VXI BlueParrott B350-XT User manual

VXi BlueParrott®
B350-XT
User Guide

VXi BlueParrott®B350-XT User Guide PAGE 2
TABLE OF CONTENTS
Safety nformation ..........................................3
Package Contents ..........................................4
Glossary of Terms ............................................5
Headset Overview ..........................................6
Charging the Headsets ....................................7
•Battery Power Indicators
• Operation While Using the Charger/Adapter
Getting Started ................................................9
•On/Off/Standby
•Pairing with a Phone
i. FC Pairing
ii. Regular Pairing
•Wearing and Adjusting the B350-XT
• Making/Taking Calls
Parrott Button ................................................13
Advanced Features and Functions ..................14
•Multiple Device Pairing
•Multipoint Mode
• Proximity Pairing
•Additional Features and Functions
i. Last umber Redial
ii. Call Waiting/Rejecting a Call
iii. Rejecting a Call
iv. Phone Voice Control
v. Muting
vi. Transferring Audio
vii. Turn Headset Indicator Lights On/Off
• Resetting Headset Paired Devices List
Functions & ndicators Table ..........................18
Specifications ................................................24

• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.
• Do not immerse any part of this product in water.
• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.
• Use only the power cords included with this product.
• Avoid temperatures exceeding 140° F (will cause equipment failure).
VXi BlueParrott®B350-XT User Guide PAGE 3
SAFETY INFORMATION
IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid
injury, set the volume to the lowest com ortable level. I you experience ringing in your ears, or voices
sound mu led, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s
possible or your ears to adapt to volume that is too high, and this could result in permanent hearing
damage without any noticeable discom ort.

VXi BlueParrott®B350-XT User Guide PAGE 4
PACKAGE CONTENTS
1. B350-XT™ Headset with Leatherette Ear Cushion
2. Spare Foam Ear Cushion
3. Spare Microphone Windscreen
4. USB Charging Cable
5. AC/DC Wall Charger
6. Auto (DC) Adapter
7. Quick-Start Guide*
8. Warranty and Compliance Document*
*Not pictured.
2
3
1
5
4
Images are not shown to scale.
6

VXi BlueParrott®B350-XT User Guide PAGE 5
GLOSSARY OF TERMS
•On: Headset is on, but there is no connection to the phone
(red light will flash).
•MFB: Abbreviation for “Multifunction Button.”
•Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices.
•Paired: Two Bluetooth devices agree to communicate with one another.
•Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call
(blue light will flash).
•alk Mode: Headset is in use with the cell phone while the cell phone is on an active call
(blue light will flash).

E
A
D
B
F
C
VXi BlueParrott®B350-XT User Guide PAGE 6
HEADSET OVERVIEW
A. Flexible Microphone Boom (White dot indicates "talk" side.)
B. Volume Down
C. Volume Up/Mute
D. Multifunction Button (MFB)
E. ndicator Lights
F. Parrott Button

VXi BlueParrott®B350-XT User Guide PAGE 7
CHARGING THE HEADSET
Connect USB charger cord into the headset’s
USB charging port. f the headset is not fully
charged, the indicator will turn red. When the
indicator turns blue and stays blue the unit is
fully charged. A ully discharged battery will
need approximately 3.5 hours to achieve a
complete charge.
Battery Power Indicators
While charging, the MFB’s indicator light
shows the level of battery power on your
B350-XT as follows:
Blue light: Fully charged. Over 24 hours’
talk time.
Red light: Less than a full charge.
For best performance, keep charging
headset when not in use.
AC Charger Auto (DC) Charger
Headset Charging Port
Indicator Lights

VXi BlueParrott®B350-XT User Guide PAGE 8
CHARGING THE HEADSET (continued)
Operation While Using the Charger/Adapter
The B350-XT headset will operate from battery power or from the AC or DC charger/adapter.
NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent
back to the phone.
When the headset is operating from the battery, all indicator lights and sounds will function as described
in this guide.
When the headset is operating from the charger/adapter, the headset—including the audio indicators—
will function as described in this user guide. However, the MFB lights will indicate the battery charge status.
While the headset is on the charger, press the MFB long enough to power the unit on. The headset should
reconnect automatically unless your phone is set to “always ask” for connection requests.
After the battery is fully charged, the MFB charge light will turn blue and stay blue as long as the
charger/adapter is connected to the headset. While the headset is fully charged and the charge light
is blue, the blue indicator light will also be on if the headset is powered on.

VXi BlueParrott®B350-XT User Guide PAGE 9
GETTING STARTED
On/Off/Standby
urn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear a voice prompt,
“Power on.” The red light will flash once every second.
urn Headset Off (conserves battery power): Hold down the MFB for approximately 4–5 seconds until
you hear a voice prompt, “Power off.” A red light will flash 4 times and the headset will turn off.
Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the
last device that it was paired with, putting itself into Standby Mode.
Pairing with a Phone
NFC (One- ouch) Pairing
1. Make sure that NFC is enabled on your cell phone.
2. Place the NFC zone of your cell phone against the NFC zone
of the headset and hold together until your cell phone
confirms pairing is successful.
Note: NFC and One-Touch Pairing are dependent on your cell
phone. The size and sensitivity o your phone’s NFC zone and how
to connect the headset may vary between devices.

VXi BlueParrott®B350-XT User Guide PAGE 10
GETTING STARTED (continued)
Manual Pairing
Placing Headset into Pairing Mode
With the headset powered off, press the MFB until the light rapidly flashes blue and you hear the audio
prompt “Power on.” Keep holding the MFB for approximately 10 seconds until you hear
“Discovering.” Headset will be visible for pairing to devices for 120 seconds.
Pairing to a Cell Phone
1. Make sure that other Bluetooth devices are turned off or out of range.
2. Place headset into pairing mode.
3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions.
4. Select “VXi B350-XT” to pair. (Passcode is “0000” if needed.)
5. When connected, the headset will give you the voice prompt, “Your headset is connected” (in English).