Vivo WLM-GL24D User manual

Whit Board
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Modl WLM GL24D
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
Assmbl Stps
Tools Rquird
phillips screwdriver
Pac ag Contnts
1
Stp 1
A (x1)
Whit Board
B (x4)
Plasti Anhor
C (x4)
Srw
D (x4)
Mtal Covr
F (x4)
Mtal Washr
G (x1)
Markr Tray
H (x2)
Magnt
I (x1)
Markr
- -https//vivo us.com/products/wlm gl24d
E (x1)
Magnti rasr
Stp 2
Draw four points on the wall
through the holes of the
whiteboard (A).
If mounting to wood, Drill 1"
(2 mm) deep holes using a
3/32" (2.4mm) bit. If mounting
to drywall, drill through
drywall using a 3/16" ( mm)
bit.

2
Stp 5 Stp 6
Stp 7 Stp 8
Stp 3 Stp 4
Stp 9
Tap the plastic anchors (B) into
the wall (skip if mounting to
wood).
Align the holes.
Insert the screws (C) in the
metal washers (F).
Mount the four corners to the
wall with screws (C).
Cover the
screws (C)
with the
metal
covers
(D).
Peel off the paper
from the marker
tray (G).
Stick the tray (G) to the back of the
whiteboard (A).
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Saft Warning
Contact us at
Last updated: 06/08/18