Voda ECLIPSE VECL046 User manual

9 421027 595606
Voda Plumbingware (NZ) Ltd | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
Congratulations on your purchase of this high quality product from Voda Plumbingware.
Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for Mains Pressure only
Minimum Pressure = 150kPa
Maximum operating Pressure = 500kPa
Maximum operating Temperature = 65 deg. Celsius
TOP INLET PLUMBING CONNECTION
For domestic use only.
CONFIGURATION
Mains Pressure systems Install as supplied.
Unequal Low systems This product is not suitable for this type of water pressure.
Equal Low systems This product is not suitable for this type of water pressure.
CONTENTS
• Shower rail (glide bar) with adjuster/handpiece holder
• 1.5m shower hose with flow restrictor disc fitted
• Shower rose
• Shower handpiece
• Wall fixing kit
ECLIPSE Round Double Head Shower
Matte Black
VECL046

596mm
530mm
2
Apply teflon tape
Screw threaded
adapater to wall
outlet then
tighten firmly
with allen key
Voda Plumbingware (NZ) Ltd | Freephone: 0508 367 366 | 5 Hewlett Street, Port Whangarei 0110 | vodaplumbingware.co.nz
ATTACH PROOF OF PURCHASE HERE
4
21 3
5
8mm diameter hole
Shower wall outlet hole
24mm diameter
Position Shower Rail over wall inlet and lower wall
adatpors then gently push into place, then fasten the rail by
tightening the top and bottom grub screws.
OVERHEAD ROSE
HANDPIECE
Rubber washer
6. Turn on water supply. Check for leaks.
Flow restrictor
Push plastic plug into drilled hole.
Position lower mounting adaptor over
the hole and screw firmly into place.
INSTALLATION
Note: This shower has a WELs certified flow restrictor fitted to the handpiece (see diagram 5). If you want a greater
flow, remove this disc but note that this will not give a WELS 3-star water rating anymore.
WARRANTY
Please refer to our website for warranty information: www.vodaplumbingware.co.nz/warranty
In the unlikely event that this product fails during its warranty period, phone our Customer Service team
immediately on 0508 367 366 – as unauthorised removal of the product may void the warranty.
CARE AND MAINTENANCE
Not to be cleaned with astringent, abrasive or citric cleaners.
A so, damp cloth is recommended for cleaning. Mild soap solutions can also be used on occasion.