Volt VFLE-12V Series User manual

Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
VOLT®Low Voltage Landscape Lighting
LED Floodlights
VFLE-12V Series

VOLT®Low Voltage Landscape Lighting
VFLE 12V Floodlights
INSTALLATION & MAINTENANCE GUIDE
www.voltlighting.com
–2–
Important: Please Read Before Installation
IMPORTANT SAFETY INSTRUCTIONS
This luminaire is intended for installation in accordance with local codes and the
National Electric Code (NEC). Failure to adhere to these codes and instructions may
result in serious injury, property damage and void the warranty.
These instructions do not intend to cover all variations in installation, operation
maintenance or mounting situation.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or more
from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply (transformer) rated
maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with wire connectors that is suitable for outdoor
use.
5. Position the low voltage wire and wire connector so that it is located within 6
inches (15.2 cm) from a building structure, a luminaire or tting.
6. The main low voltage cable is intended for shallow burial - less than 6 inches (152
mm)
7. If additional lengths of low voltage cable is required, please contact www.
voltlighting.com or call 1-813-978-3700.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage
lamp.
6. Do not operate the luminaire tting with a missing or damage shield.
SAVE THESE INSTRUCTIONS
!
!

[e-mail] • 813.978.3700
–3–
–2–
Package Contents
A. (1) Lampbody
Products Model #
Model Input
Voltage
Power
Factor Watt Input Current Finish Mounting
VFL-10WW-12V-YBZ 12V ≥0.95 12W 0.15A Bronze Yoke
VFL-30WW-12V-YBZ 30W 0.52A Bronze Yoke
Product Dimensions
0.16” - Ø 0.26”
Ø 0.85”
1.81”
2.36”
4.49”
4.80”
2.76”
3.15”
4.67”
VFL-10WW-12V-YBZ VFL-30WW-12V-YBZ
8.03”
5.99”
9.13”
8.64”
4.76”
8.00”
5.36”
7.32”
0.20” - Ø 0.40”
Ø 0.91”

VOLT®Low Voltage Landscape Lighting
VFLE 12V Floodlights
INSTALLATION & MAINTENANCE GUIDE
www.voltlighting.com
–4–
Adjust the xture to desired
orientation; tighten the screws.
Strip two leads from xture
pigtail. Using two wire
connectors, sold separately,
connect leads from xture to
main low voltage supply cable
leads.
Step 1
1
Use expansion bolts to secure
the xture to mounting surface.
Allow enough wire for adjusting
xture.
Connect wires into wiring
terminal; white wire to
“Neutral” terminal, black wire
to “Live” terminal, green wire to
“Ground” terminal; and x them
by screws.
Step 2
2

[e-mail] • 813.978.3700
–5–
–4–
After installation, please
A. check whether the lighting xture is rmly xed.
B. check whether wires are connected correctly.
At last, turn on the power, and check if the lighting xture works well. If not,
please turn off the power and contact with local dealer.

Specications and product details subject to change without notice.
© Copyright 2014, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3700
www.voltlighting.com
Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
is-VFLE-12V-ver1.pdf