W & W Manufacturing ECO User manual

MADE IN
USA BY:
W & W Manufacturing Co
R R
R
ANALYZER Ia, IIIa & VIa
ECO Analyzer/Charger
ECO Analyzer/Charger
One unit will:
a) Analyze your battery
b) Charge your Battery
c) Li-ion - NiCd - NiMh
Charge Battery
Analyze battery
W: ECO Analyzer Charger Manual Rev.7.pdf 05/17/2013
Page 3 of 3
W & W Manufacturing Co.
800 South Broadway, Hicksville, NY 11801
U.S. & Canada: 800-221-0732 / 516-942-0011 fax: [phone]
www.ww-manufacturing.com
All specifications and prices are subject to change without notice,
ECO Analyzer / Charger
ECO Analyzer / Charger
Analyzing Batt.
Charging Batt.
......
956
......
2. Push cup down until tabs lock
in place.
ECO Analyzer /Charger Cup Installation
and Removal
Specification
A) Li-ion/polymer battery packs, max. two cells/pack.Charge:
C) : Battery dependent, max. 1,100 mAhCharge current
D) 1cell Li-ion/polymer battery pack, disch. At 150mAh.Discharge current:
Two cell Li-ion/polymer and six cell Nickle based battery@ 300mAh
B) NiCd and NiMh battery packs, max. ten cells/pack
Charge/:
4. Disconnect power
prior to removing cup.
To remove cup, push locking tabs
in from both sides.
Important!
Unit without cup. 1. Line up contacts of cup
with Charger contacts.
3. :
BE SURE CUP IS INSTALLED
PRIOR TO
Applying power to unit.
IMPORTANT
6. Lift cup straight up.
ECO Analyzer / Charger
ECO Analyzer / Charger ECO Analyzer / Charger
ECOAnalyzer / Charger
ECOAnalyzer / Charger

Page 1 of 3 Page 2 of 3
Analyzer ready
Select Chemistry
NiCd
Analyzer Dischg.
1530mAh .......
Analyzer Rechg.
....... 2000mAh
Batt. Capacity
2000 mAh
Analyzer Chg.
.......
Battery
Charged
Charging
.......
Charger ready
Eco Analyzer/Charger
Analyzer Charger
OR
No battery Installed,
press Function button
to select Analyzer
or Charger Mode.
No battery Installed,
Function Button
only used in
Analyzer Mode
Display Flashing
Display Flashing
Flashing display
indicates battery is Charged
Analyzer Charger
Operations
Battery installed, press
function button to
select Batt chemistry,
NiCd or Lithium
Battery installed,
Battery installed,
,the dots in the lower Right
,the dots in the lower Left
corner will go back and
corner will go back and
Forth indicating the Batt is
discharging and giving the Cap.
As the Batt discharges in mAh
Forth indicating the Batt is
recharging and giving the Cap.
As the Batt. recharges in mAh
Battery installed,
,the dots in the lower
,left corner will go
,back and fourth indicating
the battery is Charging
Battery installed,
The dots in the lower
,left corner will go
,back and fourth indicating
the battery is Charging
Display 1
Display 2
Display 3
Display 4
Display 5
Display 6
Battery Analyzed
actual
Capacity of battery in mAh
Table of contents
Page Description
1 Operation of ECO Analyzer - Charger
2 Analyzer and Charger Displays
3 Cup installation and removal
3 Specifications
READ FIRST
Display (1)
No Battery installed
Display (2)
Battery installed
Display (3)
Battery installed
Display (5)
Battery installed
Display (6)
Battery installed
Display (4)
Battery installed