VIVO HOME VH1049 User manual

Assembly Instructions
V-1
LIGHTED VANITY SET
WITH GOLDEN LEGS

•
•
•
•
•
•
•
•
•
For safety and stability, we suggest you have to secure the anti-tip accessories
to the wall to prevent tipping, injury, and property damage.
The product must be assembled and used in accordance with the provisions of the
manual.
Avoid long-term exposure to humid environments to prevent mildew.
Keep the product away from re sources and high temperatures. Do not expose the
product to direct sunlight.
Do not place any hot objects directly on the surface of the product.
If there are any defective or missing parts after unpacking, please cease assembly
immediately and contact us.
Please assemble the item on a spacious surface; to aviod product damage, do not
place the unwrapped product directly on the ground.
Please do not stand or sit on the wooden boards.
Please keep the product away from sharp, pointed objects and corrosive substances
to prevent product damage.
If you nd that the table legs are loose during use, please tighten the screws as soon
as possible to prevent the issue from persisting.
•
•
Children are not allowed to assemble the product. During assembly, keep all small
parts out of the reach of children, as it may be fatal to swallow or inhale them.
Children are forbidden to climb or play on the product. Climbing or playing on the
product may result in serious bodily injuries.
-1-
Note
Warning
Attention

C2
C1
-2-
Parts List and Diagram
X37
X2
X11
X6
X3
Item no. Reference Image Qty.
X26
X22
X10
X1
X6
Item no. Reference Image Qty.
M3.5x35 mm.
M3x12 mm.
M3.5x14 mm.
8x40 .
350mm
A B
C D
E F
G H
I J
M3.5x12 mm.
M4x16 mm.

-3-
Parts List and Diagram
M
X13
X1
Item no. Reference Image
OX4
X10
M6x35 mm.
SX20
Qty.
N
K L X10
X6
Item no. Reference Image
P
Q R
X6
X2
M6x40 mm.
TX2
Qty.

8x40 mm.
M4x50 mm.
*Package includes some extra screws
-4-
Parts List and Diagram
VX2
Item no. Reference Image Qty.
UX2
Item no. Reference Image Qty.
Use The Cam Lock and Quickt
Quickt: Tighten the quickt until it is ush against the panel. Do not under- or
over-tighten it.
The cam lock should be inserted before the quickt. Turn the cam lock clockwise
to tighten. The head of the quickt should be inserted in the center of the cam
lock where the two panels are joined.

-5-
Cabinet Door Installation
1: If the position needs to be vertically adjusted, loosen the screws shown in the
picture. Then, adjust the position of the cabinet door. When the position is correct,
tighten the screws again.
2: If the position needs to be diagonally adjusted, loosen the screws shown in the
picture. Then, adjust the position of the cabinet door. When the position is correct,
tighten the screws again.
3: If the position needs to be horizontally adjusted, loosen the screws shown in the
picture. Then, adjust the position of the cabinet door. When the position is correct,
tighten the screws again.
If the closing position of the cabinet door deviates after installing the cabinet
door hinge, please adjust it in the following ways:

-6-
29
28
27
28
27
30
24
21
20 22
19
16
17
13
6
8
7
7
4
1
5
3
10
12
25
26
31
32
33
14
15 18
23
Parts List and Diagram
9
2
3
11

-7-
1
3
13
3
4
5
3
A
A
B
Assembly Steps
STEP 1 13A
x 1 pc. x 2 pcs. x 4 pcs. Bx 4 pcs.
STEP 2 45A
x 1 pc. x 1 pc. x 2 pcs.
Use Accessories A and B to connect Board 1 with Boards 3 according to the posi-
tion shown in the gure.
Use Accessories A to connect Board 5 with Board 4 and Board 1. Please turn the
whole structure as the arrow shows to avoid board breakage during assembly.
90°

-8-
1
4
5
3
3
6
6
7
7
7
7
A
A
B
B
Assembly Steps
STEP 3 67B
x 1 pc. x 2 pcs. x 3 pcs.
Ax 3 pcs.
Use Accessories A and B to x Boards 7 onto Board 6.
Then use Accessories A and B to x Board 6 onto Board 4.

-9-
Assembly Steps
STEP 4 8E
x 1 pc. x 3 pcs.
Ax 12 pcs. Bx 5 pcs.
1
4
5
3
3
7
7
6
8
B
E
A
Use Accessories A, B, and E to x the assembled part of Step 3 onto Board 8.

10
9
2
A
B
-10-
Assembly Steps
STEP 5 2910
A
x 1 pc. x 1 pc. x 1 pc. 11 x 1 pc.
x 4 pcs. Bx 4 pcs.
11
Use Accessories A and B to x Board 9 and Board 10 onto Board 2. Insert Board 11
into the position shown in the gure.

STEP 6 12 D
x 1 pc. x 2 pcs. Mx 1 pc.
Ax 4 pcs. Bx 4 pcs.
Use Accessories A and B to x Board 12 onto Board 9 and Board 10.
Use Screws D to x Accessory M onto Board 9 according to the position shown in
the gure.
Assembly Steps
2
9
11
10
12
M
D
A
B
-11-

22
99
10 10
12 12
N
K
K
L
-12-
Assembly Steps
STEP 7 25 31 32
N
x 1 pc. 26 x 1 pc. x 1 pc. x 1 pc. 33 x 1 pc.
x 6 pcs.
Kx 9 pcs. Lx 4 pcs.
25 31
26
33
32
32
32
31
31
25
25
1
23
Fix Accessories N onto Part 25, Part 31, and Part 32.
Use Screws K to x Part 25 onto Board 2. Use Screws K to x Part 31 and Part 32 onto
Board 12.
Use Part 26 to connect Part 25 with Part 31. Use Part 33 to connect Part 32 with Part 31.
Use Screws L to x them according to the position shown in the gure.
1
2
3

1
4
5
2
9
10
12
3
3
7
7
6
8
A
B
Assembly Steps
STEP 8 Ax 8 pcs. Bx 6 pcs.
-13-
26 32
31
25
Use Accessories A and B to connect the assembled part of Step 4 with the assem-
bled part of Step 7.

Rx 2 pcs.
STEP 9 13 F
x 1 pc. x 4 pcs. Ix 1 pc. Jx 2 pcs.
Use Accessories R to x Screws F onto Board 13. Use Accessories I to x Screws J onto
Board 13.
13
F
R
RI
J
Assembly Steps
-14-

2
1
913
32
10
31
25
26
5
7
7
86
4
Assembly Steps
STEP 10 C1
C1
C1
x 2 pcs.
C1
D
D
D
D
x 16 pcs.
Use Screws D to x Accessories C1 onto the positions shown in the gure.
Then use Screws D to connect the assembled part of Step 9 with Board 10.
-15-

22 22
22
23
23
24
24
21 21
21
20 20
20
F
F
J
Q
I
Q
E
-16-
Assembly Steps
STEP 11
20
F
x 1 pc. 21 x 1 pc. 22 x 1 pc. 23 x 1 pc. 24 x 1 pc.
x 4 pcs.
Ex 4 pcs.
Ix 1 pc.
Jx 2 pcs. Qx 4 pcs. C2
C2
x 1 pc.
1 2
3
Use Screws E to connect Board 20 with Board 21 and Board 22 according to the
position shown in the gure.
Insert Bottom Plate 23 into the slot as shown in the gure. Use Accessories Q to
connect Board 24 with Board 21 and Board 22.
Use Screws F to x Accessories C2 respectively onto Board 21 and Board 22 accord-
ing to the position shown in the gure. Use Screws J to x Handle I onto Board 24.
1
2
3

14 14
14 14
15 15
15 15
16 16
16 16
17
19
18
17
19
E
F
C2
F
I
J
Q
Q
Q
C2 x 1 pc.
STEP 12
14
E
x 1 pc.
19 x 1 pc.
15 x 1 pc. 16 x 1 pc. 17 x 1 pc. 18 x 1 pc.
x 4 pcs. Fx 4 pcs. Ix 1 pc. Jx 2 pcs.
Qx 6 pcs.
Assembly Steps
-17-
12
34
18
Use Screws E to connect Board 14 with Board 15 and Board 16 according to the
position shown in the gure.
Use Accessories Q to x Board 18 onto Board 14.
Insert Bottom Plate 17 into the slot as shown in the gure. Use Accessories Q to
connect Board 15, Board 16, and Board 18 with Board 19.
Use Screws F to x Accessories C2 respectively onto Board 15 and Board 16 according
to the position shown in the gure. Use Screws J to x Handle I onto Board 19.
1
2
3
4

27
27
28
28
27
29
30
28
28
27
L
K
O
Assembly Steps
STEP 13 27
L
x 2 pcs. 28 x 2 pcs. 29 x 1 pc. 30 x 1 pc.
x 6 pcs. Kx 4 pcs. Ox 4 pcs.
-18-
Use Parts 28 and Parts 29 to connect the two pieces of Parts 27. Use Screws L to x
them according to the position shown in the gure.
Insert Accessories O into the 4 feet of Parts 27. Use Screws K to x Cushion 30 onto
Parts 27 and Parts 28.

8
8
11
P
H
-19-
L
Pull it outFix the bulb first.
Connect the bulb & wires.
Assembly Steps
STEP 14 Px 6 pcs.
Gx 6 pcs. Hx 1 pc.
G
1
2
3
Use Screws G to x Accessories P onto Board 11.
Fix Light String H onto Board 8 as shown in the gure.