Vu+ UNO 4K SE Quick start guide

English │Slovensky │Polski │Česky

What's included ?
RCU Battery RCU
Easy Setup Guide
External IR
Cable
HDMI
Cable
Power Cord
Power
Adapter
English

What's included ?
RCU Battery RCU
Easy Setup Guide
External IR
Cable
HDMI
Cable
Power Cord
Power
Adapter
English
11

Front Panel
Standby LED/
Touch key
IR Sensor
Mini TV
Displays TV streaming, graphic logo of channels
and uploaded user`s favorite images on 2.4”LCD.
Rear Panel
2x USB 3.0
Connects to a digital audio
system using S/PDIF cable.
Connects to TV using HDMI Cable
for both audio and video signals,
also for using other devices
connected to HDMI In port.
Power Adaptor Input
On/O Switch
Supports FBC-S2 and FBC-C and Dual DVB-T2.
FBC Pluggable Tuner Slot
RS232
/ External IR
Gigabit Ethernet
Detachable 2.5”
HDD BRKT
HDMI In/Out
Smart Card
CI
S/PDIF
22

Front Panel
Standby LED/
Touch key
IR Sensor
Mini TV
Displays TV streaming, graphic logo of channels
and uploaded user`s favorite images on 2.4”LCD.
Rear Panel
2x USB 3.0
Connects to a digital audio
system using S/PDIF cable.
Connects to TV using HDMI Cable
for both audio and video signals,
also for using other devices
connected to HDMI In port.
Power Adaptor Input
On/O Switch
Supports FBC-S2 and FBC-C and Dual DVB-T2.
FBC Pluggable Tuner Slot
RS232
/ External IR
Gigabit Ethernet
Detachable 2.5”
HDD BRKT
HDMI In/Out
Smart Card
CI
S/PDIF
33

Remote Control
TV Power
Navigation Keys
Navigates up/down and left/right
on the menu options.
Up/down keys are used to call up
the channel list.
Teletext
Displays the teletext information of
the current channel if the channel
provides subtitles.
Subtitle
Displays the subtitle of
the current channel
if the channel provides subtitle.
AV
This button is used
when selecting video source of TV.
EPG
Displays the Electronic Program
Guide (EPG) information
if provided.
CHANNEL+/-
Color Keys
• Red – mainly used for REC,
Cancel, etc.
• Green – mainly used for OK
• Yellow
• Blue
Volume+/-
EXIT
Numeric Keys
STB Power
Mute
Connecting Cable
1. Connect Satellite/Cable Signal cable to UNO 4K SE
Vu+ UNO 4K SE has pluggable FBC tuner slot which you can choose FBC-S2 tuner or FBC-C tuner
or Dual DVB-T2 tuner
1) Combination FBC-S2 Tuner
2) Combination FBC-C Tuner
3) Dual DVB-T2 Tuner
2. Connect UNO 4K SE to the TV
One HDMI cable is included in the accessory box. Connect one end of the cable to the HDMI
input of TV. Connect the other end to the HDMI output of UNO 4K SE.
44

Remote Control
TV Power
Navigation Keys
Navigates up/down and left/right
on the menu options.
Up/down keys are used to call up
the channel list.
Teletext
Displays the teletext information of
the current channel if the channel
provides subtitles.
Subtitle
Displays the subtitle of
the current channel
if the channel provides subtitle.
AV
This button is used
when selecting video source of TV.
EPG
Displays the Electronic Program
Guide (EPG) information
if provided.
CHANNEL+/-
Color Keys
• Red – mainly used for REC,
Cancel, etc.
• Green – mainly used for OK
• Yellow
• Blue
Volume+/-
EXIT
Numeric Keys
STB Power
Mute
Connecting Cable
1. Connect Satellite/Cable Signal cable to UNO 4K SE
Vu+ UNO 4K SE has pluggable FBC tuner slot which you can choose FBC-S2 tuner or FBC-C tuner
or Dual DVB-T2 tuner
1) Combination FBC-S2 Tuner
2) Combination FBC-C Tuner
3) Dual DVB-T2 Tuner
2. Connect UNO 4K SE to the TV
One HDMI cable is included in the accessory box. Connect one end of the cable to the HDMI
input of TV. Connect the other end to the HDMI output of UNO 4K SE.
55

Connecting Cable
3. Power Up
A power cord and an adapter are provided in the accessory box.
Plug the round end of the adapter power cord into the power input of UNO 4K SE.
DC input condition
• 12V 3.5A
NOTE
Run First Time Installation
Step 1. Video Input Selection
HDMI
Video input selection
Please press OK if you can see this page on your TV or
select a dierent input port.
The next input port will be automatically probed in 20 seconds.
Step 2. Video Mode Selection
720p
1080i
1080p
2160p
576p
480p
576i
Video mode selection
66

Connecting Cable
3. Power Up
A power cord and an adapter are provided in the accessory box.
Plug the round end of the adapter power cord into the power input of UNO 4K SE.
DC input condition
• 12V 3.5A
NOTE
Run First Time Installation
Step 1. Video Input Selection
HDMI
Video input selection
Please press OK if you can see this page on your TV or
select a dierent input port.
The next input port will be automatically probed in 20 seconds.
Step 2. Video Mode Selection
720p
1080i
1080p
2160p
576p
480p
576i
Video mode selection
77

Run First Time Installation
Step 3. Language Selection
Step 4. Conguring Satellite Connection
Welcome.
This start wizard will guide you through the basic setup
of your STB.
Press the OK button on your remote control to move to the
next step.
English
German
Catalan
Croatian
Please use the UP and DOWN keys to select your language.
Afterwards press the OK button.
Run First Time Installation
Using LEFT/RIGHT keys, you can choose one of the following Conguration Modes:
• Nothing connected
• Simple
• Loop-through to
• Equal to: mode to use the same conguration as that of Tuner B.
• Advanced: for an advanced user conguration.
Use the up/down keys on your remote control to select
an option. After that, press OK.
Use wizard to set up basic features
Exit wizard
Use the left and right buttons to change an option.
Conguration Mode not congured
88

Run First Time Installation
Step 3. Language Selection
Step 4. Conguring Satellite Connection
Welcome.
This start wizard will guide you through the basic setup
of your STB.
Press the OK button on your remote control to move to the
next step.
English
German
Catalan
Croatian
Please use the UP and DOWN keys to select your language.
Afterwards press the OK button.
Run First Time Installation
Using LEFT/RIGHT keys, you can choose one of the following Conguration Modes:
• Nothing connected
• Simple
• Loop-through to
• Equal to: mode to use the same conguration as that of Tuner B.
• Advanced: for an advanced user conguration.
Use the up/down keys on your remote control to select
an option. After that, press OK.
Use wizard to set up basic features
Exit wizard
Use the left and right buttons to change an option.
Conguration Mode not congured
99

Run First Time Installation
If you choose Simple conguration mode, the following picture will appear.
FBC-Cable tuner of Vu+ can be used selectively, however you can tuner into only one
mode(S2 or Cable) at a time.
For the other modes, please refer to the user manual of UNO 4K SE.
Use the left and right buttons to change an option.
Please set up tuner A.
Conguration Mode
Mode
Port A
Port B
Set Voltage and 22KHz
Send DiSEqC only on satellite change
DiSEqC A/B
Astra(19.2E)
Hotbird(13.0E)
yes
no
Simple
Here you will be asked whether you want to install the default satellite lists. Press OK and
the following image appears:
Do you want to install default sat lists?
No
Yes
Step 5. Channel Scan
(Selecting Scan Mode - Automatic Scan / Manual Scan)
• Automatic Scan
If you choose Automatic Scan, you will be asked whether to erase all the existing channels
before scanning.
Run First Time Installation
What do you wan to scan?
Yes, ScanTuner A(DVB-S2)
No, scan later manually
Yes, Clear before scan
• If you press No, following image will appears.
Channel scanning is possible either in Automatic Scan mode or Manual Scan mode.
Do you want to do a service scan?
Yes, do a manual scan now
No, scan later manually
Yes, do an automatic scan now
1010

Run First Time Installation
If you choose Simple conguration mode, the following picture will appear.
FBC-Cable tuner of Vu+ can be used selectively, however you can tuner into only one
mode(S2 or Cable) at a time.
For the other modes, please refer to the user manual of UNO 4K SE.
Use the left and right buttons to change an option.
Please set up tuner A.
Conguration Mode
Mode
Port A
Port B
Set Voltage and 22KHz
Send DiSEqC only on satellite change
DiSEqC A/B
Astra(19.2E)
Hotbird(13.0E)
yes
no
Simple
Here you will be asked whether you want to install the default satellite lists. Press OK and
the following image appears:
Do you want to install default sat lists?
No
Yes
Step 5. Channel Scan
(Selecting Scan Mode - Automatic Scan / Manual Scan)
• Automatic Scan
If you choose Automatic Scan, you will be asked whether to erase all the existing channels
before scanning.
Run First Time Installation
What do you wan to scan?
Yes, ScanTuner A(DVB-S2)
No, scan later manually
Yes, Clear before scan
• If you press No, following image will appears.
Channel scanning is possible either in Automatic Scan mode or Manual Scan mode.
Do you want to do a service scan?
Yes, do a manual scan now
No, scan later manually
Yes, do an automatic scan now
1111

Run First Time Installation
Press OK to initiate the channel scan.
• Channel Scanning
The scanned channels will be displayed if the previous congurations have
been done correctly.
scan done! 2 services found!
ANIXE HD
ASTRA HD+
Service Scan
Step 6. Install Default Service List
Please choose the default services lists you want to install.
Astra(19.2E)
Hotbird(13.0E)
no
no
Step 7. Parental Control Option
Here you can choose whether to enable the parental control option. If you press OK,
you will be asked to enter PIN number
New PIN
Reenter new PIN
****
****
Change pin code
Do you want to enable the parental control feature
on your STB?
No
Yes
You need to set a PIN code and hide it from your children.
Do you want to set the pin now?
No
Yes
1212

Run First Time Installation
Press OK to initiate the channel scan.
• Channel Scanning
The scanned channels will be displayed if the previous congurations have
been done correctly.
scan done! 2 services found!
ANIXE HD
ASTRA HD+
Service Scan
Step 6. Install Default Service List
Please choose the default services lists you want to install.
Astra(19.2E)
Hotbird(13.0E)
no
no
Step 7. Parental Control Option
Here you can choose whether to enable the parental control option. If you press OK,
you will be asked to enter PIN number
New PIN
Reenter new PIN
****
****
Change pin code
Do you want to enable the parental control feature
on your STB?
No
Yes
You need to set a PIN code and hide it from your children.
Do you want to set the pin now?
No
Yes
1313

For more information about UNO 4K SE
By long pressing 'Help' button, you can also access to On-Screen Manual page.
The content in this Easy Setup Guide is subject to change without notice.
1414

For more information about UNO 4K SE
By long pressing 'Help' button, you can also access to On-Screen Manual page.
The content in this Easy Setup Guide is subject to change without notice.

Slovensky
Rýchly sprievodca inštaláciou
Obsah balenia:
Batérie DO
Rýchla
príručka
Externé
IR oko
HDMI
kábel
Sieťový
kábel
Nap.
Adaptér

Slovensky
Rýchly sprievodca inštaláciou
Obsah balenia:
Batérie DO
Rýchla
príručka
Externé
IR oko
HDMI
kábel
Sieťový
kábel
Nap.
Adaptér
1717

Standby LED/
Dotykové
tlačidlo
IR Senzor
Mini TV
Zobrazuje TV stream, gracké logo programu a
nahraté obľúbené užívateľské obrázky na 2.4” LCD.
Predny Panel
Zadny panel
2x USB 3.0
Pripojenie k digitálnemu
audiosystému pomocou
kábla S / PDIF.
Pripojenie k TV pomocou kábla
HDMI pre audio a video signál,
tiež na používanie iných zariadení
pripojených k portu HDMI.
Vstup pre sieťový
adaptér
Vypínač On/O
Podporované FBC-S2 a FBC-C a Duálny DVB-T2.
FBC zásuvka pre tuner
RS232
/ Externé IR
Gigabitový Ethernet
Oddeliteľný 2.5”
HDD BRKT
HDMI Vstup/Výstup
Smart karta
CI
S/PDIF
1818