VOCUS T48 User manual

Continuted on page 2.
Commander Key Phone T48 Quick Installation Guide
The following items are included in your package. If you nd anything missing, contact the Commander Phone team.
PACKAGING CONTENTS
110217 Vocus Commander Key Phone T48 Quick Installation Guide
IP Phone Handset Handset Cord Ethernet Cable Stand
1. Attach the stand, as shown below:
2. Connect the handset and optional headset, as shown below:
Note: The headset and wireless headset adapter EHS36 are purchased separately. The EXT port can also be used to
connect the EXP40 Sidecar module. For more information on how to use the EHS36 or EXP40 Sidecar, refer to the Com-
mander EHS36 user guide or Commander EXP40 Sidecar user guide.
ASSEMBLING THE PHONE
VOCUS.COM.AU
Quick Installation Guide
& Quick Reference Guide
Wireless Headset Adapter
EHS36 (optional)
45

Commander Key Phone T48 Quick Installation Guide
3. Connect the network and power, as shown below, you have two options for network and power connections.
Note: If power is provided over Ethernet (PoE) do not connect the power adapter. Make sure the Ethernetcable and
switch are PoE-compliant.The phone can also share the network with another network device such as a PC (personal
computer). It is an optional connection. Important! Do not unplug or remove power to the phone while it is updating
rmware and congurations.
ASSEMBLING THE PHONE
After the IP phone is connected to the network and supplied with power, it automatically begins with the
initialisation process.
Please allow up to 10 minutes for the phone to connect to Commander’s servers to collect their conguration and any
required updates. The phone may reboot two or three times during this process or after factory default setting is made.
The display will indicate the current status of the operation with ‘initialising’ and ‘conguration updating’. After startup,
the phone is ready for use.
STARTUP
110217 Vocus Commander Key Phone T48 Quick Installation Guide
VOCUS.COM.AU
A
B
A
B
A
B
A
B
A
B
A
B
AC Power Option PoE ( Power over Ethernet) Option
PC Connection
(Optional)
Power Adapter
(DC 5V)
PC Connection
(Optional)
A.
IEEE 802.3af
compliant
PoE Switch
B.