Voltera V-ONE DRILL User manual
For consumables and replacement parts, please contact our sales team or visit our online store:
For technical assistance, please reach out to our technical support team:
sales@voltera.io
support@voltera.io
voltera.io/store
voltera.io/support
3
Table of Contents
4
•
•
•
•
5
• Front • Back
6
•
•
•
•
•
•
•
•
8
•
8
• •
Safety
substrates.
4
Spinning Motor
Wear Eye Protection
Sharp Tools
Dust Hazard
5
Drill Anatomy
1
2
3
Front
1.
3.
Back
1.
12
1.
•
•
•
6
Using the Drill
Application: Visit support.voltera.io/desktop-application
drill bit chuck.
Setting Up the Drill
Mount the Sacrical Layer
Changing Drill Bits
1.
socket outlet.
3.
4.
5.
6.
Changing a Drill Bit
1.
3.
1
2
3
Note:
Removing the Drill
Third Party Drill Bits
Maintenance
1.
3.
4.
Inspect Drill Bits Before Use
Cleaning
Replacement Power Cable
Mains Voltage 100-120 VAC 200-240 VAC
Length >= 1,8 m
Ratings
Termination
Maximum Speed
Maximum Drill Bit Length 38.1mm
Maximum Drill Bit Diameter
Maximum Dimensions
Weight
Environmental Conditions
Operating Temperature
Maximum Altitude
Relative Humidity 80%
Pollution Degree
Power Requirements
Other Equipment
8
V-One Drill Technical Specications
or contact suppor[email protected]
Hardware
Consumables & Accessories
voltera.io/store
purchase additional consumables.
support@voltera.io.
•
•
•
•
•
•
•
•
•
For consumables and replacement parts, please contact our sales team or visit our online store:
For technical assistance, please reach out to our technical support team:
sales@voltera.io
support@voltera.io
voltera.io/store
voltera.io/support
Table of contents
