Vogtec S190TG User manual

USER MANUAL
Fixed Cellular Terminal
S190TG

S190TG User Manual V1.0
Thank you for buying our products.
To reduce the risk of fire, electric shock
and/or personal injury, please read this
manual before using this unit.
=2=

S190TG User Manual V1.0
Contents
1 BEFORE GETTING STARTED.................6
Copyright notice .......................................................6
Use and care..............................................................7
Introduction...............................................................8
2 PARTS CHECKING LIST .........................9
3 FEATURES AND SPEC............................9
Main Features............................................................9
Physical & Environmental......................................10
4. SET UP AND INSTALLATION................11
Inserting a SIM Card into the unit .........................11
Interface Description..............................................12
=3=

S190TG User Manual V1.0
LED/LCD Indications ..............................................12
5 SETTING AND PROGRAM OPERATION16
Setting mode introduces........................................17
Restore Default Setting..........................................17
Control Caller ID Display........................................17
Hardware check ......................................................18
Check the version of software...............................18
Set Speaker Volume................................................19
Set Microphone Gain Level....................................19
GSM Dialing Set (Convert Prefix number)............20
Call limit function....................................................21
Disable SIM card lock.............................................22
Enable SIM card lock..............................................22
=4=

S190TG User Manual V1.0
Disable phone lock.................................................23
Enable phone lock..................................................23
Disable network lock..............................................24
Enable network lock ...............................................24
Disable cell lock......................................................24
Enable cell lock.......................................................24
Command List.........................................................24
6. IMPORTANT NOTES..............................28
7. MAINTENANCE......................................29
=5=

1BeforeGettingStarted
Copyright notice
VOGTEC shall not be liable for any direct, indirect,
consequential or incidental damages about the
use of this equipment, manual or any related
materials.
The information in this technical manual is
advisory in nature and is subject to change.
VOGTEC may make improvements and changes
in the products described in this manual without
notice. Changes will be periodically made to the
information in the new editions. Efforts have been
made to ensure that the contents of this manual
are correct. Should you find any error, VOGTEC
welcomes your comments to improve our
communications. Please contact VOGTEC on
www.vogtec.com
Contents of this manual are subject to change
without prior notice at the discretion of vogtec. co.,
Ltd.
This document has been prepared for the use of

S190TG User Manual V1.0
employees and customers of Vogtec co., Ltd and
may not be reproduced without prior written
approval of vogtec co., ltd.
Use and care
To care for your product, please keep it away
from:
Liquids of any kind
Don’t expose your product to water,
rain, extreme humidity, sweat, or
other moisture.
Dust and dirt
Don’t expose your product to dust,
dirt, sand, food, or other
inappropriate materials.
Extreme heat or cold
Avoid temperatures below
-10°C/14°F or above
45°C/113°F.
=7=

S190TG User Manual V1.0
Cleaning solutions
To clean your product, use only a
dry soft cloth.
Don’t use alcohol or other cleaning
solutions.
Microwaves
Don’t try to dry your product in a
microwave oven.
The ground
Don’t drop your product.
Introduction
This manual is designed to familiarize you with
your GSM router S190TG. To get maximum
benefit from this product, we suggest that you
read the instruction manual carefully. You are
advised to keep the manual safely for reference in
future.
=8=

S190TG User Manual V1.0
You will find that the GSM Router is the most
economical way to route your Mobile / Long
distance calls through the GSM mobile, reducing
your communication cost. We are sure you will be
satisfied with its performance.
2PartsCheckingList
GSM Router 1
Adaptor
(outputDC12V) 1
Antenna 1
User’s Manual 1
3 Features and SPEC
Main features
1. Remote programming
2. GSM line supporting area code or IP number
dialing
=9=

S190TG User Manual V1.0
3. Four band 850/900/1800/1900 MHz auto
compatible.
4. 12V DC operated (can be connected to a
7.5V truck battery).
5. 48V line voltage (suitable for all types of
PABX and billing machine).
6. RJ-11 socket for easy interface with any kind
of PABX system.
7. FSK or DTMF Caller ID.
8. Outgoing calls limit.
9. Phone lock/ SIM card lock/ Network lock/ Cell
Lock.
Physical & Environmental
Desktop
Power Input: 220 to 230 ACV / 50/60Hz 12V DCV
1000mA
Dimensions: 185 x 13 x 41mm
Weight: 470g (main unit)
Ambience temperature: -10℃～+45℃
Relative humidity: 10%～95%
Air pressure: 86～106Kpa
=10=

S190TG User Manual V1.0
4.SetupandInstallation
Inserting a SIM Card into the unit
You may prepare your SIM card in a GSM phone
prior to inserting it into the unit. Ensure that the
SIM card PIN facility is disabled.
If the SIM Card is working with the phone, it is
ready for use in the unit.
If unit can not login, error code will display on
telephone LCD, and please refer to error code list
at the following of this manual.
If the SIM has been locked, unit will report 000002
error codes at the LCD of phone. Then pick up the
handset and input the pin code, if the pin is correct,
it will make a “Bee” tone and then register the SIM.
If the pin is error, it will make a “Di-Di-Di” tone and
need input the pin again.
If you wish to protect the SIM card inserted in the
unit, please refer to the GSM features at the
=11=

S190TG User Manual V1.0
appendix.
Interface Description
PHONE: Connect a Caller ID Telephone
instrument to this connection.
DC12V: Connect the power adapter output to this
connection.
ANT: Connect the antenna to this connection.
LED/LCD Indications
Insert the SIM card in the SIM card holder provided
at the bottom of the router, connect the power
supply, connect the antenna and then switch on the
UNIT. The LEDS will glow.
=12=

S190TG User Manual V1.0
The signals of LEDS are as following:
All LEDs
glow and
roll then
flash
This means that the UNIT is
initializing the software and login the
network
the signal
LEDs
glowing
This means that the UNIT is working.
The number of signal LEDs glowing
indicates the signal strength.
Network
LED
flashing
This means the UNIT is at standby
mode
Network
LED
glowing
This means that the UNIT is in using
and the number is being dialed.
GSM LED
glowing This means that the GSM line is in using.
PSTN LED
glowing No use for S190TG
1-7 LEDs
glowing This means that the initialization has failed and the number of LEDs
glowing stands for the code of error.
In this case the error code will be
=13=

S190TG User Manual V1.0
sent to the telephone instrument
connected to the UNIT in form of
digital code.
While UNIT is connected to a phone the following
error codes will be displayed on phone LCD:
Code Explanation Solving method
1
Cannot check
SIM
Display:
000001
Please check whether
SIM card is inserted
properly or not.
2
PIN code
request is
activated
Display:
000002
Please feed the correct
PIN code (in most of the
cases the default PIN is
1234 until it has been
changed). The SIM will
be locked after feeding
incorrect PIN for 3 times.
3 SIM is locked Display:
000003
Please feed the correct
PUK number to unlock
the SIM. PUK number
=14=

S190TG User Manual V1.0
can be obtained from the
GSM service provider.
4
Incorrect SIM
or can not
register in
specified
network
Display:
000004
Please check the SIM
and contact the GSM
service provider. Please
insert the SIM in any
normal mobile phone
and check whether it
works there.
5
Failed to
initialize.
Caller ID:
000006
Switch off the UNIT and
restart.
6 The UNIT is
locked display
000008
Please insert the correct
SIM card to use or
unlock the UNIT
7 The network is
locked display
000009
Please insert the correct
network SIM card to use
or unlock the UNIT
8 The cell is
locked display
000010
Please use the UNIT in
correct cell or unlock the
UNIT
=15=

S190TG User Manual V1.0
NOTE: If the UNIT continues to mal-function contact
our customer care centre to get on-line help.
5SettingandProgramOperation
Setting mode introduces:
1. Only get in the setting mode can program the
UNIT.
2. The get in the setting mode way: pick up the
phone of the UNIT and then input code “**#”, then
can hear “Bee”. This is in setting mode. And in this
mode, you can only program the UNIT, can’t make a
call.
3. The exit setting mode way is: hang up.
4. In the setting mode, one signal LED (the lowest
signal LED) grows. To notice the user he is in
setting mode.
In setting mode input the others program code to
program UNIT, it will have another one signal LED
grow. To notice the user he is in the program mode.
=16=
5. In program mode, if the program code is correct it

S190TG User Manual V1.0
will make “Bee” tone, if error it make “Di-Di-Di”.
6. in program mode. After input a program code, if
you want to continue do program without exit to the
standby mode. Then press “*#” can exit the program
mode to setting mode.
UNIT phone operate: “program mode”-Æ*#Æsetting
mode-Æ*#Æstandby mode”
For example: pick up the handle input **#
**34#0000#. You can hear **# (“Bee”) **34#(“bee”)
0000# (“bee”).
Restore Default Setting
This command can be used to delete all the
programmable settings and restore default
factory settings.
Program code: **00#
Control Caller ID Display
Display FSK caller ID (Default): **14#1#
Display DTMF caller ID: **14#2#
=17=

S190TG User Manual V1.0
Deactivate Incoming Caller ID: **14#0#
Default is DTMF caller ID display
NOTE:
If set **14#0# when the GSM number of UNIT has
an incoming call, it will not display the caller ID.
Hardware check
Check IMEI Number
Program code: **06#
Key in **#**06# via caller ID phone and then hang
up, UNIT IMEI number will display on phone LCD.
Example: 5260663, it is the IMEI number.
Check the version of software
Program code: **01#
Key in **#**01# via caller ID phone and then hang
up, UNIT software version number will display on
phone LCD.
=18=

S190TG User Manual V1.0
Set Speaker Volume
This command can be used to change the speaker
volume when talking.
Program code: **11#LEVEL#
LEVEL: integer value with specific range 0-100
Default: 90
Set Microphone Gain Level
This command can be used to change the microphone
gain level when talking.
Program code: **12#0*GAINLEVEL#
GAINLEVEL: integer 0 0dB
1 +1.5dB
2 +3.0 dB
3 +4.5 dB
4 +6.0 dB
5 +7.5 dB
6 +9.0 dB
7 +10.5 dB
8 +12.0 dB
9 +13.5 dB
10 +15.0 dB
=19=

S190TG User Manual V1.0
11 +16.5 dB
12 +18.0 dB
13 +19.5 dB
14 +21.0 dB
15 +22.5 dB
Default: 3
GSM Dialing Set (Convert Prefix number)
This Function can be used to convert the prefix
numbers. Max is 50 sets for GSM line only.
In this operation the first few digits can be replaced
by other digits as desired. e.g. while dialing
9522-27563637 it can be converted to
022-27563637.
Program code : **22#NUMBER*REPLACE TO#
NUMBER: This is the prefix number which is to be
replaced by another number; this can be up to 8
digits.
REPLACE TO: This is the number which is to be
=20=