Vivotek IB836BA-HT User manual

User’s Manual
2MP • WDR • Day & Night • 30M IR • IP66 • IK10 • Extreme Weather •
Defog
Bullet
Network Camera
IB836BA-EHT, IB836BA-EHF3
IB836BA-HT, IB836BA-HF3
Rev. 1.2

VIVOTEK
2 - User's Manual
Table of Contents
Overview ..............................................................................................................................................................3
Revision History ...............................................................................................................................................3
Read Before Use..............................................................................................................................................4
Package Contents ............................................................................................................................................4
Symbols and Statements in this Document......................................................................................................5
Physical Description .........................................................................................................................................5
Hardware Installation........................................................................................................................................6
Network Deployment ......................................................................................................................................13
Software Installation .......................................................................................................................................16
Ready to Use..................................................................................................................................................17
Auto Focus .....................................................................................................................................................18
Accessing the Network Camera .................................................................................................................... 19
Using Web Browsers......................................................................................................................................19
Using RTSP Players.......................................................................................................................................22
Using 3GPP-compatible Mobile Devices........................................................................................................23
Using VIVOTEK Recording Software .............................................................................................................24
Main Page......................................................................................................................................................... 25
Client Settings .................................................................................................................................................. 30
Conguration.................................................................................................................................................... 35
System > General settings .............................................................................................................................36
System > Homepage layout ..........................................................................................................................38
System > Logs ...............................................................................................................................................41
System > Parameters ....................................................................................................................................43
System > Maintenance...................................................................................................................................44
Media > Image .............................................................................................................................................48
Media > Video ................................................................................................................................................61
Media > Video ................................................................................................................................................62
Media > Audio.................................................................................................................................................70
Network > General settings............................................................................................................................71
Network > Streaming protocols ....................................................................................................................79
Network > SNMP (Simple Network Management Protocol)...........................................................................88
Security > User accounts ...............................................................................................................................89
Security > HTTPS (Hypertext Transfer Protocol over SSL) .................................................................90
Security > Access List ..................................................................................................................................97
PTZ > PTZ settings ......................................................................................................................................102
Event > Event settings..................................................................................................................................106
Applications > Motion detection....................................................................................................................120
Applications > DI and DO ...........................................................................................................................123
Applications > Tampering detection .............................................................................................................124
Applications > Audio detection ...................................................................................................................125
Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform) .......127
Recording > Recording settings ..................................................................................................................130
Local storage > SD card management.........................................................................................................135
Local storage > Content management .........................................................................................................136

VIVOTEK
User's Manual - 3
Appendix .................................................................................................................................................... 139
URL Commands for the Network Camera................................................................................................ 139
Technology License Notice....................................................................................................................... 333
Electromagnetic Compatibility (EMC)....................................................................................................... 334
Overview
VIVOTEK’s IB836BA-H is a stylish, bullet-style network cameras designed for diverse
outdoor applications and comes with a complete range of options. Equipped with a 2MP
Full HD WDR sensor for a resolution of 1920x1080 at 30 fps, the IB836BA-H series is an
all-in-one outdoor camera capable of capturing high quality and high resolution video even
in high contrast environments.
The IB836BA-H series provides exible options for both xed focus for simple operation,
and remote focus with built-in stepping motors and P-iris to provide precise and remote
adjustments.
Meeting the demands of outdoor and harsh conditions, the IB836BA-H series also comes
with an IP66- and IK10-rated housing that allows the camera body to withstand rain, dust
and against acts of vandalism or other impacts.
The IB836BA-H is designed to operate under a wide operating temperature in extremely
cold or hot temperatures, even when powered by PoE. When choosing VIVOTEK
IB836BA-H series, users have four options: the IB836BA-HT, IB836BA-EHT, IB836BA-
HF3, and IB836BA-EHF3. Different options can be chosen based on the requirements of
your application, such as focusing method or the environment temperature.
Revision History
■ Rev. 1.0: Initial release.
■ Rev. 1.1: Added terminal block pinouts.
■ Rev. 1.2: Added the Mounting hole position drawing.

VIVOTEK
4 - User's Manual
Package Contents
■ IB836BA-HT, IB836BA-EHT, IB836BA-HF3, or IB836BA-EHF3.
■ L-type T8 anti-tamper key wrench, desiccant bag, screws
■ Waterproof Ethernet cable housing
■ Software CD
■ Sun shield
■ Quick Installation Guide & alignment sticker
* T8 key wrench is also used for the hex socket screw on the camera bracket.
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera
is not only a high-performance web-ready camera but can also be part of a exible surveillance
system. It is the user’s responsibility to ensure that the operation of such devices is legal before
installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the Package
Contents listed below. Take note of the warnings in the Quick Installation Guide before the Network
Camera is installed; then carefully read and follow the instructions in the Installation chapter to
avoid damage due to faulty assembly and installation. This also ensures the product is used
properly as intended.
The Network Camera is a network device and its use should be straightforward for those who
have basic networking knowledge. It is designed for various applications including video sharing,
general security/surveillance, etc. The Configuration chapter suggests ways to best utilize the
Network Camera and ensure proper operations. For creative and professional developers, the URL
Commands of the Network Camera section serves as a helpful reference to customizing existing
homepages or integrating with the current web server.
Mounting Hole Positions
AA
AA
BBBB
A_117.4 0
-0.5
B_117.4
0 -0.5
3- 6.5 ± 0.1
5
86 0
-0.4
86
0 -0.4
10.52
10.49
0 -0.15
21
+0.2
0
48.53
0
-0.2
5
SECTION BB-BB Dimensions are measured
in millimeters.

VIVOTEK
User's Manual - 5
Symbols and Statements in this Document
i
INFORMATION: provides important messages or advices that might help prevent
inconvenient or problem situations.
NOTE: Notices provide guidance or advices that are related to the functional integrity of
the machine.
Tips: Tips are useful information that helps enhance or facilitae an installation, function,
or process.
WARNING: or IMPORTANT:: These statements indicate situations that can be
dangerous or hazardous to the machine or you.
Electrical Hazard: This statement appears when high voltage electrical hazards might
occur to an operator.
Physical Description
Front Panel
Motorized or
xed lens
The T models have auto-focus motorized lens. Some of the sufx syntax used in model
naming are listed below:
E w/ heater for extreme weather
Fx Focal length w/ number
T w/ Remote focus lens
R w/ PoE repeater
H w/ High Dynamic Range functionality
NOTE:
Reset Button
SD/SDHC/SDXC
Card Slot
PoE daughterboard

VIVOTEK
6 - User's Manual
Hardware Installation
1.Attach the included alignment sticker to a preferred location.
2. Drill holes for mounting screws and a cabling hole.
3. Loosen the anti-tamper screws to open the top cover.
4. Insert an SD card (user-supplied).
5. Replace the desiccant bag whenever you open the top cover. This ensures the
components are free from the moisture.
M
3
4
icro
5
TM

VIVOTEK
User's Manual - 7
6. Secure the Network Camera to a wall or ceiling.
Wall Mount
Ceiling Mount
6
7
7. Secure the sun shield to camera.

VIVOTEK
8 - User's Manual
3.5 ~ 6mm
8. When connecting the LAN cable, use the cable housing to make sure the connections
are waterproof.
8-1. Pass the cable through the seal dome, and squeeze the rubber seal through an RJ45
connector.
8-2. You can then pass the cable through the cable gland body.
8-3. Fasten up these components. Make sure enough pressure is exerted on the rubber
seal.
8-4. Connect the Ethernet cable to the RJ45 connector with a seal ring. Fasten the cable
housing.
8

VIVOTEK
User's Manual - 9
9
9. If your cables pass through a hole on a wall or ceiling, make sure the passage is
waterproof using sealant foam, heat shrink tubing, or putties. Make sure the interfaces,
e.g., DC connectors and terminal connectors, if unused, are also wrapped up using
waterproof putties.
You can also purchase the AM-714 junction box to place all cabling connections within the
protection of the box .

VIVOTEK
10 - User's Manual
12. Install the "Installation Wizard 2" software utility on your software CD.
13. The program will search for VIVOTEK Video Receivers, Video Servers or Network Cameras
on the same LAN.
14. Double-click on the camera's MAC address to open a browser management session with
the camera.
11. Connect the other interfaces, such as I/O wires.
10. Loosen the fastening ring on the mount bracket using a hex wrench, and aim the camera at
the area of your interest. When done, tighten the fastening ring.
Fastening ring
10
15. With a live view is displayed on your laptop, adjust the zoom and focus to obtain an optimal
image. Check the live view to ensure the image is in focus.
The "T" models comes with motorized focus lens. Use the Auto Focus function in rmware
menu for best image.

VIVOTEK
User's Manual - 11
LED Denitions
Item LED status Description
LED De`nitions
1 Steady Red Powered and system booting, or network
failed
Red LED off Power off
Green LED off Network is disconnected
2 Steady Red and Green LED blinks every 1
sec.
Connected to network
3Green LED blinks every 1 sec. and RED
LED blinks consecutively every 0.15 sec.
Upgrading rmware
4Green and RED blink every 0.15 sec, Green
and RED light on, then blink again.
Restoring defaults
5RED LED is on, Green LED blinks and RED
LED is constantly on.
Status after a reset (network connected)
Green and RED LEDs are constantly on. Status after a reset (network
disconnected)

VIVOTEK
12 - User's Manual
Hardware Reset
The reset button is used to reset the system or restore the factory default settings.
Sometimes resetting the system can return the camera to normal operation. If the system
problems remain after reset, restore the factory settings and install again.
Reset: Press the recessed reset button. Wait for the Network Camera to reboot.
Restore: Press and hold the reset button until the status LED rapidly blinks. Note that all
settings will be restored to factory default. Upon successful restore, the status LED will
blink green and red during normal operation.
SD/SDHC/SDXC Card Capacity
This network camera is compliant with SD/SDHC/SDXC 16GB / 8GB / 32GB / 64GB and
other preceding standard SD cards.
Reset Button
Connector Pinouts
The DO+ pin is a 12V output signal with a max. load of 50mA. The max. voltage for the
DO- pin is 80VDC.
Au+
Au-
MIC P
MIC N
DO+
DO-
DI+
DI-

VIVOTEK
User's Manual - 13
Network Deployment
General Connection (PoE)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, allowing transmission of power and data via a sin-
gle Ethernet cable. Follow the below illustration to connect the Network Camera to a PoE-
enabled switch via Ethernet cable.
PoE Switch
When using a non-PoE switch
Use a PoE power injector (optional) to connect between the Network Camera and a non-
PoE switch.
Non-PoE Switch
PoE Power Injector
(optional)
NOTE:
1. The camera is only to be connected to PoE networks without routing to outside plants.
2. For PoE connection, use only UL listed I.T.E. with PoE output.
802.3af

VIVOTEK
14 - User's Manual
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 16 for
details.
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
LAN (Local Area Network)
Router IP address : 192.168.0.1
WAN (Wide Area Network )
Router IP address : from ISP
Cable or DSL Modem
POWER COLLISION
LINK
RECEIVE
PARTITION
12345
Internet
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ HTTP port: default is 80
■ RTSP port: default is 554
■ RTP port for video: default is 5556
■ RTCP port for video: default is 5557
If you have changed the port numbers on the Network page, please open the ports
accordingly on your router. For information on how to forward ports on the router, please refer
to your router’s user’s manual.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 72 for details.
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN setting on page 71 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 72 for details.

VIVOTEK
User's Manual - 15
Congure the router, virtual server or rewall, so that the router can forward any data com-
ing into a precongured port number to a network camera on the private network, and
allow data from the camera to be transmitted to the outside of the network over the same
path.
From Forward to
122.146.57.120:8000 192.168.2.10:80
122.146.57.120:8001 192.168.2.11:80
... ...
When properly congured, you can access a camera behind the router using the HTTP
request such as follows: http://122.146.57.120:8000
If you change the port numbers on the Network conguration page, please open the ports
accordingly on your router. For example, you can open a management session with your
router to congure access through the router to the camera within your local network.
Please consult your network administrator for router conguration if you have troubles with
the conguration.
For more information with network conguration options (such as that of streaming ports),
please refer to Conguration > Network Settings. VIVOTEK also provides the automatic
port forwarding feature as an NAT traversal function with the precondition that your router
must support the UPnP port forwarding feature.

VIVOTEK
16 - User's Manual
Software Installation
Installation Wizard 2 (IW2), a software included in the product CD, helps you set up your
Network Camera on the LAN.
1. Install IW2 under the Software Utility directory from the software CD.
Double-click the IW2 shortcut on your desktop to launch the program.
2. The program will conduct an analysis of your network environment.
After your network environment is analyzed, please click Next to continue the program.
3. The program will search for all VIVOTEK network devices on the same LAN.
4. After a brief search, the installer window will prompt. Click on the MAC and model name
that matches the one printed on the product label. You can then double-click on the address
to open a management session with the Network Camera.
0002D1730202
00-02-D1-73-02-02 192.168.5.151 IB836BA
Installation
Wizard 2
IW
2
Network Camera
Model No: IB836BA
Made in Taiwan
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Pat. 6,930,709
MAC:0002D1730202
R o HS

VIVOTEK
User's Manual - 17
Ready to Use
1.A browser session with the Network Camera should prompt as shown below.
2.You should be able to see live video from your camera. You may also install the 32-channel
recording software from the software CD in a deployment consisting of multiple cameras. For
its installation details, please refer to its related documents.
IB836BA
• The "E" models, e.g., IB836BA-EHF3, IB836BA-EHT, are able to operate in low temperature
environments. However, when starting these cameras in a very low termperature condition,
e.g., -40ºC, the embedded heater may take half an hour to warm up the camera. When the
temperature within the canister reaches -10ºC, the camera automatically starts.
IMPORTANT:

VIVOTEK
18 - User's Manual
Auto Focus
On the web session, visit the Configuration > Image > Focus window. Perform the
Auto Focus function for best image. However, if you have cascaded cameras, do this
one by one. Do not perform this function simultaneously on multiple cameras because
the motorized lens also consume considerable amount of power, and may cause the last
camera on the line to hang.

VIVOTEK
User's Manual - 19
Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and VIVOTEK recording software.
Using Web Browsers
Use Installation Wizard 2 (IW2) to access the Network Cameras on LAN.
If your network environment is not a LAN, follow these steps to access the Netwotk Camera:
1. Launch your web browser (e.g., Microsoft®Internet Explorer or Mozilla Firefox).
2. Enter the IP address of the Network Camera in the address eld. Press Enter.
3. Live video will be displayed in your web browser.
4. If it is the rst time installing the VIVOTEK network camera, an information bar will prompt as
shown below. Follow the instructions to install the required plug-in on your computer.
NOTE
► For Mozilla Firefox or Chrome users, your browser will use Quick Time to stream the live
video. If you don’t have Quick Time on your computer, please download it rst, then launch
the web browser.
NOTE:

VIVOTEK
20 - User's Manual
► By default, the Network Camera is not password-protected. To prevent unauthorized access,
it is highly recommended to set a password for the Network Camera.
For more information about how to enable password protection, please refer to Security on
page 89.
► If you see a dialog box indicating that your security settings prohibit running ActiveX®
Controls, please enable the ActiveX®Controls for your browser.
1. Choose Tools > Internet Options > Security > Custom Level.
2. Look for Download signed ActiveX®controls; select Enable or Prompt. Click OK.
3. Refresh your web browser, then install the ActiveX®control. Follow the instructions to
complete installation.