VIVO HOME Vanity Set With 10 LED Bulbs User manual

Assembly Instruction
Vanity Set With 10 LED Bulbs
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Parts List and Diagram
-2-
1 pc
A
4 pcs
B
2 pcs
C
2 pcs
D
1 pc
E
4 pcs
G
1 pc
F
1 pc
H
1 pc
I

Place Cushion Fupside down on a at surface (carpeting is recommended)
and install Part G(4 pcs) on Cushion Fone by one.
Parts List and Diagram
2 pcs
3
6 pcs
2
16 pcs
1
22 pcs
4
1 pc
5
G
F
-3-
Assemble Steps
Step 1
1 pc
5
8 pcs
4
8 pcs
1

Place Table Aupside down on a at surface. Install Part B(4 pcs) on Table A
and install 3 knobs on its drawers one by one.
A
B
Assemble Steps
Step 2
-4-
1 pc
5
8 pcs
4
8 pcs
1

Connect Part C(2 pcs) with Part D(2 pcs). Fix them on the back of the table
and tighten the screws.
Install Mirror Ebetween Part C(2 pcs).
C
D
D
E
Assemble Steps
Step 3
Step 4
-5-
2 pcs
4
1 pc
5
6 pcs
2
6 pcs
4

1 pc
E
1 pc
H
1 pc
I
+
Connect Part Hwith Part I. Connect Part Iwith Part Efrom the back connector.
Assemble Steps
Step 5
H
E
I
-6-

1. After the wiring is connected, insert the plug into a socket containing the grounding wire.
2. Click the power button to turn on or turn o all the 10 light bulbs on the vanity mirror.
3. Long press the power button to make the bulb go brighter or dimmer when the lights are on.
The brightness setting of the light will be automatically saved.
4. If you need to re-adjust the brightness of the light later, please repeat steps 1-2.
Assemble Steps
-7-
Operating instructions for the lights

To continuously improve its products, VIVOHOME reserves the right to modify this
information without prior notication.
For any questions during assembly, please watch the video in the product page for
reference. Or contact our customer service with any questions, comments, or concerns.
Thank you for using VIVOHOME products in your home!