
User
Manual
Step 1: Charge
Charge the LYT bottle cap fully
before use. Press activation button
to indicates battery life.
Green light indicates 40% - 100%
Orange light indicates 11% - 39%
Red light indicates 1% - 10%
Quick Start:
Step 4: Cap
Screw on the LYT
bottle cap and
tighten for proper
seal.
Step 3: Fill
Fill your bottle with
tap water. Note: Not
suitable for water
from stream or a river.
Step 2: Activate Self-Cleaning
The bottle is shipped with the Self-Cleaning feature turned
OFF to conserve the battery life. Press and hold the power
button for 5 seconds to activate self-cleaning mode. The
BLUE LIGHT flashes three times to indicate self-cleaning
mode is ON. Once self-cleaning is activated, the cap will
turn on automatically every hour for a few seconds to keep
your bottle odor-free. In case you want to preserve the
battery life, you can turn o the self-cleaning feature by
simply pressing the power button for 5 seconds. The GREEN
LIGHT will flash to indicate self-cleaning mode is OFF.
5 seconds
Double
press
Step 5: UV water treatment
Gently press button on top of cap
2 times to treat your water. This
destroys 99.99% of E.coli in 3
minutes from your drinking
water. Product not tested on
viruses and pathogens.
Safety precautions:
•Do not irradiate eyes with UV-C light
•Not intended or not suitable for children
•Do not activate the cap without installing on the bottle
•Do not put in the dishwasher. Hand-wash only
•Water source must be clear for maximum effect
•Do not put in refrigerator