Vivitar Infinite BS-C26 User manual

Vivitar® Infinite BS-C26 Bluetooth® Speaker
User Guide
Thank you for purchasing the Vivitar® Infinite BS-C26 Bluetooth® Speaker.
Introducon
With this speaker, you will enjoy listening to high quality music wirelessly using Bluetooth®
technology. Easily connect to any mobile device for both conversaon and music listening. It
also pairs with other Bluetooth-enabled devices (Bluetooth V2.1+EDR specificaon and HSP,
HFP, A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V2.1+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet (10 meters)
• Talk Time: 4 hours
• Play Time: 2 hours
• Standby Time: 15 hours
• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion Baery
• Charge Time: 3 Hours
In the Box
• BS-C26 Bluetooth® Speaker
• USB Charging Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all instrucons.
• To avoid damage or malfuncon of the speaker do not drop it from high locaons and/or on
to hard surfaces, do not place heavy objects on it.
• Keep speaker away from humidity, water and other liquids. If it does get wet, do not operate
as this may cause an electrical shock, explosion and damage to the device or to the user.
• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves
or any other apparatus that produces heat. This may cause an explosion, degrade the
performance and/or reduce baery life.
• Do not modify, repair or disassemble device (especially the baery). Doing so will void the
warranty. The baery in this device may present a risk of fire or chemical burns if misused or
tampered with.
• Use only supplied and manufacturer-approved chargers and unplug this device when not in
use for long periods of me or during lightning storms.

FCC and IC Statement
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV
interference, caused by unauthorized modificaons to this equipment. Such modificaons
could void the user's authority to operate the equipment.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV
interference, caused by unauthorized modificaons to this equipment. Such modificaons
could void the user's authority to operate the equipment. This product is CE cerfied
according to the provision of the R&TTE Direcve (99/5/EC). This declares that this product
is in compliance with the essenal requirements and other relevant provisions of Direcve
1999/5/EC. Please note that this product uses radio frequency bands not harmonized within
EU. Within the EU this product is intended for use in Austria, Belgium, Denmark, Finland,
France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain,
Sweden, and United Kingdom and within EFTA in Iceland, Norway and Switzerland.
Locaon of Controls (Drawing FPO)
① Charging Port
②Microphone
③Play / Pause / Answer
④Auxiliary Port
⑤Indicator LED
⑥ON/OFF
Baery Informaon
The device is equipped with an integrated lithium-polymer
baery. The baery cannot be replaced. Do not aempt to
remove the baery from the device since it would damage
the device. The full performance of a new baery is not
achieved unl aer two or three complete charging-discharging cycles. The baery can be charged
and discharged several hundred mes, but it loses its capacity over me.
Top
①③④⑥
② ⑤

Disconnect the BS-C26 from the power supply as soon as the baery is fully charged,
overcharging would reduce the service life of the baery. A charged baery will lose its
capacity if it is not used on a regular basis.
Important: Ensure that the baery is fully charged if you do not use the device for a long
period of me. To avoid a complete discharge of the baery, the BS-C26 should be
charged at least once every 6 months.
Charging Your Speaker
The BS-C26 speaker is powered by an internal rechargeable baery. Charge the baery
completely before its first use. Read the secon tled "Baery informaon" in this manual
before starng the charging process.
1. Connect one end of the included USB Charging Cable to your speaker's charging port.
2. Connect the other end of the USB Charging Cable to a USB port.
3. When your speaker is charging, the red LED indicator light will turn red. The baery will take
approximately three hours to fully charge
4. When the baery is fully charged, the LED indicator light will turn off. Disconnect the
charging cable from your speaker and the outlet. Your speaker is ready to use.
NOTES:
- Give your speaker a full charge before using for the first me.
- When the baery power is low, the indicator light will turn red and start to flash.
Turning ON Your Speaker
Before you can start using your speaker, you must
first charge the rechargeable baery. Once charged,
slide the ON/OFF switch to the ON posion to
power on your speaker.
If your speaker completed the pairing process
successfully, when the speaker is turned on, it will
connect to the phone you last connected to
automacally. Please ensure your phone's Bluetooth® funcon is acve.
Turning OFF Your Speaker
Slide the ON/OFF Switch to the OFF posion to power down your device.
Note: To conserve power, if your speaker is not
connected to a device for approximately
about 10 minutes, it will turn off
automacally. You should toggle the power
switch again to turn on the speaker.
Pairing Your Speaker to a Bluetooth Phone
Before you use your speaker the first me, you must pair it with a Bluetooth® enabled mobile
phone. Pairing is a one me process and required only for the first connecon with the
Bluetooth® enabled mobile phone.
1. Keep the BS-C26 within one meter range of a Bluetooth® enabled mobile phone.
2. Slide the ON/OFF Switch to the ON posion. The LED indicator light on your speaker will
⑥ ON/OFF
Top
⑥ ON/OFF
Top

illuminate, flashing red and blue alternately. The device is now in pairing mode.
3. Find the Bluetooth® seng of your mobile phone and start the search for Bluetooth®
devices. (For further details, please read the operang instrucons of your mobile phone).
4. From the list of devices found, select your speaker "Vivitar SP".
5. If required, enter the PIN code "0000" and confirm the entry. Once the pairing process was
successful, the BS-C26 will connect to your mobile phone automacally then switch to
standby mode.
Note: -If pairing is not completed within 10 minutes, the speaker will turn off. If this happens,
please repeat the pairing steps.
Listening to Music on Your Speaker
Play/Pause
Press the Play/Pause buon to get music from your
audio source to play or pause.
External Audio Input
The BS-C26 has an AUX-IN port which can be used to
connect an addional audio source using the 3.5mm
Auxiliary Cable. When an audio source is plugged in
using the 3.5mm Auxiliary Cable, any music playing on your speaker will pause and music
playing from the plugged in audio source will play instead.
Note: The BS-C26 supports the A2DP profile which allows stereo music to stream from a
Bluetooth phone. The music will pause automacally if a call is incoming, and resume
when the call has ended.
Using Your Speaker during a Phone Call
Last number re-dialing
Double press the Answer buon, the last number you
dialed will be redialed.
Answering a call
Press the Answer buon to answer an incoming call.
Ending a call
Press the Answer buon to end a call.
Warranty Informaon
This warranty is non-transferable and is limited only to the original purchaser. The condions of
this warranty and supplier's responsibilies under this warranty are as follows:
• You must be able to prove the date of original purchase of the unit with a dated receipt.
• The warranty is not applicable if the product has been subject to physical abuse, improper
installaon, modificaon or repair by an unauthorized third party.
• Supplier's responsibility shall be limited to the repair or replacement of the product at its sole
discreon.
③ Play/Pause
Top
③ Answer
② Microphone
Top

• Specifically exempt from any warranty are limited-life consumable components subject to
normal wear and tear such as baeries, decorates and other accessories.
• Supplier is not responsible, for failure resulng from accident, abuse, misuse, or any
unauthorized repair, or modificaon.
• Modificaon and repair of the unit should be done by an authorized and qualified service center
or returned to the manufacturer.
• This warranty gives you specific legal rights, and you may also have other rights, which vary
under local laws.
What is Covered
This warranty covers for the original consumer purchaser only and is not transferable. Products
that fail to funcon properly UNDER NORMAL USAGE, due to defects in material or workmanship
will be repaired at no charge for parts or labor for a period of one year from the me of purchase.
What is NOT Covered
Damages or malfuncons not resulng from defects in material or workmanship and damages or
malfuncons from other than normal use, including but limited to, repair by unauthorized pares,
tampering, modificaon or accidents.
Service and Returns
When returning a defecve product (postage pre-paid) for service, the package should include:
1. Copy of original bill of sale.
2. A detailed wrien descripon of the problem.
3. Your return address and telephone number (Dayme).
Where to send defecve products
United States United Kingdom / Europe Australia
Sakar Internaonal Sakar Internaonal Return faulty device to the
Aenon: Service Department Aenon: Service Department Refund Counter at the store
195 Carter Drive 2D, Siskin Parkway East where the product was
Edison, NJ 08817 4020 Middlemarch Business Park purchased.
Coventry, CV3 4PE
Technical Support
For technical support issues, visit our website at www.vivitar.com. Manuals, soware and FAQ’s
are available on line. If you can’t find what you are looking for, e-mail us at [e-mail]
where one of our technical support team members will help you. US phone: [phone]; UK
phone: [phone]; Australia phone: [phone]. Telephone numbers from other countries
can be found at:
www.vivitar.com.