Vivosun HR-20 User manual

INSTRUCTION MANUAL
Quality HoseOutlet
AUTO REWIND WATER HOSE REEL
Read the instruction manual carefully before using the tool and
follow all given instructions.Save the instructions for further reference.

AUTO REWIND WATER HOSE REEL
INSTRUCTION MANUAL
2
HANDLING AND OPERATION
1.Fasten metal mounting to the wall or ceiling with screw.
2.Drill 4x M8 holes to match the holes located in the Mounting Bracket.
3.Connect the hose reel to the Mounting Bracket with the Pivot Pin.
4.It is recommended to install the mounting bracket 0.8 metre from the mounting
bracket to floor.

AUTO REWIND WATER HOSE REEL
INSTRUCTION MANUAL
3
PRODUCT DESCRIPTION
Model
HR-20
HR-30
20M
30M
PVC 8Bar/24 Bar -5℃-45℃PP 3/4”
Hose
length
Hose
material
Working/Burst
Pressure Temperature Outer casing
material Size of Inlet
1.Pull the hose , It has 2-3 lock positions every one metre.
The yellow mark
2.please do not pull at the hose when is has reached it's maximum length( the yellow
mark on the hose indicates the end） please see above photo.
3.Please hold the nozzle when the hose is retraction until it is finished.
4:Trouble Shooting:
The most common malfunction is :the hose cannot be retracted automatically after
fully extending the hose.
The reason may be that:The hose end is locked as the stop anywhere mechanism stays
in the locking point,and there’s no extra hose to be pulled out for a release. There are
two ways to solve this:
(1) Hold the hose at the yellow waring mark and pull with a jerking motion until the
hose retracts.
(2) Place the item with its right side down, pull on the hose until it retracts.

AUTO REWIND WATER HOSE REEL