VOLO Grasper User manual

Grasper
X1
Upper ring
Lower ring
M3 Allen Key X1
M4 Allen Key X1
Spacer X2 Spacer X2
MATCHING BAR DIAMETER:
23.5~27 mm (with ΦA 25.4 mm spacer)
30~34.5 mm (with ΦA 31.8mm spacer)
Net Weight:80g
Color:
TM PRODUCT FORMATION FITMENT CHECK
Phone:[phone]
Fax:[phone]
E-mail @volo.hk:info
VOLO BIKE PRODUCTS INC
http://www.volo.hk
X1

According to
the diameter of
your handlebar,
choosing right
size “Spacers”
then place
them in right
position.
Screwing
“Upper ring” &
“Lower ring”
together tightly,
make sure it
locked well with
handlebar.
Screwing the
“Grasper” into
the rings from
the top by M3
Allen Key.
You can place
your phone into
the “Grasper”
and adjust the
tightness by
rotating the
knob.
Loosen the
screw of stem
cap and
remove it.
Mount the
“Grasper” onto
the headset
cap with M6
screws by M4
Allen Key
You can place
your phone into
the “Grasper”
and adjust the
tightness by
rotating the
knob.
Grap your phone onto the stem.
Grasp your phone onto handle bar Grap your phone onto the stem
Material: Aircraft Grade Aluminium, Steel
Magnetic Force: 3500 Gs
Matching Size (smart Phone): 3"(5.5 × 8.4 Cm)~6"(15.2 × 10.2 Cm)
Max Loaded Weight: 500 G
Warning: This product has been designed for using your phone in stable condition such as City Road Cycling on smooth to
mostly smooth road.We do not recommend using it in strenuous exercise such as off road, mountain or bumpy track riding.
60- 105m m
WARNING