Void STASYS X User manual
STASYS X
OWNER'S MANUAL
STASYS X
OWNER'S MANUAL
Features
Close tolerance and durable woofers provide increased reliability and greater output.
HTT (heat transference technology) maintains low power compression.
Accurately machined 15 laminate birch plywood cabinets for superior strength.
Four rear wheel mounting points for 100 mm wheels.
Tough kick proof grills with foam filters protect the components from the heaviest of abuse.
Three year warranty and guarantee.
System Connections
Stasys X's speakon connectors are wired in parallel, so either speakon can be used as the input.
The other speakon can be used as a link output.
A positive signal to the + pin gives a forward cone movement on the Stasys X enclosure.
The Stasys X enclosure contains two 8 ohm woofers connected in parallel. The nominal load is 4 ohms.
Precautions
Please consider the following precautions during use :
1. Install the Stasys X enclosure in a dry environment, do not expose the cabinet to rain or moisture.
2. The Stasys X enclosure contains very powerful magnets. Do not locate an enclosure near any
sensitive equipment such as: VDU monitors, TV's or high gain preamplifiers.
Stasys
Page 4 Reference Manual
TECHNICAL SPECIFICATIONS
Frequency Response :
33 Hz - 200 Hz -3dB points
Sensitivity :
LF : 105 dB 1w/1m
Impedance :
4 ohms
Power Handling :
2800 watts Rms
Maximum Output :
138 dB cont
142 dB peak
Dispersion :
Array Dependent
Crossover Point :
Hi Pass : 30 Hz - 24 dB/oct But
Lo pass : 110 - 138 Hz - 24 - 48 dB/oct But/LR
Driver Configuration :
2 x 18" - 125 mm voice coil - neo
Protection :
N/A
Rigging, Mounting :
N/A
Construction :
18 mm 15 laminate plywood
Finish :
Textured polyurethane
Grill :
Perforated steel - foam filter
Connectors :
2 x 4 pole speakon
Dimensions :
1220 mm wide
636 mm high
820 mm deep
Weight :
94 Kg net
105 Kg shipping
Stasys X
TM
