Vixen Horns VXA7240C User manual

VXA7240C
INSTALLATION GUIDE
PAGE 1 of 2
BEFORE BEGINNING YOUR INSTALLATION
Read through the instruction guide before getting started with the installation. Professional installation is recommended for
this product.
CONTENTS
240 PSI Single Needle Air Pressure Gauge (White Face/Chrome Bezel)
SAFETY INSTRUCTIONS
Do not apply shock to the product such as by dropping, doing so will affect its precision.
For better results, install the air gauge perpendicular to the ground with the zero point on the dial at the bottom.
Apply sealant to fitting's threads before assembly. DO NOT OVER TIGHTEN.
Ensure that your air system has no pressure before starting the installation.
MOUNTING
In one of the Air Tank’s 1/4" NPT ports, using the thread sealant provided, install the air pressure gauge.
The side or top of the tank is the best location to use as to prevent condensation from entering into the
gauge.
Dropping or disturbing the product can affect the product’s accuracy.
For best results, the air gauge should be installed perpendicular to the ground, with the zero facing the
bottom.
To tighten the pressure gauge into the air tank, place a wrench over the square wrench flats to tum the
gauge. This is the proper way to avoid air leakage or damage.

VXA7240C
INSTALLATION GUIDE
PAGE 2 of 2
DIMENSIONS