10
M3903273
Installing, the keypad for the cruise control
Applies to all cars
Insert the new keypad for the cruise control into the grooves until
the catch engages
Install the screw. Tighten the keypad
Connect both the connectors to the keypad.
11
Reinstall the horn. See point 5. Ensure that the three springs are
positioned correctly. Check that the ground lead is not trapped
Tighten the screws crosswise. Tighten to 6.5 Nm (5 lbf. ft.)
Reinstall the ground lead using the screw. Tighten the ground
lead
Connect the connector for the horn and the keypads
Check the function of the horn. Press the horn all the way
around its circumference. (A metallic noise should be heard).
12
M6400669
Check that the two springs (1) are in position
Connect the two connectors for the ignition cables for the
steering wheel module
Insert the two pins on the reverse of the steering wheel module
in the two springs. Ensure that the ignition cables are not
trapped
Press the steering wheel module into the mountings (two clicks
should be heard).