six(6) hours of talk-me, four(4) hours music playback,
and up to ten(10) hours of standby me. Talk and standby mes vary depending on mobile
phones or other compable Bluetooth® devices, sengs, styles, etc.
• When the baery power is low, the speaker will beep every 30 seconds.
• When using with your iPhone, an addional baery meter feature will display the remaining
baery on your phone’s touch screen.
Thank you for purchasing the Vivitar® VZ60023BT Bluetooth® Speaker.
Introducon
With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth®
technology. Easily connect to any mobile device for both conversaon and music listening. It
also pairs with other Bluetooth-enabled devices (Bluetooth V3.0+EDR specificaon and HSP,
HFP, A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V3.0+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet(10 meters)
• Rated Input: 5V 500mA
• Baery Type: 1000mAh, 3.7V, Polymer Lithium Ion Baery
In the Box
• VZ60023BT Bluetooth® Speaker
• USB Charging Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all instrucons.
• To avoid damage or malfuncon of the speaker do not drop it from high locaons and/or on
to hard surfaces, do not place heavy objects on it.
• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate
as this may cause an electrical shock, explosion and damage to the device or to the user.
• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves
or any other apparatus that produces heat. This may cause an explosion, degrade the
performance and/or reduce baery life.
• Do not modify, repair or disassemble device (especially the baery). Doing so will void the
warranty. The baery in this device may present a risk of fire or chemical burns if misused or
tampered with.
• Use only supplied and manufacturer-approved chargers and unplug this device when not in
use for long periods of me or during lightning storms.
FCC Statement
This device complies with part 15 of the FCC rules, operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
Vivitar® VZ60023BT Bluetooth® Speaker
User Guide

Warranty Informaon
This warranty is non-transferable and is limited only to the original purchaser. The condions of this
warranty and supplier's responsibilies under this warranty are as follows:
• You must be able to prove the date of original purchase of the unit with a dated receipt.
• The warranty is not applicable if the product has been subject to physical abuse, improper
installaon, modificaon or repair by an unauthorized third party.
• Supplier's responsibility shall be limited to the repair or replacement of the product at its sole
discreon.
• Specifically exempt from any warranty are limited-life consumable components subject to normal
wear and tear such as baeries, decorates and other accessories.
• Supplier is not responsible, for failure resulng from accident, abuse, misuse, or any unauthorized
repair, or modificaon.
• Modificaon and repair of the unit should be done by an authorized and qualified service center
or returned to the manufacturer.
• This warranty gives you specific legal rights, and you may also have other rights, which vary under
local laws.
What is Covered
This warranty covers for the original consumer purchaser only and is not transferable. Products that
fail to funcon properly UNDER NORMAL USAGE, due to defects in material or workmanship will be
repaired at no charge for parts or labor for a period of one year from the me of purchase.
What is NOT Covered
Damages or malfuncons not resulng from defects in material or workmanship and damages or
malfuncons from other than normal use, including but limited to, repair by unauthorized pares,
tampering, modificaon or accidents.
Service and Returns
When returning a defecve product (postage pre-paid) for service, the package should include:
1. Copy of original bill of sale.
2. A detailed wrien descripon of the problem.
3. Your return address and telephone number (Dayme).
Where to send defecve products
United States United Kingdom / Europe Australia
Sakar Internaonal Sakar Internaonal Return faulty device to the
Aenon: Service Department Aenon: Service Department Refund Counter at the store
195 Carter Drive 2D, Siskin Parkway East where the product was
Edison, NJ 08817 4020 Middlemarch Business Park purchased.
Coventry, CV3 4SU
Technical Support
For technical support issues, visit our website at www.vivitar.com. Manuals, soware and FAQ's are
available on line. If you can’t find what you are looking for, e-mail us at [e-mail] where
one of our technical support team members will help you. US phone: [phone]; UK phone:
0800 917 4831; Australia phone: [phone]. Telephone numbers from other countries can be
found at: www.vivitar.com.
Previous Track / Volume –
Microphone
Power / Play / Pause /
Answer / Switch LED Mode
Power / Play / Pause /
Answer / Switch LED Mode
Next Track / Volume +
Next Track / Volume +
Pairing with your Phone
1. Place the speaker in close range of a Bluetooth®-enabled mobile phone.
2. Press and hold POWER buon for three(3) seconds. Unl indicator lights flash blue and red.
3. Set your mobile phone to pairing mode (as explained in operang instrucons for your
phone) and search for Bluetooth® devices.
4. Select "Acrylic speaker" from the list shown on your phone.
5. If requested, enter the PIN code "0000" and confirm the entry. Once the pairing is successful,
the VZ60023BT connects to your phone automacally before switching to standby mode. The
indicator will blink blue once every four(4) seconds.
Note: If pairing is not completed within ten(10) minutes, the speaker will turn off. If this
happens, repeat the pairing steps above.
General Operaon
Turning ON/OFF
1. Press and hold the POWER buon for three(3) seconds to turn the speaker ON. If pairing was
successful (instrucons above), the speaker will remain paired to your mobile device.
2. Press and hold the POWER buon for five(5) seconds to turn the speaker OFF.
Note: The speaker will turn OFF automacally when not connected to a mobile device for
approximately ten(10) minutes.
Music Playback
• Play/Pause buon: Press to play or pause music
playback. Double press to switch the LED mode
when playing music.
• Next Track / Volume + buon: Press to increase
sound level. Press and hold to skip to the next
track.
• Previous Track / Volume - buon: Press to decrease the
sound level. Press and hold to return to the previous
track.
Using the Phone Funcon
In standby mode, press the ANSWER buon twice to re-dial the last number called.
• Answering a Call: Short press the ANSWER buon to answer an incoming call.
• Reject an Incoming Call: Press and hold the ANSWER buon for two(2) seconds to reject an
incoming call.
• Transferring a Call: Press and hold Next Track / Volume + buon for two(2) seconds to
transfer a call from the phone to speaker.
• Ending a Call: Short Press the ANSWER buon to end a call.