Vizio VW32L HDTV40A User manual

V1270 is a registered tmdama»? of 1.4210, Ina obs V, Inc.
HUM! 159:: and ‘High Defrzifion Mazlzimedia Inkadzzcc” are
regisaleared trademarks of J-IBM! Licansirzg LLC.
Manufaciumd under Iicerrsa lram Dcfby Lgaboratorias.
V1210”
Dear V5230 Customer,
Congratuiaticns on your new WZIO VWBZL
HDT\/40A High Definition LCD Teievision
purchase. Thank you far your support. For
maximum benefit cf yam set, piease read these
instructions before making any adjustments, and
retain them fox future reference. Lwe hcpe you will
experience many years of enjoyrnem from your
new W210 VW32L HDTWLDA.
For assistance, please can [phone] or 3-
maii us at [email protected].
To purchase at inquire about accessafies and
insiallation sarvices for your V1210 LCD HDTV,
péaase visit our website at www.V¥ZIO.com or
call 10:! free at 888-VIZIOCE (888-849-4623).
We recommend ybu register your Vlzio VW32L
HDTV40A aims: at our website Egmtxigflmm
or fill in your registration card and mail it m. For
peace of mind and to psotect your investment
beyond the standard warranty, WZIO offers on-
site extended warranty service plans. These
pians give additional coverage during the
standard warranty period. Visit our website er cat!
us to purchase a pian. V L 7
Write down the/seriai number focated on the back
of yew W250 VWSZL H—DTV40A.____ __ ____ _, _
Purchase 0816
Dolby and 11573 dou£:b—D symbol‘ are wacfiamarks at Dow Labcraiorias.
THE 'l"RA!)£MAfl'K5 SHOWN H=EfiE!N ARE ‘WE PBOPEKTV OF THEIR RE$P£CTW E OUVNERS; IMAGES USED ARE FOR
ii.LUSTR£T!0!4l PURPOSES ONLY. BRAVO, V1230 AND THE V LDGO AND WHERE ‘VISSOK MEETS VALUE AND OTHER
V
L an“
DIGITAL
LGE Inc.
V Inv. No. 337—TA-687
¢’:DT/
tvuuee‘-E193 —n.zau-us
I-IEJITII
CX-502
VW32i. HDTV4GA Ussr Manuai
WZIO TR8DE&iA8KS ARETHE MTELLECIUKL 3i’ROPER'TY {SF W230 ENC. F*ROi)UCT $PEC’flCAT!ONS ARE SUBJECT TO
CHANGE WITHOUT NOTECE OB OBUGATION. Q 2&8 V1210 INC. ALL B36875 RESERVED.
Version 81182008
,,‘_
-2
wavw.V!Zi0.corn
VIZ687 0911335

VIZSO9 VWSZL HDTV4(§A User Manuai
smpmrfant Saf‘9t‘\; $na‘tr“umt'it3a*:$
This product is designed and manufactured to operate within defined design Hmlts, and misuse
may result in electric shock OI‘ flre. To prevent the product from being damaged, the following
rules shouid be observed to: the instaflation, use and maintenance of the ptoduct.,Flead the
following safety instructions before operating the dispiay. Keep these instructions in a safe place
for future reference.
- £0 fgfduae the task or electric shock or component damage. swatch 031 the gower beiore oonmstmg other components to the \?W32L
H0 40A.
- Unpiug the pewe: com betore cleaning me W‘v‘32L HDTVMGA LCD. A dam}: cloth is sulficient iar cleaning the VW325. HDTNMOA. Do
not use a iiquid or a spray cieaner for cieaning the sawdust, Do not use abrasive cleaners,
- Mways use the accessories reaommendedbythe manufactures’ to insure oompaflailfiy. ~.
o Wmn moving the VW82L HDTV40A from an area oi tow temperature to an area of high tsmpexature, condensation may farm on me
housing, Do not ium on the VWSEL HUTWMGA immediately after this to avoid causing fire, electrk: shock or component damage.
0 Do not piaee the VWSZL HDTKMOA on an unstabie cart, stand, or tatfie. S! the VW32L_ HDT\‘-30A fails, it can infiwe a petson and cause
sesious damage to the appfianca. Use canly a cart or stand recommended by the manufactular er said with the \N'l32L HDTVAOA.
- A distance of at leasi 3 feet sbouid be maintained between the VW32L HDTV48A and any has source, Le. tadiator, heater, oven,
agzliiet sic. Do not hstafi the product ciose to smoke. Oparaling the pmduct close to smoke or moisture may cause fire otelecxric
s
0 Slots. and opianings in the back and buiiom ul the uabiual ale pwvided Iu! veirtikatiiaun. Tu ensure reliable ogutaiimu of the VW32‘L
HDTVIKJA and in pmtaczi it fmm overheating, be sure these upenings are not blocked Di coveted. Do not place the ‘.~‘W:32L Hi_3TV4OA in
a bookcase at cabinet uniess prape-r venibtian is provided.
s Never push any object into the sloi on the VW32L HDTVAOA (zbinet. Do :10! piace aw cbfacts an the lag of {he product. ft could short
circuit parts causing afire or electric shock. Never spiit iquids omits VW32L HDTVAOA.
A The VWGZL HDTV-40A should be operated only from the type of power source indfioated on the labef. I! you are mt sure of the type 0*!
power suppfied to your heme, consuit your dealer or beat powe: company. '
- Than :;ow?r cable must be rep5aced when using different v2a4ta;;e'fmm3haet spec-ifced in the User Manual. For more information. contact
your ea er. I _
o The \:‘W32L HDTV-40A is equipped wiiha thwépronged grounded ping, a ping with 3 third (grounding) pin. Ibis ping wiii ii: any
inko :3 gmunded pawn: outlet as a saicty icaturc. If your outlet dues no! accommodate the thxccmko plug,
have m eiecxrician imtaii the correct: outtest; or use an adapter to gound the appiiance safety. DO 1301
defeat the safety purpose 0! the grounded piug. 7
v when cosimocted‘ to a power outlet power is aiwuys into your HDTV. To totafiy disconnect the power.
unplug the pone: cord.
a use any with the cam stand, nipod, txaaket at tabie specified By mmufaciurer. er said win
ap;2aranr.=:_ when 3 mm‘ is used, use minim when moving the namapparams mniwflatinn to main injury
from tip-aver.
g The lightning flash with arrowhead symbol , wkhin an equflakera! triangle, '3 intended in alert the user to the
presence cf not isdaaed, darggerous vokage within the inside of the prcazct that may be suiticiem magnitude to
constitute a risk_of.e§eottic shock to persons. ~
u The eoadarvxafion point within an ettwfiaterai t:ia.n9$9 is iatendssi to aim: the user to
_ the ptasanca of inpoitaxit aperaiing and servicmg instmctiens in the lilerahma
accompanying ifIe—ap:itiance. , —
a Do not overload powav ships and extension cords‘ Oveiioatzfing can tesufl ‘mike O! dedric shock.
- T119 wast! soezket shat? be instaflod near the equipment 3.513 shall be easfiy aocessibb.
o Oniy the markad paws: soume can be used id:-r Ike product. Any power source othar than the spacifiad one
may cause fire or aiacttic shock.
0 Du neit loud: {hu puwe: Gmdduring fightniug. To weoird tzbuhiu mmid handing linu power mm! duping ukmhkw storms.
0 Unplixg the uni’ during a lightning slow: or when it wit! not be used for long peflod oi This wifi pretest the VW32L HDTYWOA tom
damage we to powet surges. ,
4 no nod attempt to repair or ssnfioe the pmmct yoursalt. Opening or removing the back cover may axposs you to high voltages, the risk
of eiactric shock, and other bazasfls. if repair is re-quéred. please contact your dealer and refer afl servicing to quafifiod santicapersonnei.
- Keep the prodaat away {mm moisture. Do not expose this appiianoe to rain at maisiure. 15 male! permttaies into this product, unplug
the vows! com and ctmsmi your dea§er. Gontinmus use in this case may msufi in fire ct etacisic shock.
- _ Do not use tbs ptoducz 5! any abnormaiay muss. if any smoke or odor becomes apparent. unplug the power cord and contact your
deaiei Do not try to «repair the produm youtseii.
- Avaici using dropped or damaged appiiamoas. 11 the prmxct is dropped and the’ housing is damaged, zhe internal components may
iunrztion abnormaliy. Unplug me’ you're: cosd‘ immsdiaxeiy and contact you: daaier for repair. Continued us; of the product may cause
fire or alectric. shock.
Var Do not install the prmmczt in an ayaa with heavy dust or high humicity. VOpe~rating the predict in emiranmems wiiiz heavy dust at high
humidity may cause: fire or eiacldc: shock
a Fofiew instructions for moving the product. Erisure that the power connector :s.nd’a.m' oiiret cabias ate unptugged beto=re_moving the
—produc!. _ ,.
Versmn 8118:2008 2
www.V3ZK}.<>om ,1,’
VIZ687 0011336

V1230” VW32L HDTV4GA User Manual
- Hold the power ccnnecto: when removing the power cable. Pulfing the power cable itsefi may damage the wines inside the cable and
cause fire or eiecttic shock. when the product will not be used for an amended period of time. unpmg the power connector.
4 To reduce Iisk of eisctric shock, :59 no: loud’: the waneaw with wet hands.
~ , Insert bmtelies in accordance with inskucfiens. incoweci poiariies may cause damage and Isak/age of the batteries. operator injury
and acmaminaiion ihe remote amttoilm.
- ti any of the ioaeowing occurs phase contact the deaser:
:.- The power connector faiis or irays.
Liquid sprays or any object drops into the VW32L F§DTV-SCIA.
The Display is exposed to rain or 021191 moisture.
The Display is dropped or damaged in any way.
V The perbmaance of the Dispiay changes sxiavszartiialiy,
- Operating environment. Temperature: 461‘ ~ 98!‘. Humicity: 20% ~ 80% notrcondensing. Altitude: 0 ~ £35/Oott (0 -v 200cm)
EH H H
Television fintenfia Conmestian Protectian
Extsarmat TE-:’¥.€2‘~.2¥5i£'.'if"t Hrztennzz. Efiraumczlinszg
If an outside antennafsateliite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is etectriaaliy grounded to provide some protection against voflage surges and
static charges.
Anide 810 cf /the Natéonat Eiecmca! Code. ANSUNFPSA 70, provides information with regard to proper
grounding of the mast and summing stméture, grounding of the %ead~in wire to an antenna discharge
unit, size of the grounding conductors,V!oz:ation of antenna discharge unit, connection to grounding
I electrodes, and requirements 0} the grounding electrode.
Lightning fiotection
For added protection of the High Definition TV during a
fightning storm or when it is left unattended or unused for
iong periads of ‘time, unpmg the TV from the wait cutie:
and disconnect the antenna er cabie: system.
Power Lines
[)9 not iocate the antenna near overhead fight or power mm.m..m.'”“"--~wm«-w-w~»m-m—~-
cirauits, or where i? could fan into such power fines or circuits.
Remember, the screen of the aoaxlai cable is intended to be connected to earth in the building
instaflation.
E’-=Ci: Buttatfin fins" New TU f3wr“n=.=:r“5
After 1?, 2009, a television receiver with only an analog broadcast ‘tuner win requisfie a
converter box to reeeive full power over-the-air btoadcasts with an antenna because of the
Nation's transition to digital brcadcasting. Analog-only TVs snouid continue to work as before to
receive low power, Ciass A or translator television stations and with came and satellite TV
services, gaming consoies, Vcfis, DVD piayers, and similar products.
lniormatkm about the DTV transition is avaitable from hjgggzx/‘www.DTV.g3 v or this manufacturer at L
377 MY vszm (371-693-4945), and from hit}; 3' !www.dtv2099gov or 1-388-DW-21309 for summation
about subsidized coupons for digaaletoaraalog converter boxes. V
Your W210 TV comes asith a buiit-in tuner capabte at processing digital broadcasts, making it
easier for you, theend user, to receive this type of signal without the need of an extra com:
box. ~
Version 8X18.-'2008 3 V V »
www.V!Zl0.com V W,’
VIZ687 8011337

V vszso Remote Control VR2
vszgoa vw32L H:::Tv4eA User Manna!
Gpraminag ‘the Parzziwgaga
‘(Bu)’ V1230 VW32L HDTXMOA and its accompanying accessaries are carefuiiy packed in a cardboard
carton that has been designed to prctect Li: tram tiansportaticn damage. Now you have opened the carton
check that the VW32L HDTV40A is in good condition and that at! of the accessories are included.
The N/W321. HDTV40A weighs approxémateiy 313bs and is over 31” wide and we advise that you take
sensibie lifting precautions when you unpack and instail me HDTV.
The screen can easily bescratched or broken so please handie the product gentiy and never phase the
HDTV with the glass facing downwards on a surface wmaout protective paddtng,
MPORTANT: Save the carton and packing materiai for future shipping.
Package Cenrentaa
V3ZiO VW32L HDTV-40A
Removable v:z:o Siam: Base and instructions
2 (Doubie A) Batteries for the Remate Control
Power Card
This User Manna!
Quick Setup Guide
Registratioh Card
V3? SSIWCGS BYOCNLKS
BMPOTANT: Do not appiy ‘pnessure or ths-ow any obiact [Into the sateen dismay area which may
compromise the integrity or the display. The manufacturers warranty does rtotycover user abuse
or improper instanatlons.
Version 8118:2008 V /4 »
www.V!2E20.com r ‘
V1268? 0011338

V3250’ vw32L Hmv4oA User Manna:
Rddfiriurxai Certified 8t3£38’SEC¥f'i&"$ far‘ fha V3290
U§a);3ai_. HBTUQQR are amid aemarafetg
Wafi Mourns
High Definition Cables
Extra or replacement Remote
V1210 aiso oifers msiaflation Services arid Extended Warranty Services for your V3250 VW32L HDW40A
To purchase or inquire about addétionai accesscries and services for your V1210 product‘ was: our web
site atLmm.Vi@ V .Qm or cati us ten free at 88836321065 ;{8$8~849-4623)
Instaiiafimn l=‘*jrf¢e:-=:;:.=.ar‘ai'imr‘: L
Piease read this user manual carefuny before installing your W210 HDTV.
Tha power consumption of the High Definition TV is ab<>ut'11OW, piease use we power con! designated
for TV, when an extension cord is required, use one with the correct power rating. The cord must be
grounded and the gmunding ieatura must not be defeated.
The TE/shouid be instafled on a flax surfase to avoid tipping. For proper ventiiation, you must allow space
between the back of the High Qeiinilion TV and?/the watt. 3-fyou wcmd iike to mount your TV on the wait
piease see bekvw ‘Preparing Your LCD HDTV for Wan Mounting’ for additionaf information. Avaid
instailing the W in {gases with high humidity, dust or smoke so as not to shorten the service life of the
electronic‘ compcrnesnts. * L
lnstaii the TV in fandscape orientation; any L90' cfockwise or counter-dcckwise instai1,ati0,nWmay induce
peer ventiiaticnand excessive component damage.
vszto offers professicenai vinstanation services, Psease centact V3230 for more information on these
services at 888-V%Z¥OCE (888-849-4628). or www.V1ZtO sum.
Version Sn 812008 5 __
~ www.vzzIo.com ..,,-
VIZ687 0011339

vxzso” vw32:_ HDTV4GA Usar Manna!
Ps“*.c3par'inz:5 Vmur 1.12:) 5-*§§3”§"‘\§» ‘Far wait. ?s“is.:es...ar*ri‘:§r*<Q
The V1210 VW82L HDTN/40A can either be kept on the stand bass or mounted an the waié fo: wewing. if
you choose ta mount the VW32L HDTV40A on the wall, please ioilow the instructions beiow for removing
the stand base. ’
‘Firs remmwe fiche grand base
1. Unplug at! of the cabies and cords
from your V1230 VWSQL HDTV40A.
2. Place the VWSEL HDTV4C«A face
down on a soft and flat surface
(blanket, foam, ckafiw, sic) tn prevent
any damage to the TV.
3. Remove the eight (8) screws homing
thebase to the VW32L HDTV-40 L
4. Caxefuiiy remove the stand base.
Now, the VW32L %~1DTV4OA can fit secureiy to
a mount (said separateiy) by utiiizing the
mounting holes in the center of the back pa =: A
ef the High Definition TV. Please maike sure to V
read the instructions of Wu: specific mount ta
propefiy hang the VW32L HDTVIKJA.
The pitch of the mounting mies is 420mm
horizontaity and 200mm vsrticaisy.
The screw type required is memo M8. 3 .25mm
pitch. The tength of the screws will depend on
the thickness data being attach to the TV set,
cur brackets some with different ¥e-rzgth
screws.
To find the perfect mount for the VIZVIO vW32L HDTV49A, browse V¥230’s eeriéfied mount seiection at
_;@.\?Iz!O.comj or cats: directly 888-VJZIOCE {888—849—4623).
Versian SI1 8/ZOQ8 6
wwwzviziacom ‘
VIZ687 091 1340

V1250” VWSZL HDT\l4GA User Manual
Tana»? £3‘? Cmnfanfa
C¥'3a'r':s.=2r :3. Fiaaii: (Z!.‘fsX‘!‘{'5‘“€.!{€« ans
1.1 Front Pane! . .. . . . . . . . . . .. . 9
1 2 Right Side Panel Con 0 s
13 Rear Pane! Connections .
1.4 V1220 Remote
1.4.1 Insertion of Batteries in me Remote Control.
1.4.2 Remote Cantrc! Range ....... .. ..
1.4.3 V3230 Remote Control Pteca
£':har:;i’s=.=r' 3 €.‘.«:.':r'cr*::v:;t'§i'r:'.; E’.r_§2..s;«;3n"a'~?: 9%“
2.1 which Video Connection Shouid I Use’?
2.2 Connecting Coaxia!'(FIF)
2.2.1 Using Your Anterma or Digital Game for DTV {T V .
2.2.2 Using the Antenna or Cabte through your VCR ..
23 Connecting Your HDTV Set~Top Box .................... ..
2.3.1 Using’HDMI ........................ ..
2.3.2 Using Component Video ..... ..
21$ Cunnecting Your Basic Set—Top Box ..
2.4.1 Using Corrpcsite Video ........ ..
2.4.2 Using Coax (HF) .......... ..
2.5 Connecting ‘(out DVD Player
2.5.1 U$ing HDM1 ................. ..
2.5.2 For DVD Psayers with ow:
2.5.?’ Using Corrponent Video...
2.5.4 Using S-Video {AV)......,..
2.6.5 Using Gornposite (AV) V¥dEO...
2.6 Connecting Your VCR 6: Video Camera
2.’? Connecting an external Reoeivev!Am;:o.....
2.7.! Optical Gutput of Audio received wit111HD.Progra.ms
2.8 Connecting a PC Computer .. _
2.8.1 Preset PC Resolutions...
2.9 Setting Up to Watch Teievision
2.10 Basic LCD HDTV Start Up ..
2.11 Watching a TV Prcagram ....... ..
2.12 Adjusiingessix: HDTV Settings ..
2.13 Pvogrem micrrmaticn ............. ..
2.14 lnfarmation an HDTV Status ......
Chaafar :3 F-tdvanceci fidjustrraerrir -12"?"
3.1 Using the On Screen Dispiay {CSO} .
3.2 DTV I TV Input Picture Adjustment”
3.2.! Picturauode .. V ‘
3.2.2 Sackiight
3.2.3 Bnghtness.
3.2.4 Contrast...
3.2.5 Gator...
3.2.6 Tint...
‘ 3.2.’? Sharpness .... ....... ..
3.2.8 Coéor ‘femparature...
3.2.9 Advanced Video ......
3.3 DTV I “W input Audio Adjustmem...
3.3.1 Volume
3.3.2 Bass....
3.3.3 Trebie .
3.3.4 Balanca.
3.3.5 Surround ............. ..
3.3.6 Digital Audie Out...
3.3.? Speakem ..
3.3.8 Lip Sync................
8.4 DTV 2* TV Tuner Setup ............................................. .... ..
....... ...................
Version 8-£18/2068 . 7
www.WZ§O.oom V K .3;
V1263? 0011341

\/12:0” vw32L HDTV4GA User Manual
3.4.1 Tuner Mode .................... ..
.................................... ..-45
3.4.2 Auto Search... .....45
3.4.3 Skip Charms: .. .....45
3.4.4 MTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..46
3.4.5 Time Zone ............ -48
3.4.6 Daylight Saving . . . . . ... ..46
3.5 DTV ! TV input Setup .....47
3.5.1 Language . . . . . . . . . . . . . . . . . ..47
3.5.2 Sleep Timer .......................... .. .....47
3.5.8 Wide . .. . "47
3.5.4 input Naming ............ .. ..48
3.5.5 Ckased Caption {CC} .......................... .. "49
3.5.6 Ciosed Caprion On Mute (CC On Mute) ) ...... .. .....49
3.5.? Digitas Ctosed Caption Styie {Digital CC Style)
3.5.8 Reset Ni Settings .............. .. ..50
3.6 DTV 1’ TV input Parentai Controh. ..51
3.6.1 Chame! Block ................ .. "51
3.6.2 US TV Rating .................. .. ..52
3.6.303 Movie Rating {For us}
3.6.4 Canadian English Rating ..
3.8.5 Canadian French Rating...
3.6.6 Check for New DTV Rating.
3.6.7 Biocked Unrated Prcgvamming
3.6.8 Change the Passwotd
3.7 HDMI input Picture Ad3u2tment... _
3.8 HDNH ‘input Audio Adiustmem . ............. .. ..56
3.9 HDNH input Setup ...................... ..
3.10 Video input Picture Adjustment.
3.11 Video: Enpul Audio Adjustment
3.12 Video input Setup ................. ..
8.13 ‘vfidee input Parental Cannot ..
3.14 PO inpui Pictme Adjustment. ..59
‘ 3,163.1 Auio Adjust ................ .. ..59
3.14.2 Badslight ..... .. -59
3.14.3 Brigh1ness.. ..60
3.14.4 C.‘-ontrast..... ..60
3.14.5 Gcror Temperature. ..61
3.14.6 H-SIZE ................. .. ..61
3.14.? H. Position . "61
3.14.81 Position . ..62
3.14.9 Fine Tune ..................... .. ..62
3.15 PC input Audio Adiustmanz ..62.
3.16 PC input Setup ..... ................ .. ..62
3.}? Understanding Viewing Features . ..,63
3.111 Viewing Modes ................... .. .. . .
3.18 Using a Came or Sateflite Remote .......... ......... .. ......................... ..
4.? Maintenance .............. ......................................................... .. y ............. .. ..
4.2 TV and Stand 3836 Assembiy" .65
4.3 Troubleshooting Guide ........... .. . 65
4.4 Teiephone 8. Technica! Support.
45 Compliance ............................... .. . .
, ’ 4.6 FCC Class Bfiadfio interference Statement ....................................................... ................ ....... .. 0'68’
C5°t&;:3i‘£?§" 53 ?s1£:»2.e::-9113:“. ..sus £nf*«.:zrmax-sass‘; . . .. V .
5.1 Ssiecifications ......... .............. ..
5.2 Geiossary —- Standard Definitiorss..
5.3 mdex
Version 8i18i’2008 8 A
www.WZlO.com~ V _ ,
VIZ687 001 1342

v:z:o° VWSZL HDTVIKEA User Manual
Chapter .1 Baaicz CIQfi‘§‘."3“‘“‘£'.‘i1.$ arm: Ccsfiflfiaficnss
1.1 Frank Panel.
Power ‘VIZIO’ tight - The WZIO name lights white when
powered on and mange when powered off. 7
Remote Control Sensor - This is the window through which
an of the remote control signals pass to the sensor. Point the
remote control direcfly at this window for the best response to
the Iemete signal.
1.2 Right“ Side Pang. Eanfrrslxea
Power { 53'“ }- Switch the VW322. HDTV40A on by pressing the button cnce. Press the button again to
the VW32L HDTXMOA off.
new ~ This button activates the on Screen Dismay (080).
if a sub—menu 35 active, pressing this button wiii return in the
previous menu testes. ‘
Channel +;’- - Lise these buttons to step up or down the TV
channeis. While the OS!) is active, these buttons function as
up and down ccntrais in the OSD menus.
Vemme +I- —- use these buttons to increase or decrease to
the speaker voiume. Whiie the OSD is active, these buttons
function as ieft and réght controls in the OSD menus.
Input ~ Repeated pressing of this buttons steps zhreugh the 7
input sources in the
fwwm w» Av
{SNIDEO}, Compenent 1, ~ 7 LL 7 T T
Component 2, RGB, HDMH
and HDML2. Once you have
stepped through the entire
sequence, yea win retain ta
the beginning.
Version 811 812008 V 9
www.V!ZiO.com V
VIZ687 0011343

vrzso“ VW32L HDTV-40A User Manual
1.3 Rear Panei C.Qf“}f3§%:'3‘i’I£3fi$
1. AG in - Piug-in the suppiied Ac Power Cord here.“ .
2. SERVICE - This custom communication port iefor factory service oniy. Use of this input for
any purpose other than iaciaory authorized service will void the manufacturer’s
D warranty of this equipment.
8. HDMI 1 — Connect the primary source for digita: video such as a DVD multimedia piayer or
set top box through this an digitai connector. The white color band on the rear of the High
Definition ‘N indicates this connection.
4. HDMI 2 - Connect the secondary source for digitai video such as a DVD muitimeoia playeror
set top box through this an digits! connector. The white color band on the rear of the High
ibefinizion TV indicates this connection. For users who want to connect to a DV1 enabied
device, use a DVi~HDMI came and connect the Analog Audio output of me device to the L4-R
AUDIO here. Your V1210 Certified HDM1 and HDM!-Dvi cables are avaiiabie for purchase
from www.Vi2i0.com or by caning 88&VlZiOCE (888-849-4623)-
5. RG8 PC — Connect the video and audio from a computer here. The biue coior band on the
rear of the High Definition TV indicates this connection. A vs” plug stereo oabie is needed to
connect the audio out from the computer to the W8“ fack coonectorin the rear of the High
Definition TV.
6. COMPONENT 1 (YPbICb?r1Cr with sudio UR) - Connect the primary source for
oomponent video devicee such as a DVD Piayer or set top box here. From left to right, use D
L green for Y, bins for Pb (or Go), red for Pr {or Cr), white for ieft audio and red for right audio
inputs. The green coior bandon the rear of the High Definition TV indicates this connection.
7. COMPONENT 2 (YPbtCbPtICr with Audio UR} —— Connect the secondary source for
component video devices such as a DVD Piayer or set top box here. From left to right, use
green for Y, bins in: Po {or Go). red is’: P!’ {or Cf). white for left audio and red for right audio
inputs. The purpie color band on the rear of the High Definition TV indicates this connection.
8. AVIS-VSQEO - Connect the source for composite video devices, such as a VCR or video
game. Use the white and red connectors ioc/onneoz the extemai audio from theesame source.
This connection is on rear side of the High Definition TV. The sigma: being carried by the S-
Video cabie and connector; if connected, wiii take priority over the video {yeiiow connecior}
RCA oonnecior, Keep in mind the: if audio is needed then left (white connector) anderight {red
connector) must be connected to the signal source using the RCA audio patch cables.
9. DTWTV -- Connect! to an antenna or digitai same (no Cable Box) for Digital TV)”
113. 0PTiCAL DIGITAL AS3010 OUT ~ when a digiiat audio signal is associated with an input
which is selected for viewing, zhe digizai audio associated with digital programming win he
avaiiabie on this SF'DiF Qpticai conneaeor for connection to your home theatre system. The
white coior band on ihe rear of the TV indicates this connection. “
“ For digitai TV siations in your area visit www.antennaweb.org.
Version 8!‘) 82608 D 113 L » 4
www.Vi2i0.com ;
V1268? 0911344

V!;~:IC:° VW82L HDTWLOA User Manuai
1,4 mats Remzatw Cmnfrai
GUIDE — This button displays program informaticn. Prass ‘this button once and the information of the
program; being viewed is Shawn. Press it a second {me and the Eiecironic Progsammmg Guide wit}
appear in the screen.
POWER — Press thisvbutton to turn the TV on from the Standby made. Press it again to return to the
Standby mode.
Tv .- Press this button to select; iv.
AV — Press this button to seiect the Audio Video input. Pressing this button
repeatedly wilt get yau to the AV input Keep in mind that if 8-Video cabie is
being used. than AV wit! show the sigma! going through this input as the S-
videa takes priority. ~
COMPONENT - Wags this button to seiec: the Component (‘{PbP:) input.
Pressing this butttm repeatediy wiil take you through the Component
(Component 1 and component 2) inputs.
Ham - Press this button to same! the HDMi input. Pressing this button
repeatecfiy wm get you through the HDM! {i-JDMH, and HDMI 2} diiferenif
inputs
MENU - Use this button for the Oaéscraen Dispiay {OSD} menus. when use
within the OSD menus. messing this key wit; make the seiection cf an optiszm.
Q” Q — These buttons navigate the On-Screen mspiay (O89).
HUTE - This button turns the sound on and off. L « %
LAST ~— This button recazls the previ:>us§y viewed céxanngj when it és used in
TV mode; meaning that the TV unit has control over/the signal or program
bemg waiched. This batten aiso has different funcfions when bemg used in
congunctiors with the onscreen Dispiay {OSD} menu.
VOL {+ or -} -— fhese battens tum me vaiume ui Oi’ sown.
4’ TV
channels up or down.
Rumba: Button Pad, -5 Use these buttons
to seiect a channel er enter a password.
RIPUT -— This butter: afiows the user to
cycie through the inputs. Repeatediy
pressing of zhis huttonwitistep yea through
1:23 input sources in the foiiowing sequerzee:
TV, AV (S~Video}, Component? ,
Componeme, RG8, HDMH and HDM32.
Once you have stepped through the entire
sequence, you wifl rezum to the beginning.
- (DASH; - when seiecting a digitai
channel dérectiy, use this button for the 7
separation of main and subchanneis. Fe? example, channei 28~2 would be
sequence 28 -2. L 7
CH (+ or -V) - These buttons change the
selected by the buttgn
versmn 8.1182008 V :1 V V »
V \wvw.VIZl€>.ceo-m ‘ \,si
VIZ687 081 1345

‘$312506 VWSEL HDTV4GA User Manua!
:L-4.::_ insaerfimrz 1:3?‘ Ba€:*i'er§£=s, in Trhe F:9mz:z’€'e Cc3rz?.:*rL:ci
Press and slide out the battery cover by foiiowirsg the direction shown by the moided arrow on the surface
of the cover.
insert two AA batteries imc the vemc-36 cuntrc-1. Make sun; that you match the (+) and i-) symbois on the
batteries with the (+) and {—} symbols inséde me battery compartment.
Press and slide the battery cover back into place.
Precautionary Tips for inserting the Batteries:
Qniy use the specified AA batteries.
Do not mix new and 01d batteries. This may result in cracking Of Ieakage
that may pass a fire risk or lead to personal injury.
inserting the batteries incorrectiy may atso result in cracking or Ieakage
that may pose a fire risk or read to personal injury.
Dispose cf the bafiefies in accordance with iocal laws and reguiations.
Keep the batteries away from children and pets.
:L.z:;',;;<.a:f?ie'm*.::t";se ficanfrcat R&f1Q€
Point the remote control at the {emote control senser to transmitthe commands.
Do not mace any obstacles between the remote centre} and the receiver window.
The effective range of the remote contrm is approximaieiy 30 feet (10 meters} from the iron: of the
receiver window, 38° tn the left and right, 20° upand down.
1.4.3 U£:":E§€3 §=Z1=.>;'n:::2!.‘:='.» Ccanfroi Preczaufiszans
V The remote controi shouid be kept dry and away from heat sources. Avoid humidity.
if the ‘W responds erratically to the remois contra! or does» not respond at an, check the batteries. if the
batteries are low 0!‘ exhausted, repiaoe them with fresh batteries. L
Whennot using the remote contra: for aseng period of time, remove the batteries.
Do no! zakéa the batteries apart, heat them, or tfircw them into a fire.
Do not subject the remote centre: to undue physical stress, such as strikiflg ‘aw dropping it.
Do not attempt to cleanihe remote csmrmwith a vclatiie soivent. Moe it with a clean, damp cicsth.
Versicn 8118:3308 12 V
www.V!Z!O.oom ~ - » ,
VIZ687 001 1346

vtzso° vw32L HaTv4oA User Manual
Chan??? a Cmmnecfifiq Equigzsment“
3-3. which Uéaeo Cannection Should I uae‘?
The V1210 VW32L HDTXMOA has six different ways to connect your video equipment from a basic
connection to the most advanced for dsggtai dispiays.
HDM! (High-Definition Multimedia inleiface) — It is the
first and aniy industry-supported, uncompressed, all. g
di9ita8 audioivideo interface. HEM! provides an
interface between any audits/video source, such as a
set-tap box. DVD player. or A/V receiver and an
audit» andlor védeo monitof, such as a cigitai
teievision (DTV). over a singfe cabie.
E {QTY Coaxial RF. when used for MPEG2 encoded
%
bit streams from ATSC bmadcasi pmgramming, this 1
input Sakes advantage of the High Definition content. %
TV Coaxial RF. This ss the comecrson for standard
‘ - NTSC TV uséng, antenna or cabse.
RG8 PC (VGA) —— Thzsvideo inpu: has separate rad, E
. green and base color componenm. The signaiz
Blue catries horizontal and veftica! sync irntormation on
the green signat This is most commonty used in:
Pcinput.
‘cross color‘ effects where ciosely spaced black and
white fines are erroneously displayed in coior. it also
‘enabiesiextio be.disp3ayed—:'no_re sharpiy. ’
§
§
A g
E
3 .
%‘“ “ V
E viorrxporggenttg The vid’%e¥<;§igna;his ra;:fI
tea 5 na . one co. mg e ~a w e
E Gee“ information and the other two containing the cosor
E Pang; irsformation. This enhancement aver S-Video takes %
g “we advantage‘ of me superior picture provided by,
5 ‘ progressive scan DVD piayers and HDTVfo:mats. E
W * ‘ ‘ ‘'§
§ Composme {AV} - Téxe comptete video signal is’
§ carried through this single (yefiowjs pin connectat.
§ This is the most mmmcmiy used video sonneétion.
E Yeltcsw S-Video (AV) - The video signed is separated into two
. ' am; signals, , one containing the b§a::k~and~white
E Red Jntormafion and the other containing the cedar
E
1
L * i
information. Sapzuafing the color in this way avoids ¥ ‘
%
§
1
Note; For rmrsre §z‘ifO refer it: the Quick Eéiart Guéde
Versien 811812068 713 V
www.VIZlO.c:om ,,
“W.
VIZ68’? 001 1347

V1230“ VW32L HDTV4OA User Manual
a.a Carzmecztinq £':.:::s.a:.+<§a; {RF}
za.za..;3. L¥&i3”‘fi£;} Vmur §=ir1t‘@r'ar3a :31“ Siécgitzaé. Caabie f'::3r° i1'.iTU /TU
Tum off the power to the HDTV.
Connect the coaxiai (RF) connector from your antenna or digitai
cabie (ou1—of~the~waI1, not from the Game Box) to the DTWW
CABLE/ANTENNA connector.
Tum on the power to the HDTV.
Seiect BTV using the INPUT button on the remote at side of the
High Definition TV, or directiy by pressing the TV buflon on me
Remote Controt. L
."*§'°
Not all digital TV broadcasts are High Definition {H13}. Refer to the
program guides, or consist: your cable. sateltiie or TV station operator.
Digitai broadcasts are not avaiiabie in all years. Refer to
www.antennaweb.org for detaiied informatian.
Make sure the antenna and Acoaxiai cabie are cosrecfiy grounded.
Far Prcfessional instaitation contact us atm~w.V1Z%O.com or cat! *1 ~888«
VIZIOGE (1»88S«849—4823).
Turn off thepower to the HBTV and VCR.
2. ~ Connect the “Out;:>utLtLo “RF Out“ or “Antenna Out” connecto; V * >
on the rear of your VCR to the DTV/TV CABLE/ANTENNA
* connector at the rear cf the High Definition TV.
8. Tum on the power to the HDTV and VCR. WV ' _
4. Select TV using the INPUT button on the iemote or side of the ‘M _
High Definition TV, or directiy by pressing the TV button on the L V
Remete Controi. V 1 ‘a
Note: if yopkhave an off-air antenna or aabie TV, connect
it to the “Antenna in” connects: an the rear of your VCR.
Version 811 812008 14
www.v1;:c.c»om _
VIZ687 G01 1348

V1210’ vw32L Ho'rv4eA User Manna!
a3 ficsnnacfinq Vmur HETK} $2-::t'~Tc3p Bax
a..g.:.:. Usairaczg HDMI
HDTV Set-Top Boxes mat have a HUM! digital interface shouid be connected to the HDMl input of the
LCD HDTV for optimal resuits. ,
Cxsnnszcttnzzg yrszur‘ HBTKI Seatfi-‘°$”z3;:.': Bax {Best}:
,‘,
Turn off the pewer 10 the HDTV and HDTV Set-Top Box.
Connect a HDNH cable to the HDM1 outpui of your HDTV Set-Tap Box and the other end to
the HON“ input (white coior area) at ihe {ear of the High Definition TV.
“mm, on the power :0 the HDTV and HDTV Set-Top Box.
Seiect HUM! 1 using the WPUT button an the remote or side of the High Definition TV, or
directzy by pressing the HDMI button on the Remote Comrci.
‘it HUM! 1 is being used‘ used HDMI 2 as the input and foflow steps 1 through 3: and than
seksct HDMt 2 in step 4.
S»"‘:“.‘-"!‘~”:‘*
a} The HOME ingeut an the HDTV supports High~bandw%dth Digitai (Semen: Protection
L {HOOP}. HOOP encrypts tbs ‘transmissbn between the video source and the
digits} display for added security and protection.
in) ~ Refer it) your HDTV Set—Top Box usar manual for more mfermation about the
video output requitements of the ymduct ,0: cunsult yam: cabia or sat:-mite upesaioi.
Versiisn 8;: 82903 L 15 V
www.VtZ1G.oem ‘ V i ~ N‘
VIZ687 0011349

V1220“ VW321. HDTV40A User Mama:
Far“ HBTU Set-T239 Snxaa with QUE:
.4.
.
Turn off the power to the HDTV and HDTV Set~Top Box.
2. Using a HDM!-DVI cable, connect the DV! and to your HDTV Set~Top Box and the HDMi end
to the Haw Input {white coior area) at the rear of the High Definiiion TV.
3. Using an audio. cable (white and red connectors)‘, connect the catrie to the audéo output
, connectors associated with the DVE output on your HDTV Se-t—T£'op Bax and connect the other
end to the audio“ oonnectofs associated with the HDMI imam! {white area) at the rear of the
High Definition TV. ‘
Tum on the power to the HDTV and HDTV 8et~Top Box.
Setect HDMI using the INPUT buiton on the remote or side of ihe High Definition TV, or
directly bypressing the HDM! button on me Remote Coniroi.
5”?‘
#3913; The HDM! kaput is for Hf} ‘tliiiérrs arm“! !.3$E€‘:g HD¥*a;§!~§::\;‘i wm‘ may sugzpozi Wxééfi as 6?}?-.’z {mm 9; F13.
Use:«:« the RGB PC input far greater aasfeciion of FC §:2:1'r*«.=3.%.<«:~.
The'HDM1-input on the HQTV supports, Highbandwidth Digitai Content Protection
(HOOP). HDCP encrypts the transmission beiween the video source and the
digitai display for added security and protection.
Refer to your HDTV Set-Top Box user manna! for more information about the
video output requirements cf the product or consuit your cab-fie ojrsateflite operator.
Version snsaoos L L 16 L L
A wvm*».V}ZIO.com V L «V?
3112687 9011350 A

W306 VW32L HDTV40}\ User Mama!
a.;5.a Using Ccmpmnent‘ ‘U§::£ss-3::
Ccsmnavcstinzzg your HDTV Set'~Tc:»;3 8:2}: {Bet-t-er):
;::*--='-:‘
*1
1. Turn off the power to the HDTV and HDTV Set«Top Box.
2. Connect the Y (green color} connector on your HDTV Set-Top Box to the corresponding Y
(green ooior) connector in the ‘Component 1 group (green coior atea ~ row of connectors
nearest to you when viewing from the rear of the High Definition TV) at the rear of the High
Definition TV.
3. Connectthg Pb (biue color} connector on your HDTV 8ei—To,o Box to the corresponding Pb
(blue coior} /connecio: in the Comoonent 1 group {green coior area ~ row oi connectors
nearest to you when viewing from the rear of the High Definition TV} at the rear of the High
Definition TV.
4. Connect the Pr (red color) connector on you}? HDTV Set—Top Box to the corresponding Pr (red
color} connector in the Component 1 group (green color area - rowoof connectors nearest to
you when viewing from the rear 09 the High Definition TV} at the rear of the High Definition
TV.
5. Using an audio oabie {white and red connectors}, connect the came to the audio output
connectors associated with the Component output on your HDTV Set-Top Box and connect
the other end to the audio connectors associated with the Component 1 inpui (green coicr
area} at the rear of the High Definition TV.
Turn on the power to the HDTV and HDTV Set-Top Box,
Seieot Component 1 using the SNPUT button on the remote or side of the High Definizion TV.
or directiy by pressing the Component button on the Remote Controi.
8. if Componeni 1 input is being used, use Component 2 as the input and foiiow the steps 1
through 6; and than seit-act Component 2 in step 7.
749’
Note:
Refer to your HDTV Set-Top Box user manuai for mom inforrnation about the
video output requirements 0? the product or consult your cable or osaiellite operator.
Version 8/1 8/2608 '1 7 _
www.’iflZi0.oom \ oi
VIZ687 0011351

V1230‘? VW32L HDTV4{}A User Manuai
3.4 E:£'5f"2i"§Qt.';3‘§'§f":Q Vgur Basic: S2t'~“3‘::Q Ea:-4
aa...4.:g Uairxzzg ilmmgzmaite Uidetn
1. Turn off the power to the HDTV and Set-Top Box. ..-
2. Using the AV Cable, connect the Video {yenow color)
connector on year Set—Top Box ta the corresponding Vicieo
(yeliow color} connector in the AV group (yefiow comr area} j
at the rear of the High Definition TV.
3. Using the white and red connectors, connect the cable to W 7
the audio output connectors associated with the Video
output on your Set-Top Box and connect the other and to
the audio connestcars associated with the AV input {yeuow
color area} at the rear 03‘ the High Definifien TV. £__=; "’“
4. Tum an the power to ma TV and {Sat-Top Bax. W
5. Seéectév using the INPUT buttan on the remste or side at the High Definition TV, or directiy
by pressing the AV button on the Remote Contmt,
a.4*a3 L3ss.2i"es:3 €.".c)a>-t {RF}
.
Turn off the power to the HDTV and Set—Top Box.
2. Using a Coax (RF) cable, cennect one endto the TV OUT {RF} on your
Se: Top Box and the other and to the DTVITV input at the rear of the
High Definition TV.
Turn on the power to the HDTV and Set-TopBox.
Seisct Ts; using {he 1NPuTVnu:zon on the remcte or state cf the
High Definfiion TV, or directly by pressing the T52 button (iaeiow ”~*" ‘
the GUHDE button) on the Remote Gontroi. ”
P 93
.w_W..,...._~....4.._¢,
Note: Refer to your 39: Top 80:: user manual for more mformation
about seiectsng the video or RF output of the prcséuct.
Version 82'1 812008 . 1 8
‘ www.V!2l{}.<;orn ‘ 3,-
VIZ687 0011352

Avxzao’ vw:s2L HDTV4GA User Manuai
ag Cmnnecrinq Vaurf QUE} Player‘
You have several options for conneciing your DVD piayer to your VIZIO VWSQL HDTV40A; HDML
Component, AV (S-Video or Composite} inputs. Based on your configuration. you can decide which
option is right for you.
2.5 .1, Using HEM!
DVD prayers thai have a digita! interface such as HDM: {High Definition Muftimedia Interface) shouid be
connected to the HDME input of the V1210 VW32L HDTV4-OA for optimal resuits.
1. Turn off the power to the High Deienmon TV am DVD playér.
2. Connect a HDMt came to the HDM3 output of your DVD
‘ piayer and the other and to the HDW Input {white color area)
an at the rear of the High Definition TV.
3. Turn on the power to the High Definition TV and DVD
piayer.
4. Select Hi3Mi 1 using the WPUT human on the remote
or side of the High Definitien TV, er disecfiy by pressing the HDMS butter: on the Remote
Centres.
5. Si HDAM 1 is being used, connect so H703»! 2 as me input and foflew steps 1 thrcsugh 3; and
L then select HDMI 2 in step 4.
versign 811 812308 . 19 L
www..V3Zh‘3.com WAD
VIZ687 0011353 V

v:zzo° vw32L HDT\140A User Mama:
a.5.a Far awn P/iayera wrth DUE:
1. 7 Turn off the power to the High Definition TV and DVD player.
2. Using a HDMI-DV! cabla, connect the av: and to you: DVD piayer and the HDM1 and to the
HUM! input (white color area) at the rear of the High Definition TV.
3. Connect an audio cable (‘white and red connectors) to the audio output connectors
associated with the DW output of the DVD player and csnnect the other and to» the audio
connectors by the HDM! input (white area} at the rear of the High Definition HDTV.
4. 7 Turn on the power 20 the High Definition TV and your DVD piayer.
5. Seiect HDMI 2 using the SNPUT button on the remote car side of the High Definition TV, or
directiy by pressing the HDM! button on the Fiemnte.
Note: Refer to your DVD piayer user manna! for mere
infmmatéon about the video output requirements at the product.
Version 81‘! BIEOGB L ~ 20 7
~ wvaw.V!ZiO.¢orn' ~ 7 I .1,’
VIZ687 0011354