VIZULO Premium Eagle User guide

Mounting instruction Montāžas instrukcija M 
08-02-2022
SIA VIZULO
Laucu Lejas, Iecava, Latvia, LV-3913
www.vizulo.com
10
IEC
EN 60598 IP66
198 - 264 V
AC
min
− 40°C
max
+ 50°C
IK09
5
8
1/8
VIZULO Eagle LED ood light | Premium version
4
6
3
20
IK10

Mounting bracket
682
225
534
806
152
Dimensions
Izmēri

Ø21
SCx = 0.23m

2/8
22
20
868

3/5
WARNING!
• Do not touch LED modules!
• Do not put any tools or other items on LED modules!
• In case any LED is physically damaged (example shown below) the warranty is void.
BRĪDINĀJUMS!
• Neaiztikt LED moduus!
• Nenovietot instrumentus vai citus priekšmetus uz LED moduiem!
• Mehānisku LED bojājumu gadījumā (skatīt piemēru zemāk) garantijas apmaia nav spēkā.
!
•    LED !
•    LED     !
•     LED (. )    .
3/8
Acceptable luminaire mounting angle
relative to the ground.
Unacceptable luminaire mounting - light is not
supposed to be directed at luminaire and it parts.
0°
105° -285° 105° -285°
0°
Netto Weight
Neto Svars
 
576
Luminaire Weight (Kg) 41.7
9.2
Driver Box Weight (Kg)
LED count
Maximal wind load with driver box depending to the angle relative to the ground
0° 15° 30° 45° 60° 75° 90°
SCx, m² 0.23 0.36 0.48 0.690.680.640.58

4/8
6
15N
M8
1
3
M12
10
8
-90°...90°
50N
25N
5° step!
5° step!
M6
4a
3
5
M4 M4
15N
*
Driver box may dier
Connection box may dier
4b Mounting hole spacing for mounting the
driver box on a surface
15N
M6
302
160
25N

5/8
6a
Click! Click!
6b
Quick connection
15N
35mm
7mm
Ø min = 8 mm
Ø max = 12 mm
DRIVER
BOX
CONNECTION
BOX
Head nr.1
Head nr.4
Head nr.3
Head nr.2
QQ
QQ
HC
HC
HC
HC
Q - quick connectors, supplied with luminaire
C - can be supplied upon request
HC - head cables, pre-installed
LQ - input line and dimming interface quick connector, supplied with luminaire
*If CONNECTION BOX is not supplied head plugs directly into the driver box
LQ
C
1
2
L
N
DA
DA
3
LN
DA DA
LQ
C
C LQ
LQ
LQ
LQ
5
Wire
7
Number of
wires depends
on head count
20
1.6N
Output
Input
DALI
L N DA+ DA- V1+
V2+
V3+ V1-V2-V3-
NTC
NC
LED3
- +
LED2
- +
LED1
- +
Output
AC
Input DALI
DA-
DA+
15N
134
480
D1&D2
H1
H2
Attach cables according to
the labels inside
D1&D2 - drivers 1 and 2
D3&D4 - drivers 3 and 4
H1...H4 - heads 1-4

LED
Oslon Square
Luxeon 5050
Power
440-2400W
440-2400W
CCT Risk group Remarks
Label required
Label required
Duris S8 440-2400W
Label required
6/8
5
3N
1 Output/DALI/Input cable can
connect up to 4 drivers
For wire connection use terminal block!
L1 L2 DA DA V3+
V2+
V1+ V3-V2-V1-
NTC
DA DA
4
3N
Output
Input
DALI
LED1
- +
LED2
- +
LED3
- +
Output
AC
Input DALI
DA- DA+
DA-
DA+
134
480
3N
Attach cables according to
the labels inside
D1&D2 - drivers 1 and 2
D3&D4 - drivers 3 and 4
L/N/PE/DA+/DA- - supply
D1 & D2
D3 & D4
L / N / PE / DA+ / DA-
MCB/Inrush current table
Standard/High density In-rush current
(peak/dura on) 6A 10A 16A 20A 25A MCB type
Eagle 4 Heads Basic A(2000
s
) 0 0 1 1 2 B,C,D
LED Driver T - 230 Vac
4

7/8
Standard/High density In-rush current
(peak/dura on) 10A 16A 20A 25A 32A MCB type
Eagle 4 Heads Basic A(8000
s
) 0 1 1 1 2 B,C
LED Driver D - 230 Vac
25
Standard/High density In-rush current
(peak/dura on) 10A 16A 20A 25A MCB type
Eagle 4 Heads Basic A(2500
s
) 0 1 1 1 B,C,D
LED Driver E- 230 Vac
40
MCB/Inrush current table
Energy efficiency class of contained light source(s)
E
E
D
D
D
D
E
E
E
E
F
F
F
F
E
E
F
F
Standard
A
B
C
D
E
F
G
1800
2200 E
2500 E
2700
3000
4000
5000
5700
6500
70 80 90
D
D
C
C
C
C
E
E
D
D
D
F
F
E
E
E
E
F
CRI
CCT
Eco
2200
2700
3000
4000
5000
5700
6500
70 80 90
CRI
CCT
E

Terms of use and maintenance
Before luminaire is turned on, it should be mounted according with this mounting instruction or any other applicable regulations.
Mounting instructions
• The warranty of luminaire does not apply, if the mounting of luminaire has been performed in precipitation (rain, snow, hail).
• The warranty of luminaire does not apply, if a control system unauthorized by VIZULO or an inapplicable LED driver has been used
to drive the luminaire.
• The warranty of luminaire does not apply, if it has been used in an unsuitable ambient temperature or has been supplied by
• The warranty of luminaire does not apply, if the LED driver program has been changed in any way.
• The warranty of the luminaire does not apply, if the logged history data of the LED driver has been deleted without the permission
of VIZULO.
up), or it has been completely submerged under water.
Safety instructions
requirements.
To prevent any accidents person installing the luminaire must follow national safety requirements and following instructions:
• The label containing technical parameters of the luminaire has to be studied before the work on it has begun.
• Any luminaire build or design changes are prohibited.
• The luminaire must be used in good technical condition and according with this instruction.
• Only VIZULO authorized spare parts and accessories can be used to repair the luminaire.
Maintenance and repair
Luminaire has to be disconnected from electrical grid before it is opened and/or repaired!
• The person working with the luminaire must follow national regulations and legislations that apply to maintenance and testing of
electrical or electronic appliances.
• The luminaire may need to be cleaned depending on its environment. Only a damp cloth or a sponge may be used to clean the
luminaire. Use only household detergents diluted by water.
• Only VIZULO authorized spare parts may be used for the luminaire.
• Instruction for changing spare parts must be requested from VIZULO and studied before the repair is attempted.
• LED modules, lens and LED drivers can be changed on an installed luminaire, but it is advised to perform this task indoor to avoid
water entering the luminaire.
• Spare parts (lens, LED modules and drivers) should be ordered from the information available on the luminaire label.
Ekspluatācijas uzsākšana
Pirms gaismeka ieslēgšanas, pārbaudīt tā atbilstību pareizai darbībai un veikt uzstādīšanu atbilstoši šīs montāžas un ekspluatācijas
instrukcijas un citiem piemērojamiem noteikumiem.
Montāžas instrukcijas
Veicot gaismeka montāžu, ir stingri jāievēro montāžas instrukcijā iekautā informācija un noteikumi:
• Gaismeka garantija nav spēkā, ja gaismeki tiek montēti nokrišu (lietus, sniega, krusas) laikā.
• Gaismeka garantija nav spēkā, ja tika izmantotas VIZULO neautorizētas vadības sistēmas vai tika izmantots neatbilstošs barošanas
bloks.
• Gaismeka garantija nav spēkā, ja tas tika ekspluatēts neatbilstošos temperatūras un elektrības pieslēguma apstākos.
• Gaismeka garantija nav spēkā, ja ir veiktas barošanas bloku programmas iestatījumu izmaias vai tā tikusi dzēsta neinformējot
VIZULO.
• Gaismeka garantija nav spēkā, ja tikuši dzēsti vai mainīti barošanas bloka vēstures ieraksti.
• Gaismeka garantija nav spēkā, ja tas tika uzstādīts un ekspluatēts neatbilstošos montāžas leos, tika uzstādīts otrādi (ar stiklu uz
augšpusi) vai tika pilnīgi iegremdēts ūdenī.
Drošības instrukcijas
Lai novērstu nelaimes gadījumu rašanos, ievērot valsts drošības noteikumus un šīs drošības instrukcijas.
• Ir jāiepazīstas un jāievēro tehniskie parametri, kas ir norādīti gaismeka marējumā.
• Ir aizliegts veikt gaismeka konstrukcijas un dizaina izmaias.
• Gaismeklis ir jāekspluatē labā tehniskā stāvoklī un atbilstoši šīm instrukcijām.
• Gaismeka remontam ir atauts izmantot tikai VIZULO autorizētas detaas un piederumus.
Apkope, apkalpošana un remonts
Atvienojiet gaismekli no elektrotīkla pirms tā atvēršanas vai veicot remontu!
• Ievērojiet nacionālos noteikumus un valsts tiesību aktus, kas ir piemērojami elektrisko aparātu uzturēšanai, apkalpošanai un
testēšanai.
• Atkarībā no vides apstākiem gaismekli var būt nepieciešams tīrīt. Tīrīšanai izmantojiet tikai mitru lupatiu vai sūkli. Izmantojiet tikai
ierasto sadzīves mazgāšanas šidrumu atšaidītu ar ūdeni.
• Izmantojiet tikai VIZULO autorizētas oriinālās rezerves daas.
• Lai kvalitatīvi veiktu rezerves dau nomaiu, ir jāpieprasa un jāiepazīstas ar VIZULO izstrādātām rezerves dau nomaias instrukcijām.
• Gaismas diodes, lēcas un barošanas bloki var tikt nomainīti uz vietas, bet lai izvairītos no ūdens iekūšanas to ir ieteicams veikt telpās.
• Lūdzu pasūtīt jaunu LED moduli, lēcas vai barošanas bloku, izmantojot informāciju gaismeka marējumā.
8/8