VOCOlinc PM2/E User manual

PM2/PM2E
Smart Power Strip

Product Overview:
1
2
3
4
5
6
PM2/E smart Wi-Fi power strip can be controlled through Wi-Fi wireless network. You
can switch on/off each outlet and monitor its status wirelessly. The built-in power meter
in outlet C(PM2 only) allows you to track power consumption of a specific light or
appliance on the LinkWise APP.
1 x USB Type-A charging port supporting Qualcomm Quick Charge 3.0 (available with
PM2 only);
2 x USB Type-A ports supporting DC5V, with total maximum current of 2.4A. USB ports
are only for charging but not for data transmission or APP control.
Main Power Button Press to turn on/off power supply
Indicates power supply status
Indicates on/off status of each outlet
Press once to switch 3 outlets on/off
simultaneously/Press & hold for about 10
seconds to factory reset PM2/E. After reset,
All connection data will be cleared and
the device needs to be removed and added
back to the app.
For charging only.To enable Quick Charge
3.0, the device being charged needs to
support this function.
When curremt load hits the maximum
capacity, it will trigger overload protection
and cut off power supply. In this case, recover
power supply by manually press the switch
back in.
Main Power LED
Power Status LED
Reset Button/Wi-Fi
Connection LED
USB Ports
Overload
Protection Switch
1

3 independent smart outlets and LED indicators
2 x USB charging ports
1 x Qualcomm Quick Charge 3.0 USB port–(available with PM2 only)
Energy monitoring (outlet C)–(available with PM2 only)
Works with Apple HomeKit
Works with Amazon Alexa
Works with Google Assistant
Can be applied to local or remote control of lights and home electronics
Surge protection
Dual overload protection
Indicator status
Searching Wi-Fi
Adding a device
A device added Successfully
Identifying a device
Connected to Wi-Fi
Disconnected from Wi-Fi
Reset
OTA in Progress
OTA done
VOCOlinc PM2/E
Blinks quickly
Blinks slowly
Blinks slowly 4 times then light on
Blinks slowly 4 times
Light on
Light off
Press & hold for about 10s
Blinks slowly
Blinks slowly then light on
PM2/E Smart Wi-Fi Power Strip
User Manual
What's Included:
Wi-Fi Connection LED Indicator Status
Key Features:
2

3 x Smart AC Outlets
Input: AC100~125V, 60Hz
Output: AC100~125V, 15A Max, 1800W Max (Pure Resistive Load)
Plug directly into electric outlet (not into extension cord)
For indoor use only
Unplug PM2/E from outlet before cleaning
DO NOT clean with liquid
DO NOT remove ground pin (middle pin) as there is risk of electric shock
DO NOT use in wet or damp areas
Keep children away from PM2/E
DO NOT exceed recommended electrical ratings
DO NOT use in precision timing applications where inaccurate timing
could be dangerous (sunlamps, saunas, etc.)
DO NOT use with devices that should not be operated unattendedly.
After switching off the the main power, DO NOT operate until the main
power indicator goes completely off (about 2 seconds delay)
DO NOT use the device when the casing is broken
General use ONLY
Indoor dry location use ONLY
Electrical Ratings
Safety Warnings
USB Ports
2 x USB DC 5V / 2.4A Max
1 x QC3.0 DC 5V / 3A, 9V / 2A, or 12V / 1.5A (PM2 only)
3

VOCOlinc APP
Setup code
Code de Configuration