VR3 VRBT200V User manual

VRBT200V
Hands-Free Car Kit
Dear Customer,
CONGRATULATIONS. The VRBT200V Bluetooth®Hands-Free Cell Phone Car Kit al-
lows the driver to make voice calls hands-free via their Bluetooth®mobile phone. When
used as described, the VRBT200V will give you years of dependable service in your car,
truck, RV, or mini-van. We have taken numerous measures in quality control to ensure
that your product arrives in top condition and will perform to your satisfaction. In the
rare event that your VRBT200V Bluetooth®Hands-Free Cell Phone Car Kit contains a
damaged or missing item, does not perform as specied, requires warranty service, or
you have an installation problem, DO NOT RETURN THIS PRODUCT TO THE STORE.
PLEASE CALL OUR TOLL FREE NUMBER FROM THE U.S.A. AND CANADA 1-800-
445-1797 and ask to speak with a member of our technical service team; or submit your
questions via our web site www.vr-3.com and a member of our technical service team
will respond by e-mail to your questions. Our in-house technical service team will expe-
dite delivery of your part, advise you on installation, or help troubleshoot a problem with
you. If your product needs warranty service, our technical service team representative
will help you obtain the fastest remedy possible under the warranty.
Features & Functions
Speaker
Adjustable LCD Screen
3-Way Button
Mini USB Port With Cover
Top View Of Unit
Headphone Jack
Three Way Button
Cancel Button
WARNING: The user MUST read the instructions in full, and operate the VRBT200V
with a cell phone before using in the car.
Multi-function Button
12 Volt Adaptor With Mini Usb Plug
Earbud
IMPORTANT INFORMATION & PRODUCT MAINTENANCE
• Store in a cool, dry place; use clean soft cloth to clean the surface of Bluetooth® car kit.
• Do not expose to high or extremely low temperatures, or to dust.
• Do not open VRBT200V. Non-professional maintenance may cause damage, and will void the warranty.
• Do not operate the VRBT200V roughly, e.g knocking, bumping.
• Do not short circuit the charging port of the VRBT200V; a short circuit will cause damage to the battery.
• Use original accessories Only; any damage caused by using other accessories will void the warranty.
• If VRBT200V does not turn on, please recharge the battery.
Visor Clip

Operation
INSTALLATION
To install the VRBT200V attach to the visor of your vehicle using the clip on the rear of
the unit.
CHARGING
Insert the mini USB connector of the charging adaptor into the mini USB charging port
of VRBT200V, then insert the 12 Volt adaptor end into the vehicle’s cigarette lighter
socket or 12 Volt Power Port. If the unit is ON, it will automatically shut OFF when you
start charging, and the Red LED will come on to indicate the unit is charging. When the
VRBT200V is fully charged, the Red LED will go off.
LOW BATTERY WARNING
When the VRBT200V battery is low, the Blue LED will be off, and the Red LED will ash,
and the speaker will make a BEEP sound.
POWER ON AND OFF
Press and hold the Multi-Function Button for 3 seconds to turn the VRBT200V ON.
There will be a short BEEP and the cancel button will ash blue. When the VRBT200V is
in standby mode, press and hold the Multi-Function Button for 3 seconds to turn the unit
off. You will hear a long BEEP, and both LED lights will turn off.
MULTI-FUNCTION BUTTON
POWER - Press and hold for 3 seconds.
PAIRING - Press and hold for 6 seconds
ANSWER A CALL - Press once
RE-DIAL - Press two times or more, depending on your phone’s features.*
VOICE ACTIVATED DIALING - Press Once*
CALL TRANSFER - Press once to transfer to VRBT200V
Press and hold for 3 seconds to transfer to cell phone
MUTE - Press and hold for 3 seconds
THREE WAY BUTTON
VOLUME - Move the 3-Way button to the right to increase, or move the 3-Way button
to the left to decrease.
CALL WAITING* - With a call in progress you will hear 2 short tones, then:
1. Press and hold the 3-Way button to the right for 3 seconds to put the current call on
hold and answer the waiting call.
Note: To cancel the second call and return to the “call on hold”, press the cancel but-
ton once.
2. Press and hold the 3-Way button to the left for 3 seconds to cancel the current call
and answer waiting call.
MUTE - Press and hold for 3 seconds to Mute or Unmute.
ENTER CALL LOG BOOK - Press Once
TO CHOOSE A CALL LOG BOOK - Move to Left or Right
CANCEL BUTTON
END CALL - Press Once
REJECT CALL - Press Once
EXIT CALL LOG BOOK - Press Once
PAIRING WITH A BLUETOOTH®ENABLED CELL PHONE
1. The VRBT200V and the Bluetooth®enabled cell phone should be within a distance of
3 feet (1 meter).
2. With the VRBT200V OFF, press the Multi-Function button for 6 seconds. The Red &
Blue LEDs will ash alternately and the speaker will make a long BEEP sound.
3. The Bluetooth®cell phone will search for nearby Bluetooth®devices. The cell phone
will display the “VRBT200V” in the list of Bluetooth®devices. If you are using a “dongle”
type Bluetooth®adaptor, follow the manufacturers’ instructions for that device.
4. Select “VRBT200V” to add this Bluetooth®device into the list of paired devices.
5. Enter in the PIN Code “0000” and your mobile phone will show that pairing is complete.
6. If pairing is successful, user will hear a long BEEP and the Blue LED will ash about
every 3 seconds.
CALLER ID DISPLAY
The LCD will ash ON & OFF while displaying the phone number of the incoming call. On
the rst screen, the rst ten digits will be displayed, the rest of the digits will be displayed
on the last screen.

©2006 Virtual Reality Sound Labs® U.S and Foreign Patents Pending. All designs, logos and images are the exclusive property of Virtual Real-
ity Sound Labs® and/or its affiliates. All rights reserved. 072406 Printed in China 00000
CALL LOG BOOK
Note: The Call Log Book feature DOES NOT access the cell phone’s Call Log Book.
1. Press the 3-Way button once to enter the Call Log menu. The three call log categories
are: Missed Calls -> Dialed Calls -> Received Calls in that order.
2. Move the 3-Way button to the LEFT or RIGHT to navigate the three logs.
3. Press the 3-Way button once to enter the each log.
4. After you enter a Call Book Log, move the 3-Way button to the LEFT or RIGHT to navi-
gate through the phone numbers.Press the Multi-Function Button to call the highlighted
phone number.
5. Press the Cancel Button to quit the Call Log Book.
CALL LOG DISPLAY
Within the Call Log Books, each number is preceded by a single digit number (0-5) and
a space to designate the order of the calls. “0” is the most recent number; “1” is the next
number and so on, up to “5”.
The rst screen will show the rst eight digits of the logged number. E.g. The number
“7325551212” is displayed as follows: First screen: “0 73255512”; Second screen: “0 12”.
RECONNECT TO CELL
1.If the VRBT200V loses connection by moving out of operating distance of the paired
cell phone, reconnect by moving it within the operating area and press the Multi-Function
button once to reconnect to the cell phone.
2. If the VRBT200V is disconnected because of being powered off, it will connect auto-
matically after powering on again.
STORAGE CONDITONS
Operating Temperature Range 0°C to +50°C (32° to 122°F) without loss of function.
Storage Temperature Range: - 20°C to +65°C (-4° to 149°F) without any damage.
Humidity Range: 30%-90% humidity
EARBUD
Insert the earbud’s plug into the headphone jack on the side of the VRBT200V.
Use the Earbud for privacy or high ambient noise situations.
*Note: Please refer to your cell phone’s product user manual for Voice Dialing, Call &
Redial functionality and settings.
ICONS
Operation
When the VRBT200V
completes a Bluetooth®
connection, the Bluetooth®
icon will be on.
When opening the Call
Logs, the Call Log Book
icon will be on.
When there is an incoming
call, the Incoming Call icon
will be on while the backlit
LCD flashes
The Missed Call icon will
be on when a call is missed
and until that call is ac-
knowledged.
When checking a phone
number in the Missed Call
Log, the Missed Call icon
and the Phonebook icon
will be on.
A solid Battery Power Level
Icon will display when the
battery is full; One line on
Battery Power Level icon
will display when the bat-
tery is half full; only the bat-
tery frame will remain when
the battery is discharged.
When entering the Re-
ceived Call Log, the Re-
ceived Call icon on the
LCD and the Call Log Book
icon will be on.
When entering the Dialed
phone numbers in the
Phonebook, the Outgoing
Call icon on the LCD and
the Call Log Book icon will
be on.