VYPER ROBUST STEEL SPORT User manual

ASSEMBLY GUIDE
ROBUST STEEL
SPORT

Safety & Warnings
The VYPER CHAIR complies with all legally prescribed safety rules and
regulations. Inappropriate use may cause damage to the product and
injury or death to persons.
It is crucial to read the operation manual prior to using the VYPER CHAIR.
It provides you with important information about safe and proper
assembly, use and maintenance of the VYPER CHAIR.
Children should never use this VYPER CHAIR unless closely supervised by
an adult.
Do not allow horseplay on or around the VYPER CHAIR.
SERIOUS OR FATAL INJURY CAN OCCUR FROM THE VYPER CHAIR
FROM TIPPING OVER OR FALLING OFF OF THE VYPER CHAIR.
ACCORDINGLY:
Keep weight centered when using the VYPER CHAIR.
Only use VYPER CHAIR on a at level surface, free of debris.
Keep one or both feet on the ground at all times when sitting on the
VYPER CHAIR.
Never stand on the VYPER CHAIR.
Never allow more than one person on the VYPER CHAIR.
DO NOT USE THE VYPER CHAIR IF IT APPEARS DAMAGED OR BROKEN.
WARNING: To avoid the danger of suocation, keep this plastic bag away
from babies and children. Do not use this bag in cribs, beds, carriages or
playpens. This bag is not a toy.
Read all instructions before assembly and use of VYPER CHAIR. Failure
to comply with and observe all assembly, safety, operating instructions
and warnings regarding the use of the VYPER CHAIR may result in serious
bodily injury or death.
This includes strictly following all assembly instructions in the order in which
they appear.
Assembling any VYPER CHAIRin an order other than that set out in the instructions
increases the risk of product damage or injury or death to individuals.
Never attempt to sit on the VYPER CHAIR until it is fully assembled and all
the fasteners are tightened in accordance with the assembly instructions.
Failure to comply with this warning can lead to product damage and
injury or death to individuals.
Do not attempt to repair any broken or defective parts or assemble using
any parts that are damaged or defective. Please contact manufacturer
immediately at: [email protected]
Never use substitute parts when assembling the VYPER CHAIR. Please
contact manufacturer immediately if replacement parts are needed
from VYPER CHAIR.
WARNING

VYPER was founded by the Rusch Family, a family that spent countless hours in the
garage, starting one project after another. After years of torture using cheap chairs
and hundreds of falls, Chris Rusch (known for being a master in metal shaping),
designed & built the rst ever VYPER CHAIR.
The VYPER CHAIR is strategically designed to prevent tipping over while rolling,
provide relieving back support, improve sitting posture and increase comfort while
using the highest quality American-made materials.
With their passion for the garage industry, Dayne and Dylan (the brothers) took
over VYPER years ago with the determination to launch the highest quality
products in any industry under the VYPER Brand while continuing to provide jobs
to the American people.
TOOLS REQUIRED
FOR ASSEMBLY
3/43/4
1/21/2
3/83/8
3/43/4
1/21/2
3/83/8
3/43/4
1/21/2
3/83/8
3/43/4
1/21/2
3/83/8
3/43/4
1/21/2
3/83/8
3/43/4
1/21/2
3/83/8
x2 or x2 or x1
and x1
x1
x1
1/2” WRENCH AND/OR SOCKET | 3/4” WRENCH AND/OR SOCKET 3/8” WRENCH AND/OR SOCKET
*POWER TOOLS NOT RECOMMENDED!

X8
X2
X8
X2
X5 X1
2
2
2
9
9
2
5
5
5
8
8
5
2 2
5 5
1:1 1:11:1 1:1
STEP 1 STEP 2
STEP 2A
* FINGER TIGHTEN BOLTS
* NO HARDWARE,
LEAVE OPEN
* NUTS WILL
HAVE RESISTANCE
* NUTS WILL
HAVE RESISTANCE
* DO NOT TIGHTEN
* HUB NOTCHES
INSERTED INTO
CORRESPONDING
LEG SLOTS

X5 X10
X1
X5 X1X2
X1
X2 X2
X1
X5 X5 X1
1
1
3
3
3
10
10
3
3
3
12
12
2
11
11
5 13
5
6
6
4
4
15 7
7
15
2
1
5
4
1:1
1:1 1:1 1:1
STEP 3 STEP 4 STEP 4A
* NUTS WILL
HAVE RESISTANCE
* OKAY TO TIGHTEN ALL BOLTS FROM
PREVIOUS STEPS
3
1:1
*POWER TOOLS NOT RECOMMENDED!
* DO NOT OVER TIGHTEN
2
13

14 PARTS
X4 |JHS08048-GR5-YZ
X12 |JHS05024-GR5-YZ
X5 |JFS08
X12 |JFS05
2
5
1
4
3
X15 |JHS04032-GR5-YZ
STEP 5
WARNING!
14
X1
HEIGHT ADJUSTMENT OPERATION
HOLD SEAT WHILE REMOVING PIN TO ADJUST HEIGHT
ADJUST SEAT TO DESIRED HEIGHT
RE-INSERT PIN
PIN MUST BE USED TO SECURE SEAT POST
REMOVE WEIGHT TO ADJUST
ENSURE PIN CLIP IS SECURE *AUDIBLE CLICK*
* DO NOT ADJUST SEAT HEIGHT WHILE
WEIGHT IS APPLIED, MAY CAUSE INJURY
OR DAMAGE TO CHAIR

X1 |SEAT X5 |SUPPORT LEG X1 |BACKREST BASE X1 |BACKREST CUSHION X1 |SEAT POST PIN
X1 |STATIONARY TOOL TRAY X1 |CENTER HUB X1 |BACKREST SPINE X1 |SEAT POST X5 |3” SWIVEL CASTER
6 8 10 12 14
7 9 11 13 15
VYPER INDUSTRIAL CUSTOMER SERVICE
[phone] OR [email protected]
VISIT WWW.VYPERINDUSTRIAL.COM

ROBUST STEEL
SHARE THE LOVE!
If you love your VYPER CHAIR, we’d be honored if you left us a review on our website!
Want a VYPER $25 gift card?
Take a screenshot of your review and email it to: [email protected]
STILL HAVE QUESTIONS?
Visit: www.vyperindustrial.com/pages/assembly-tutorials
Call: 920.301.3822
RETURN INFO
If your chair was damaged during shipping please follow the steps below:
Take a picture of the box and parts that were damaged along with your packing slip
Send pictures to [email protected] with your order number
Once we receive the inquiry, we will contact you to resolve the issue
To review our refund policy, please visit: www.vyperindustrial.com/policies/refund-policy
CONTACT US
Please contact us at anytime with any questions, concerns or
feedback and we will respond as soon as possible.
[email protected] 920.301.3822
SPORT
CHECK OUT VYPER ENERGY
ENERGY
WITHOUT ALL
THE ARTIFICIAL SH*T
WWW.VYPERENERGY.COM