Wagan Brite Nite 4303 User manual

Item No. : 4303
BriteNite™
Pop-UpLantern™
User’s Manual
We are constantly improving our products so specifications are subject to change
without notice.

Brite Nite™Pop-Up Lantern™by Wagan Tech®
1
Thank you for purchasing the Brite Nite™Pop-Up Lantern™by Wagan Tech®. With
normal care and proper treatment, it will provide years of reliable service. Please read
all operating instructions carefully before use.
FEATURES
• CREE LED
• 3 light modes: High, Low and SOS
• Dual function flashlight and lantern
• Dual hooks for hands-free lighting
• Strong magnetic base
• Compact and lightweight
Hooks
Power
button
Magnets
Battery
compartment
(twist to open)
Non-slip
grip pads

User’s Manual—Read before using this equipment
2
SPECIFICATIONS
Lumens 200 (high), 100 (low)
Run Time 6 hours (high), 15 hours (low)
Battery 4 x AA batteries
IP Rating IPX4—water resistant
Impact Resistance 1 meter
Beam Distance 150 meters
CAUTION
• Never point the light beam directly into the eyes of another person
or animal.
• This product is not a toy: Do not allow children to play with or near
this item.
• Do not store in direct sunlight or near a heat source.
• Use for intended purposes only.
• Do not submerge in water.
• This product contains strong magnets that may cause interference with
pacemakers and other implanted medical devices when placed within a close
proximity. Keep this product at least 6 inches from your chest if you have a
pacemaker.
INSTALLING THE BATTERIES
1. Unscrew the battery compartment cover
2. Remove the battery cartridge.
3. Install 4 AA batteries.
• For best performance, replace all batteries at the same time. Do not mix
old and new batteries or batteries of different types (alkaline, heavy
duty, and rechargeable).
4. Replace cartridge, align tab with slot.
5. Replace the battery compartment cover.

Brite Nite™Pop-Up Lantern™by Wagan Tech®
3
Unscrew cap
to remove
Battery compartment
slides out/in
Align tab
with slot
CARE AND MAINTENANCE
• Periodically wipe the entire lantern with a soft clean cloth.
• To improve the ease of sliding the lantern up and down, add a small amount of
silicone lubricant to the lamp sliding surface
• Batteries should be removed from your unit if it will not be used for an extended
period of time.
USAGE
The Pop-Up Lantern has 3 light modes.
1. To turn unit on: press the power button
2. To change modes: press the power button to cycle through the modes once for
each mode (High > Low > SOS > OFF).
Pull up
to use as
a lantern!
If you’re looking for quality camp lighting, visit our website.