Vivo STAND-PAD1 User manual

iPa Floo Stan
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Moel STAN PA1
Tool Requie
phillips screwdriver
Package Content
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
A (x1)
Anti-Theft Box
B (x1)
Pole
C (x1)
Base
D (x4)
Rubber Pad
E (x1)
Decorative Cover
F (x2)
6.3x
G (x2)
Concrete Anchor
H (x1)
Key
I (x4)
M x6
J (x4)
M8x20
K (x1)
4mm Allen Key
L (x1)
mm Allen Key
M (x1)
Button
- -http//vivo u com/pouct/tan pa1

Aembl# Step
2
Step 1
D
Attach rubber pads (D) to underside of base (C).
Step 2
Slide decorative cover (E) onto pole (B). Then, attach base (C) to pole
(B) using screws (J) and mm allen wrench (L).
B
E
C
J
L
Step 3
For free standing use, simply place
the mount on the floor.
Option B Woo Floo Intallation
F
Option A Floo Stan
Place stand in desired location and lift cover (E). Use pencil to mark
drilling locations. Drill 2.2” ( mm) deep holes using 3/16” (4. mm)
drill bit, then use 6.3x screws (F) to secure base to floor. Replace
cover (E).

3
Step 5
Place 12.9" iPad Pro in anti-theft box (A)
and connect charging cable.
Step 6
Attach anti-theft box cover by hooking latches into slots on the top
of the box.
Step 4
Option C Concete/Bick Intallation
Attach anti-theft box (A) to pole (B) using M x6 screws (I), making
sure the lock is facing down for correct orientation.
I
Step 3 (Continue)
Place stand in desired location and lift cover (E). Use pencil to mark
drilling locations. Drill 2.4” (60mm) deep holes using 3/8” (10mm)
drill bit, press concrete anchors (G) into holes, then use 6.3x
screws (F) to secure base to floor. Replace cover (E).

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safet# Waning
Contact u at
Last updated: 0 /23/18
HOME button
unaccessible.
HOME button
accessible.
M
0°
-7 °
0° 90°
Step 7
H
K
Lock anti-theft box (A) with key (H). Adjust tilt and rotation with 4mm
allen key (K).
Step 8
For accessible Home button, use
rubber button pre-installed in the anti-
theft box cover. For inaccessible Home
button, remove the rubber button and
replace with the plastic button (M).
Please note that the button should be
installed on the inside of the box cover.
4