VS Sassoon THE EASY TRIM Assembly instructions

TOOL TIPS
THEEASYTRIM
for the detail trimming kit
for your nose, ears & facial hair.
VSM163NA

2
HEY YOU!
TAKE A BOW FINE SIR.
THINGS ARE LOOKING UP
& YOU’VE JUST MADE A
QUALITY PURCHASE
WITH THIS NEW GROOMING TOOL.
WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO
USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS
TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.
HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION.

3
THE EASY TRIM / TOOL TIPS

THE EASY TRIM / TOOL TIPS
4
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety instructions should always be followed, including the following:
Polythene bags over product or package may be dangerous. To avoid danger
of suffocation, keep this wrapper away from babies and children. This bag
is not a toy.
DANGER: When the unit is used in a bathroom, remove the battery
after use since the proximity of water presents a hazard even when
the appliance is switched off.
WARNING: Do not use or leave the trimmer in a position where it can become wet
or there is a danger of it falling into a basin or other vessels containing water.
Keep the appliance dry, unless it otherwise specified. Do not use this appliance
in or near bathtubs, showers, basins or other vessels containing water.
- Do not immerse appliance in water or other liquids.
- Do not reach for an appliance that has fallen into water.
- Take care to avoid contact between the moving blades of the unit and the
skin, paying particular attention to the face, neck and hands.
- This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the
appliance.

5
THE EASY TRIM / TOOL TIPS
IMPORTANT: Always ensure the appliance is switched off when not in use or
before cleaning. Do not leave unattended when switched on. Do not place on any
heat sensitive surface.
- Do not use any attachments other than those supplied by
Conair Australia Pty Ltd.
- Use this appliance only for its intended use as described within this
instruction booklet.
- This appliance is not intended for commercial use.
- Never drop or insert any object into an opening.
- Do not use the appliance with damaged or broken attachment combs
or with any teeth missing from the blades, as injury may occur.
- Do not place on any surface while it is operating.
- Do not use outdoors or operate where aerosol (spray) products are being used
or where oxygen is being administered.
- Do not use the appliance if it is damaged. In the event of damage, discontinue
use immediately and contact your dealer for instructions on returning it for
examination or exchange.

6
THE EASY TRIM / TOOL TIPS
1. Diamond sharpened blades
2. 20mm trimming blade
3. Linear trimming blade
4. Rotary blade
5. Removable washable blades
6. Dual length comb guide
for precise trimming of
your neckline, sideburns &
eyebrows
7. 5 position comb guide (2mm
to 10mm) for crafting a short
stubble look, or keeping
your beard in top shape
8. Storage stand
9. 1xAA battery
10. Beard & moustache comb
11. Cleaning brush
THE EASY TRIM
BRAVO. YOU’VE MADE A QUALITY PURCHASE.
The Easy Trim is the detail trimming kit for your nose,
ears & facial hair.
1
5
3
611
8
4
10
9
7
2

7
THE EASY TRIM / TOOL TIPS
PREPPING YOUR
NEW TOOL
INSERTING THE BATTERY
- To insert the AA battery, first ensure that the trimmer is
switched off, then remove the battery compartment cover at
the back of the appliance by pulling straight down.
- Align the AA battery with the positive and negative positions
indicated inside the battery compartment. Being careful not
to bend the clips, insert the negative end of each battery first
so it will slip easily into position.
- If the appliance remains unused for a while or if the battery
has run down, remove from the appliance. This will increase
the life of the trimmer.
- After inserting the battery, replace the battery compartment
cover to its original position by pushing it in and up until it clicks into place.
- Always purchase the correct size and grade of batteries most suitable for
intended use.
- Clean the battery contacts and also those of the appliance prior to battery
installation.
- Ensure the batteries are installed correctly with regard to polarity (+ and -).
- Exhausted batteries are to be removed from the appliance and safely
disposed of.
- When the battery has run down, they should be disposed of at a recycling
centre to safeguard the environment. If the batteries leak avoid touching
them and dispose of them at a recycling centre.
- Non-rechargeable batteries are not to be recharged.
- Store unused batteries in their original packaging, away from metal objects
that could short-circuit them. Never short-circuit batteries.
Fig.1
Fig.2 Fig.3
(Fig.4)
Fig.5
(Fig.6)

THE EASY TRIM / TOOL TIPS
8
BEFORE USING
- Always inspect the trimmer blades for noticeable signs of damage.
- Always inspect the trimmer blades before use to ensure they are free from
hair, debris etc.
- Ensure the AA battery is correctly inserted before use.

9
THE EASY TRIM / TOOL TIPS
CHANGING THE TRIMMING BLADES
Hold the handle of the trimmer while turning the trimmer head counterclockwise until
the “I” mark is aligned properly with the “arrow” mark (Fig. 2).
At this point you should be able to easily lift the nose/ear trimmer head from the
handle. To use a new trimmer head on the u nit, properly install the head into position
making sure the “I” mark is aligned with the “arrow” mark, turn clockwise until the “I”
and “circle” marks are aligned (Fig. 3) and lock into position.
Fig.1
Fig.2 Fig.3
(Fig.4)
Fig.5
(Fig.6)
2. Insert 1xAA alkaline battery, negative end rst, into the battery
compartment. (Alkaline batteries will ensure the best performance
and longest life for your appliance). If you are not going to use the
unit for a long period of time, or if the battery has run down, remove
the battery from the unit. This will increase the life of your trimmer.
3. To replace the battery compartment cover, line up the small mark
located on the bottom section of the trimmer with the spot and push
the bottom section onto the top section as far as it will go. Twist the
bottom section of the trimmer in a clockwise direction until it locks into
place, a soft click will be heard.
Switching the Trimmer Heads
1. Ensure that the trimmer is turned off before switching the heads.
2. With the trimmer head in the locked position hold the handle of the
trimmer and turn the trimmer head anti-clockwise until the line on the
top section lines up with the beginning of the arrow. (Fig.1)
3. Lift the trimmer head from the handle.
4. To replace the trimmer head align the line on the top section with the
beginning of the arrow . Push the trimmer onto the handle. Turn in a
clockwise direction until the line is aligned with the spot on the handle.
Note: make sure the motor spindle is in the actuator arm after
reassembling the head (Fig. 3)
Fig. 3
Motor spindle in actuator arm
7040DU IB-12/156.indd 5 4/10/12 3:55 PM

THE EASY TRIM / TOOL TIPS
10
TRIMMING TIPS
Hit up www.vsformen.com.au for more grooming tips & inspiration.
USING THE 20MM TRIMMING BLADE
The 20mm trimming blade has been designed for stubble, beard & moustache
trimming + shaping.
The 5 position comb guide (2mm to 10mm) can be used with the 20mm trimming
blade for crafting a short stubble look, or keeping your beard in top shape.
The 20mm trimming blade can also be used without any comb guide attached to
outline, and for an even closer finish.
Using the 20mm trimming blade to outline
The 20mm trimming blade without a comb guide attached will cut roughly to a
length of 0.5 mm.
1. Do not attach a comb guide.
2. Hold the trimmer upside down with the blade facing downwards, yet flat
against the skin.
3. Move the trimmer gently downwards in small strokes around the edge of the
area you wish to outline.
4. Having defined the outline, hold the trimmer with the blades pointing
upwards, yet flat against the skin and move the trimmer upwards against
the direction of hair growth. This will trim the unwanted hair adjacent to the
outline.
BE CAREFUL NOT TO APPLY EXCESS PRESSURE
TO THE BLADE, AS THIS MAY DAMAGE THE BLADE
AND CAN RESULT IN INJURY TO THE SKIN DURING
TRIMMING.

THE EASY TRIM / TOOL TIPS
11
Using the 20mm trimming blade with the 5 position comb guide
1. To attach the 5 position comb guide, slide the comb guide onto the front of
the 20mm trimming blade and push down at the rear to lock into place – you
will hear a clicking noise when it’s in position.
2. The comb guide has 5 length settings, 2mm, 4mm, 6mm, 8mm & 10mm. To
adjust the cutting length, push the button and click the comb guide forward
to the required position.
3. Select the required cutting length setting (2-10 mm). If you require more than
one cutting length, start with the longest length first.
4. Switch the trimmer on.
5. Hold the trimmer with the teeth of the trimmer pointing upwards, yet flat
against the skin.
6. Move the trimmer upwards and outward through the hair, against the
direction of hair growth.
7. The trimmer will work most efficiently when cutting through hair at its own
speed.
8. Never switch the appliance off whilst in the hair.
9. To remove the 5 position comb guide, gently lift the guide off the head by
lifting the rear section.

THE EASY TRIM / TOOL TIPS
12
USING THE LINEAR TRIMMING BLADE
1. Attach the linear trimming blade.
2. Switch the trimmer on by sliding the On/Off switch upwards so that the “I”
marking is visible.
3. Place the trimmer at a slight right angle to the skin and trim in the direction
of hair growth. It is suggested to trim the hair in the direction of hair growth,
as trimming against the direction of growth could cause a rash or irritation.
4. Pull the skin firmly with one hand during the trimming process to ensure the
closest trim possible.
5. Move the trimmer slowly and carefully, so as not to cut any hair you do not
intend to trim.
6. Trim, shape and define your facial hair as needed.
NOTE: Be careful not to apply excess pressure to the blade, as this may damage
the blade and can result in injury to the skin during trimming.
USING THE ROTARY BLADE
1. Attach the rotary trimming blade.
2. Switch the trimmer on by sliding the On/Off switch upwards so that the “I”
marking is visible
3. Insert the trimmer into the nose or ear and gently move the trimmer in a
circular motion.
4. Always turn the trimmer on BEFORE you insert into your nostril or ear canal
to avoid painfully snagging hairs.
5. Never insert the trimmer more than 5-6mm into your nose or ears.
6. Never turn the trimmer off whilst in the nose and ears.

13
THE EASY TRIM / TOOL TIPS
TRIMMER CLEANING &
MAINTENANCE
Because the trimmer blades are precision made for a very special
use, they should always be handled with care. To ensure long-lasting
performance of your trimmer, it is important to clean the blades after
every use.
The blades are washable for easy cleaning.
To remove the trimming blade, follow the instructions at CHANGING
THE TRIMMING BLADES.
1. First, take a small brush and brush away any loose hairs that have
collected in the blades.
2. Rinse the trimming blades under running water (Fig. 4).
3. For proper functioning of the trimmer, the handle
cannot touch or be immersed in water.
4. After cleaning, make sure to shake off excess water and dry the heads of the
trimming blades before replacing onto the handle.
To clean the handle of your Easy Trim, simple wipe with a cloth that
has been dampened in water and mild detergent.
NEVER IMMERSE THE HANDLE OF THE TRIMMER IN
WATER.
Fig.4

THE EASY TRIM / TOOL TIPS
14
LIMITED TWO
YEAR WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure. In New
Zealand our goods come with a guarantee that cannot be excluded under the
Consumer Guarantee Act 1993.
Conair Australia Pty Ltd. will repair or replace (at our option) your appliance
free of charge for twenty-four months from the date of purchase if the appliance
is defective in workmanship or materials.
This warranty is an additional benefit and does not affect your legal rights.
To obtain service under this warranty, please read the Warranty Leaflet included
or contact Conair Customer Service at aus_[email protected].
TO MAKE A WARRANTY CLAIM YOU MUST
RETAIN YOUR PROOF OF PURCHASE.

Vidal Sassoon and related logos are trademarks of
The Procter & Gamble Company used under license by Conair.
©2017 Conair Australia Pty. Ltd.
Suite 101, 18 Rodborough Rd
Frenchs Forest NSW 2086
Australia
Conair New Zealand Limited
PO BOX 251159
Pakuranga, Auckland 1706
New Zealand
CONTACT US
For advice & tips on your new VS product email us on:
aus_inf[email protected]
CUSTOMER SERVICE
Australia: 1800 650 263
New Zealand: 0800 266 247
Visit VSFORMEN.COM.AU for grooming tips & inspiration.

THE EASY TRIM / TOOL TIPS
16
IB-13/117B
YOU WERE
BORN TO
BE REAL,
NOT TO BE
PERFECT