
3
STEP 2
Slide Corner Bracket (E) into the bottom track of Top Frame Piece (A) and then Corner Bracket with
Holes (D)into the top track, as shown. Insert Side Frame Pieces (C) into Corner Brackets (E), then
secure by installing M6x14mm Set Screws (S-A) into Corner Bracket with Holes (D) and 3mm Allen
Wrench (T-A).
Repeat step for Bottom Frame Piece (B).
NOTE: Once assembled, if you notice gaps on the corners, loosen M6x14mm Set Screws (S-A), adjust frame pieces,
and re-tighten set screws.
Place assembled frame over top edge of TV at 30° angle so the Upper Hooks (G) clip onto the TV. Then
push the bottom of the frame to snap into place.
STEP 3
S-A
S-A
T-A
A
B
G
T-A
S-A
D
E
C