Vivo STAND-TV09 User manual

    
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
Scan the QR code with your mobile device or follow the link to
helpful videos and specifications related to this product.
 
phillips screwdriver
 

Middl Bas
(x1)

Lf L (x1)

Rih L (x1)

Lf Covr (x1)

Rih Covr (x1)

Suppor Pla (x1) Univrsal Pla (x1)
!
Plasi Covr (x2)
"
Adapr Bra 
(x2)
#
Column (x1)
$
Plasi Handl (x1)
%
Top Covr (x1)

Connin Pla (x1)

Camra Shlf (x1)
&
DVD Shlf (x1)

Washr (x4)
'
M6x16 (x8)

M6x2* (x3)

M4x6 (x3)

M4x6 (x4)
(
M6x14 (x2)

M6x8 (x6)
)
M8x2* (x4)
*
M*x8 (x2)
+
Alln K- (x1)
,
Wrnh (x1)
- 
M*x14 (x4)
- 
M6x14 (x4)
- 
M6x3. (x4)
- 
M8x3. (x4)
- 
M8x*. (x4)
- 
Washr (x4)
-
Small Spar
(x8)
- !
Bi Spar (x8)
- --.//00 12/./ 0
1

. 3 24 - 
Insert the base (A) into the left leg (B). Align the mounting
holes and secure with M6x16 bolts (Q). Repeat this step for the
right leg (C). Adjust caster height if needed by loosening the
nut with the wrench (Z).
245 .
. 6 - - 2  - 
2
Loosen screws on each side of column (J) using the Allen key (Y)
to adjust height to desired level, then tighten (CAUTION: Hold
inner column when loosening for adjustment). Attach column to
base (A) using M8x2 bolts (W) and tighten with Allen key. Slide
the handle (K) and the top cover (L) over the pole.
. 7 " - .. 
Attach the support plate
(F) to the column (J) with
M6x14 bolts (U). Tighten
bolts using a screwdriver.
. 8 " . 
Insert the adapter
brackets into the
universal plate (G).
Align the holes in the
adapter brackets (I)
to the holes in the
washers (P). Insert
the four bolts, but do
not tighten them yet.
Insert the washers (P) into the back of universal plate (G) along
the plate rails.
Place left and right covers (D) and
(E) over the base of the stand.

. 8 " . 
Slide the adapter brackets (I) onto the universal plate (G).
Align the holes in the brackets with the washers (P). Insert
four M6x16 bolts (Q), but do not tighten.
Attach the plastic covers (H) to both ends of the universal
plate (G) using M6x8 bolts (V).
. 9 ! - .5  - .. 
Hang the universal plate (G) onto the support plate (F), and
secure with M x8 bolts (X). IMPORTANT: Make sure the display
is mounted correctly and that the bolts are tightened safely
before releasing the display.
  

Note: Choose the
appropriate bolts,
washers and spacers
(if necessary)
according to the
type of screen.
Tighten all bolts but
do not over tighten.
Screw the adapter
brackets onto the
display.
       /
".
3
. 8 " .  :;
Align the adapter
brackets (I) with
the mounting
holes in your
display, then
tighten bolts with
the Allen key (Y).

. < " -  -=
Insert the two plastic holders of the DVD shelf (O) into the slots
of the column, then close the levers to lock the DVD shelf in
place. Tighten M4x6 dome head bolts (T) into the bottom of
the shelf brackets to secure.
4
. > 4 2
Run cables through cable management slots.

. ? " - 2 -=
Attach the camera shelf (N) to the connecting plate (M) using
M4x6 flat head bolts (S).
Tighten M4x6 dome head screws (T)
into back of camera shelf and
connecting plate.
Attach the connecting plate (M) to the column (J) at the
desired height using M6x2 bolts (R). Tighten bolts using a
screwdriver.
.  " -  
*
. 3 .5 &
&.
%. @
To rotate from portrait
to landscape view,
remove the two
screws from the back
of support plate (F).
Turn the display, and
secure with the
previously removed
screws.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
=5 )
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
  
Last Updated: 0 /07/18 6
. 3 .5 & :;
&.
 @
To rotate from landscape to portrait view, remove the two
screws from the back of support plate (F). Turn the display, and
secure with the previously removed screws.