Wacker Neuson FUE Series User manual

Operator's manual
Converter
FUE, KTU
03.2011
0227699en / 002

Manufacturer
Wacker Neuson SE
Preußenstraße 41
80809 München
www.wackerneuson.com
Tel.: [phone]
Fax: [phone]
Translation of the original operator's manual in German

4
1 Foreword ....................................................................................................................6
2 Introduction ...............................................................................................................7
2.1 Means of representation for this operator's manual........................................... 7
2.2 Wacker Neuson representative.......................................................................... 8
2.3 Described machine types................................................................................... 8
2.4 Identification of the machine............................................................................... 9
3 Safety .......................................................................................................................10
3.1 Principle............................................................................................................ 10
3.2 Qualification of the operating personnel........................................................... 13
3.3 Protective gear ................................................................................................. 14
3.4 Transport.......................................................................................................... 14
3.5 Operating safety............................................................................................... 14
3.6 Safety during the operation of electric appliances............................................ 16
3.7 Maintenance..................................................................................................... 17
4 Safety and information labels ................................................................................19
5 Scope of delivery ....................................................................................................20
6 Structure and function ...........................................................................................21
6.1 Application........................................................................................................ 21
6.2 Functionality..................................................................................................... 21
7 Components and operator's controls ...................................................................22
7.1 FUE 1, 2........................................................................................................... 22
7.2 FUE 6............................................................................................................... 23
7.3 KTU 2 ............................................................................................................... 24
8 Transport .................................................................................................................25
9 Use and operation ...................................................................................................26
9.1 Prior to starting the machine ............................................................................ 26
9.2 Starting up........................................................................................................ 27
9.3 Decomissioning................................................................................................ 29
10 Maintenance ............................................................................................................30
10.1 Maintenance schedule ..................................................................................... 30
10.2 Maintenance work ............................................................................................ 31
11 Troubleshooting ......................................................................................................32
11.1 FUE 1, 2, KTU 2............................................................................................... 32
11.2 FUE 6 ............................................................................................................... 33
Contents

5
12 Disposal ...................................................................................................................34
12.1 Disposal of waste electrical and electronic equipment..................................... 34
13 Accessories .............................................................................................................35
14 Technical data .........................................................................................................36
14.1 FUE 1 ............................................................................................................... 36
14.2 FUE 2 ............................................................................................................... 37
14.3 FUE 6 ............................................................................................................... 38
14.4 KTU 2 ............................................................................................................... 39
14.5 Extension cable................................................................................................ 40
15 Glossary ...................................................................................................................42
EC Declaration of Conformity ................................................................................45

1 Foreword
6
1 Foreword
This operator's manual contains information and procedures for the safe opera-
tion and maintenance of your Wacker Neuson machine. In the interest of your
ownsafetyand topreventaccidents,youshouldcarefullyreadthroughthesafety
information, familiarize yourself with it and observe it at all times.
This operator's manual is not a manual for extensive maintenance and repair
work. Such work should be carried out by Wacker Neuson service or authorized
specialists.
The safety of the operator was one of the most important aspects taken into con-
sideration when this machine was designed. Nevertheless, improper use or in-
correct maintenance can pose a risk. Please operate and maintain your Wacker
Neuson machine in accordance with the instructions in this operator's manual.
Your reward will be troublefree operation and a high degree of availability.
Defective machine parts must be replaced immediately!
Please contact your Wacker Neuson representative if you have any questions
concerning operation or maintenance.
All rights reserved, especially reproduction and distribution rights.
Copyright 2011 Wacker Neuson SE
No part of this publication may be reproduced in any form or by any means, elec-
tronic or mechanical, including photocopying, without the expressed written per-
mission of Wacker Neuson.
Any type of reproduction, distribution or storage on data media of any type and
form not authorized by Wacker Neuson represents an infringement of copyright
and will be prosecuted.
We expressly reserve the right to make technical modifications – even without
special notice – which aim at further improving our machines or their safety stan-
dards.

2Introduction
7
2 Introduction
2.1 Means of representation for this operator's manual
Warning symbols
This operator's manual contains safety information of the categories:
DANGER, WARNING, CAUTION, NOTICE.
Theyshouldbefollowedtopreventdangertolifeandlimboftheoperatorordam-
age to equipment and exclude improper service.
Notes
Note: Complementary information will be displayed here.
DANGER
This warning notice indicates immediate hazards that result in serious injury or
even death.
fDanger can be avoided by the following the actions mentioned.
WARNING
This warning notice indicates possible hazards that can result in serious injury
or even death.
fDanger can be avoided by the following the actions mentioned.
CAUTION
This warning notice indicates possible hazards that can result in minor injury.
fDanger can be avoided by the following the actions mentioned.
NOTICE
This warning notice indicates possible hazards that can result in material dam-
age.
fDanger can be avoided by the following the actions mentioned.

2 Introduction
8
Instructions
fThis symbol indicates there is something for you to do.
1. Numbered instructions indicate thatyouhave to carry out something in adefined
sequence.
This symbol is used for lists.
2.2 Wacker Neuson representative
Depending on your country, your Wacker Neuson representative is your Wacker
Neuson service, your Wacker Neuson affiliate or your Wacker Neuson dealer.
You can find the addresses in the Internet at www.wackerneuson.com.
The address of the manufacturer is located at the beginning of this operator's
manual.
2.3 Described machine types
This operator's manual is valid for different machine types from a product range.
Therefore some figures can differ from the actual appearance of your machine.
It is also possible that the descriptions include components which are not a part
of your machine.
Details for the described machine types can be found in the chapter Technical
data.

2Introduction
9
2.4 Identification of the machine
Nameplate data
The nameplate lists information that uniquely identifies your machine. This infor-
mation is needed to order spare parts and when requesting additional technical
information.
fEnter the information of your machine into the following table:
Item Designation Your information
1 Group and type
2 Construction year
3 Machine no.
4 Version no.
5 Item no.

3 Safety
10
3Safety
3.1 Principle
State of the art
Thismachinehasbeenconstructedwithstate-of-the-arttechnologyaccordingto
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper useThe machine may only be used for the operation of internal and external vibra-
tors.
The machines to be connected must have the appropriate connection specifica-
tions (voltage, frequency, phase number).
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required service and mainte-
nance instructions.
Any other use is regarded as improper. Any damage resultingfrom improper use
will voidthe warrantyand the liability on behalfof the manufacturer. Theoperator
assumes full responsibility.
Structural modifications
Never attempt to modify the machine without the written permission of the man-
ufacturer. To do so will endanger your safety and the safety of other people! In
addition, this will voidthe warranty and the liability on behalf of the manufacturer.
Especially the following are cases of structural modifications:
Opening the machine and the permanent removal of components from
Wacker Neuson.
Installingnewcomponents whicharenotfrom WackerNeuson andnot equiv-
alent to the original parts in design and quality.
Installation of accessories which are not from Wacker Neuson.
It is no problem to install spare parts from Wacker Neuson.
It is no problem to install accessories that are available in the Wacker Neuson
product range of your machine. Please refer to the installation regulations in this
operator's manual.
Do not drill into the housing, e.g. to install signs. Water could penetrate the hous-
ing and damage the machine.

3 Safety
11
Requirements for operation
The ability to operate the machine safely requires:
Proper transport, storage and setup.
Careful operation.
Careful service and maintenance.
Operation Operate the machine only as intended and only when in proper working condi-
tion.
Operate the machine in a safety-conscious manner with all safety devices at-
tached and enabled. Do not modify or disable any safety devices.
Before starting operation, check that all control and safety devices are function-
ing properly.
Never operate the machine in a potentially explosive environment.
Maintenance
Regular maintenance work is required in order for the machine to operate prop-
erlyandreliablyovertime.Failuretoperformadequatemaintenancereducesthe
safety of the machine.
Strictly observe the prescribed maintenance intervals.
Do not use the machine if it requires maintenance or repairs.
Malfunctions
If you detect a malfunction, you must shut down and secure the machine imme-
diately.
Eliminate the malfunctions that impair safety immediately!
Have damaged or defective components replaced immediately!
For further information, refer to chapter Troubleshooting.
Spare parts, accessories
Use only spare partsfrom Wacker Neuson or such thatareequivalent to the orig-
inal parts in design and quality.
Only use accessories from Wacker Neuson.
Non-compliance will exempt the manufacturer from all liability.

3 Safety
12
Exclusion of liability
Wacker Neuson will refuse to acceptliability forinjuries to persons or for damage
to materials in the following cases:
Structural modifications.
Improper use.
Failure to comply with this operator's manual.
Improper handling.
Using of spare parts which are not from Wacker Neuson and not equivalent
to the original parts in design and quality.
Using of accessories which are not from Wacker Neuson.
Operator's manual
Always keep the operator's manual near the machine or near the worksite for
quick reference.
If you have misplaced the operator's manual or require an additional copy, con-
tactyourWackerNeusonrepresentativeor downloadtheoperator'smanualfrom
the Internet (www.wackerneuson.com).
Alwayshandoverthisoperator'smanualtootheroperatorsortothefutureowner
of the machine.
Country-specific regulations
Observe the country-specific regulations, standards and guidelines in reference
to accident prevention and environmental safety, forexample those pertaining to
hazardous materials and wearing protective gear.
Complement the operator's manual with additional instructions taking into ac-
count the operational, regulatory, national or generally applicable safety guide-
lines.
Operator's controls
Always keep the operator's controls of the machine dry, clean and free of oil or
grease.
Operating elements such as ON/OFF switch, gas handles etc. may not be
locked, manipulated or changed without authorization.
Checking for signs of damage
Inspectthemachine whenit is switched off forany signs ofdamage at leastonce
per work shift.
Do not operate the machine if there is visible damage or defects.
Have any damage or defects eliminated immediately.

3 Safety
13
3.2 Qualification of the operating personnel
Operator qualifications
Only trained personnel are permitted to start and operate the machine. The fol-
lowing rules also apply:
You are physically and mentally fit.
You have received instruction on how to independentlyoperate the machine.
You have received instruction in the proper use of the machine.
You are familiar with required safety devices.
You are authorized to start machines and systems in accordance with the
standards governing safety.
Your company or the operator has assigned you to work independently with
this machine.
Incorrect operation
Incorrect operation or misuse by untrained personnel can endanger the health
and safety of the operator or third persons and also cause machine and material
damage.
Operating company responsibilities
The operating company must make the operator's manual available to the oper-
ator and ensure that the operator has read and understood it.
Work recommendations
Please observe the recommendations below:
Work only if you are in a good physical condition.
Work attentively, particularly as you finish.
Do not operate the machine when you are tired.
Carry out all work calmly, circumspectly and carefully.
Never operate the machine under the influence of alcohol, drugs or medica-
tion. This can impair your vision, reactions and your judgment.
Work in a manner that does not endanger others.
Ensure that no persons or animals are within the danger zone.

3 Safety
14
3.3 Protective gear
Work clothing
Clothing should be appropriate, i.e. should be close-fitting but not restrict your
movement.
When on construction sites, do not wear long hair loosely, loose clothing or jew-
elry including rings. These objects can easily get caught or be drawn in by mov-
ing machine parts.
Only wear clothing made of material that is not easily flammable.
Personal protective gear
Wear personal protective gear to avoid injuries or health hazards:
Non-skid, hard-toed shoes.
Work gloves made of durable material.
Overalls made of durable material.
Hard hat.
Ear protection.
3.4 Transport
Switching off the machine
Before you transport the machine, switch it off and pull the plug out of the plug
receptacle. Allow the motor to cool down.
Transporting the machine
Secure the machine on the transport device against tilting, falling or slipping.
3.5 Operating safety
Explosible environment
Never operate the machine in a potentially explosive environment.

3 Safety
15
Work environment
Familiarize yourself with your work environment before you start work. This in-
cludes e.g. the following items:
Obstacles in the work and traffic area.
Load-bearing capacity of the ground.
The measures needed to cordon off the construction site from public traffic in
particular.
The measures needed to secure walls and ceilings.
Options available in the event of an accident.
Starting the machine
Observe the safety information and warning notices located on the machine and
in the operator's manual.
Never attempt to start a machine that requires maintenance or repairs.
Start the machine as described in the operator's manual.
Avoid body contact with grounded components.
Do not use components of to machine for climbing on or holding onto
Never use the protective hose,power cableor othercomponents ofthe machine
for climbing on or holding onto.
Switching off the machine
Switchoffthemachineandpullthe plugoutofthe plugreceptacleinthefollowing
situations:
Before breaks.
If you are not using the machine.
Store the machine orput it down in such a way thatit cannot tilt, fall down or slip.
Storage location
After operation, allow the machine to cool and then store it in a sealed-off, clean
and dry location protected against frost and inaccessible to children.

3 Safety
16
3.6 Safety during the operation of electric appliances
Specific regulations for electrical appliances
Observe the safety information provided in the brochure General Safety Rules
which is included in the scope of delivery of your machine.
Also observe the country-specific regulations, standards and guidelines in refer-
ence to accident prevention in connection with electrical equipment and ma-
chines.
WARNING Read all safety information and instructions. Failure to follow
the safety information and instructions may result inelectric shock, fire and/or se-
rious injury.
Save all safety information and instructions for future reference.
Electric power supply for electrical appliances of class rating I
Note: The rated voltage is indicated on the nameplate of your machine.
The machine must be connected to a 15 A/16 A shock-proof plug receptacle
(continental type) with a corresponding overload protection.
One of the following fault current protective switches is required:
Standard fault current protective switch (AC sensitive, Type A).
AC/DC sensitive fault current protective switch (Type B).
Themachinemayonlybe connectedtoanelectricpowersupplywith allmachine
parts in proper working condition. Take special notice of the following compo-
nents:
Plug.
Power cable over the entire length.
Switch diaphragm of the ON/OFF switch, if there is one.
Plug receptacles.
The machine may only be connected to an electric power supply whereby the
connector of the grounded conductor (PE) is intact.
There must be at least one of the following safety devices if connected to a sta-
tionary or mobile generator:
Fault current protective switch.
Isolation (earth leakage) monitor.
IT-net.
If you connect your machine to a worksite distribution board, the worksite distri-
bution board must be grounded.
Note: Observe the respective national safety regulations!

3 Safety
17
Extension cable
The machine may only be operated with undamaged and tested extension ca-
bles!
Only use extension cables with grounded conductor and correct connection of
the grounded conductor to the plug and coupling (only for machines of class rat-
ing I, see chapter Technical data).
Only use testedextension cableswhich aresuitable foruseatconstructionsites:
Average rubber hose H05RN-F or better – Wacker Neuson recommends
H07RN-F, an SOW cable, or a country-specific equivalent design.
Immediately replace damaged extension cables (e.g. tears in the sheathing) or
loose plugs and couplings.
Cable drums and multiple plug receptacles mustfulfill thesame requirements as
the extension cable.
Protectextensioncables,multipleplugreceptacles,cabledrumsandconnection
couplings against rain, snow or any other forms of moisture.
Uncoil the cable drum completely
Danger of fire due to wound cable drum.
Uncoil the cable drum completely before operation.
Protecting the power cable
Do not use the power cable to pull or lift the machine.
Do not unplug the power cable by pulling on the cable.
Protect the power cable from heat, oil and sharp edges.
If the power cable is damaged or the plug is loose, have it replaced immediately
by your Wacker Neuson representative.
Protecting from moisture
Protectthemachineagainstrain,snoworanyotherformsof moisture.Thiscould
cause damage or other malfunctions.
3.7 Maintenance
Maintenance work
Service and maintenance work must only be carried out to the extent described
in these operating instructions. All other procedures must be performed by your
Wacker Neuson representative.
For further information, refer to chapter Maintenance.

3 Safety
18
Disconnecting the machine from the electric power supply
Before carrying out service or maintenance work, pull the plug out of the plug re-
ceptacle in order to disconnect the machine from the electric power supply.
Cleaning Always keep the machine clean and be sure to clean it each time you have fin-
ished using it.
Do not use gasoline or solvents. Danger of explosion!
Do not use high pressure washers. Permeating water can damage the machine.
When electrical equipment is present, this can pose a serious injury risk from
electric shocks.

Safety and information labels
19
4 Safety and information labels
Your machine has adhesive labels containing the most important instructions
and safety information.
Make sure that all the labels are kept legible.
Replace any missing or illegible labels.
The item numbers for the labels are in the parts book.
2
Item Label Description
1 without KTU Warning of hot surface.
Read the operator's manual before start-
up.
2Guaranteed sound power level.
Do not open housing.
Read the operator's manual.
0219173
0219413

5 Scope of delivery
20
5 Scope of delivery
The scope of delivery includes:
Machine.
Operator's manual.
Parts book.
General safety information.