WAGO 750-530 User manual

Pos:2/Dokumentationallgemein/Einband/EinbandHandbuch- F ro nts ei t e 2015 - mit DocV ari abl e n (Sta nd ar d)@ 9\mod_1285229289866_0.docx@ 64941 @ @ 1
WAGO-I/O-SYSTEM 750
Manual
750-530(/xxx-xxx)
8DO 24V DC 0.5A
8-Channel Digital Output Module 24 VDC; Short
-
circuit Protected; High-side Switching
Version 1.2.0
Pos: 3 / All e S eri e n ( All ge mei n e M od ul e) /Hi nw eis e z ur Dok um ent ati o n/I mpr es su m für St a ndar dh an d büc her - allg . Anga ben, Ansc hrifte n, Telef onnu mmern un d E-Mail-A dr es se n @ 3\mod_1219151118203_21.docx@ 21060 @ @ 1

2 WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
© 2015 by WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.
WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27
D-32423 Minden
Phone: [phone] – 0
Fax: [phone] – 1 69
E-Mail: [email protected]om
Web: http://www.wago.com
Technical Support
Phone: [phone] – 5 55
Fax: [phone] – 85 55
E-Mail: [email protected]om
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: [e-mail]
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
=== Ende d er Lis t e f ür Te xt mar ke Ei nb and _ vor n e = = =

WAGO-I/O-SYSTEM 750 Table of Contents 3
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 5 /D o ku ment ati on allg e mei n /Ver zei c hni ss e/I nh alt s verz ei ch nis - Üb erschri ft oG und V erzeic hnis @ 3\mod_1219151230875_21.docx@ 21063 @ @ 1
Table of Contents
1Notes about this Documentation................................................................. 5
1.1 Validity of this Documentation................................................................. 5
1.2 Copyright................................................................................................... 5
1.3 Symbols..................................................................................................... 6
1.4 Number Notation....................................................................................... 8
1.5 Font Conventions ...................................................................................... 8
2Important Notes ........................................................................................... 9
2.1 Legal Bases ............................................................................................... 9
2.1.1 Subject to Changes ............................................................................... 9
2.1.2 Personnel Qualifications....................................................................... 9
2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying
Provisions ............................................................................................. 9
2.1.4 Technical Condition of Specified Devices......................................... 10
2.2 Safety Advice (Precautions).................................................................... 11
3Device Description ..................................................................................... 13
3.1 View ........................................................................................................ 15
3.2 Connectors............................................................................................... 16
3.2.1 Data Contacts/Internal Bus................................................................. 16
3.2.2 Power Jumper Contacts/Field Supply ................................................ 17
3.2.3 CAGE CLAMP®Connectors ............................................................. 19
3.3 Display Elements .................................................................................... 20
3.4 Schematic Diagram ................................................................................. 21
3.5 Technical Data ........................................................................................ 22
3.5.1 Device Data ........................................................................................ 22
3.5.2 Power Supply...................................................................................... 22
3.5.3 Communication .................................................................................. 22
3.5.4 Outputs ............................................................................................... 22
3.5.5 Connection Type ................................................................................ 23
3.5.6 Climatic Environmental Conditions................................................... 23
3.6 Approvals ................................................................................................ 24
3.7 Standards and Guidelines........................................................................ 26
4Process Image ............................................................................................. 27
5Mounting..................................................................................................... 28
5.1 Mounting Sequence................................................................................. 28
5.2 Inserting and Removing Devices ............................................................ 29
5.2.1 Inserting the I/O Module .................................................................... 29
5.2.2 Removing the I/O Module.................................................................. 30
6Connect Devices ......................................................................................... 31
6.1 Connecting a Conductor to the CAGE CLAMP®................................... 31
7Using Interference-Free Variants of I/O Modules in Safety Related
Applications................................................................................................ 32
7.1 Important Notes....................................................................................... 33
7.2 Connecting the IO Module to Safety Switching Devices or Safety
Modules................................................................................................... 34

4 Table of Contents WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
7.2.1 General Structure................................................................................ 34
8Use in Hazardous Environments .............................................................. 35
8.1 Marking Configuration Examples........................................................... 36
8.1.1 Marking for Europe According to ATEX and IEC-Ex ...................... 36
8.1.2 Marking for America According to NEC 500.................................... 41
8.2 Installation Regulations........................................................................... 42
8.2.1 Special Conditions for Safe Use (ATEX Certificate TÜV 07 ATEX
554086 X)........................................................................................... 43
8.2.2 Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX
106032 X)........................................................................................... 44
8.2.3 Special Conditions for Safe Use (IEC-Ex Certificate TUN 09.0001 X)45
8.2.4 Special Conditions for Safe Use (IEC-Ex Certificate IECEx TUN
12.0039 X).......................................................................................... 46
8.2.5 Special Conditions for Safe Use According to ANSI/ISA 12.12.01.. 47
List of Figures ...................................................................................................... 48
List of Tables........................................................................................................ 49
=== En de der Lis te für T extmar ke Verz eich nis_vor ne == =

WAGO-I/O-SYSTEM 750 Notes about this Documentation 5
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 7 /A lle Ser ie n (Al lg em ein e M od ul e)/Ü ber sc hri ft en f ür all e S erie n/H i nweis e zur D o ku ment ati on /Hi nw eise zu dies er D o kum ent atio n - Ü b ers chr if t 1 @ 4\mod_1237987661750_21.docx@ 29029 @ 1@ 1
1 Notes about this Documentation
Pos: 8 / All e S eri e n ( All ge mei n e M od ul e) /Hi nw eis e z ur Dok um ent ati o n/Hi n weis e/ Hi n weis : D o kum ent ati o n a uf bew ahr e n @ 4\mod_1237987339812_21.docx @ 29026@ @ 1
Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation is
included, if necessary.
Pos: 9 /A lle Ser ie n (Al lg em ein e M od ul e)/Ü ber sc hri ft en f ür all e S erie n/H i nweis e zur D o ku ment ati on /G ülti g keit sb erei c h - Ü b er sc hri f t 2@ 12\mod_1338912448776_21.docx@ 96469@ 2 @ 1
1.1 Validity of this Documentation
Pos: 10 /S er ie 75 0 ( WA GO -I/O-S YST E M) /Hi n weis e z ur Do kum e ntat i on/ Gül tig kei ts b erei c h/G ülti g k eits ber ei ch Dok um en tat io n Bus kl e mme 75 0-xxx x, S ta n dar d versi on u n d aufg eli st et e V ar ia nt e n @ 14\mod_1358944038682_21.docx@ 109354@ @ 1
This documentation is only applicable to the I/O module 750-530 (8DO 24V DC
0.5A) and the variants listed in the table below.
Pos: 11 / Serie750 (WAGO-I/O-SYST EM )/H i n weis e z ur D o kum ent at i on/ G ül tig kei ts b er eic h/ Vari a nt e nli st en/ V ar ia nt enl ist e - 7 50-xxx - Stan dard versi on und Var iante n/ 025-00 0, / 00 0-800 @ 21\mod_1415022632316_21.docx@ 167142@ @ 1
Table 1: Variants
Item Number/Variant
Designation
750-530
8DO 24V DC 0.5A
750-530/025-000
8DO 24V DC 0.5A/T
750-530/000-800
8DO 24V DC 0.5A
Pos: 12 /A ll e Ser i en ( All ge mei ne M od ule) /Hi n weis e z ur D o ku ment ati on /Hi nw eise /H in weis : G ülti g keit der Anga b en f ür a ufg el ist ete Var ia nt en @ 9\mod_1281520778141_21.docx@ 63085@ @ 1
Documentation Validity for Variants
Unless otherwise indicated, the information given in this documentation applies to
listed variants.
Pos: 13 /S er ie 75 0 ( WA GO -I/O-S YST EM )/H i nwei se z ur D o kum ent ati on/H i nw eise /Ac ht ung : H in wei s z ur D o ku ment ati on Bus kl emme n 750-xxxx @ 4\ mod_1237986979656_21.docx@ 29023@ @ 1
The I/O module 750-530 shall only be installed and operated according to the
instructions in this manual and in the manual for the used fieldbus
coupler/controller.
Consider power layout of the WAGO-I/O-SYSTEM 750!
In addition to these operating instructions, you will also need the manual for the
used fieldbus coupler/controller, which can be downloaded at www.wago.com.
There, you can obtain important information including information on electrical
isolation, system power and supply specifications.
Pos: 14.1 /All e Seri en ( Al lg emei ne M o dul e)/H i nweis e zur D o ku ment ati on /Ur heb ers c hutz aus führ li ch @ 4\mod_1235565145234_21.docx@ 27691@ 2 @ 1
1.2 Copyright
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.

6 Notes about this Documentation WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos:14.2/Dokumentationallgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx@ 21810@ @ 1
Pos: 14.3 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n f ür all e S eri en/ Hin wei s e z ur D ok um enta ti on/ S ymbol e - Ü ber sc hr ift 2 @ 13\mod_1351068042408_21.docx@ 105270@ 2@ 1
1.3 Symbols
Pos: 14.4 .1 /All e Serie n ( Al l ge mei ne Mo d ule) / Wic ht ig e Erlä ut er ung e n/ Si ch er hei ts- und sonstigeHinweise/Gefahr/Gefahr:_WarnungvorPersonenschädenallgemein_ - Erl äu ter ung @ 13 \mod_1343309450020_21.docx@ 101029@ @ 1
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 14 .4.2 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so ns ti ge H in wei s e/ Gef ahr /G ef ahr : _War nu ng vor P er so nen sc hä de n dur c h el ek tri sc he n St ro m_ - Erläuterung@ 13\mod_1343309694914_21.docx@ 101030@ @ 1
Personal Injury Caused by Electric Current!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 14 .4.3 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- undsonstigeHinw eis e/ W arn ung / W arn ung : _War n u ng vor P er so ne nsc h äd e n al l ge m ei n_ - Erläuterung@ 13\mod_1343309877041_21.docx@ 101035@ @ 1
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Pos: 14 .4.4 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- undsonstigeHinw eis e/ Vor si c ht/ Vor si ch t: _ War nu ng vor P er s one nsc hä de n al lg e mei n_ - Erläuterung@ 13\mod_1343310028762_21.docx@ 101038@ @ 1
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Pos: 14 .4.5 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- undsonstigeHinweise/Achtung/Achtung:_ War nu ng vor S ac hsc hä d en al lg e mei n_ - Erläuterung@ 13\mod_1343310134623_21.docx@ 101041@ @ 1
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 14 .4.6 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so ns ti ge H in wei s e/ Ach tu ng/ Ach tu ng : _ War nu ng vor S ac hsc hä d en d ur c h el ektrostatischeAufladung_- Erläuterung @ 13\mod_1343310227702_21.docx@ 101044@ @ 1
Damage to Property Caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 14 .4.7 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- undsonstige Hin weise/Hinweis/Hinweis:_Wichtiger Hi nweis allgemein_ - Erläuterung@ 13\mod_1343310326906_21.docx@ 101047@ @ 1
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.
Pos: 14 .4.8 /Al le Seri en (All gemei ne Mod ule)/ Wichti ge Erl äuter unge n/Sich erheit s- und so ns t ig e Hi n wei s e/I nf or mat io n/I nf or mat io n: _W eiter e I nf or ma ti on allg e mei n_ - Er l äut er ung @ 13 \mod_1343310439814_21.docx@ 101051@ @ 1

WAGO-I/O-SYSTEM 750 Notes about this Documentation 7
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
Pos: 14.5 /Do ku me nta tio n allg emei n/ Gl ie der ung s ele m ente /---Seit e nwe chs el--- @ 3\mod_1221108045078_0.docx @ 21810@ @ 1

8 Notes about this Documentation WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 14.6 /All e Seri en ( Al lg emei ne M o dul e)/H i nweis e zur D o ku ment ati on /Dar s tell ung der Za hle nsys te me - Ü b ers chr if t 2 un d I n hal t @ 3\mod_1221059454015_21.docx@ 21711 @ 2 @ 1
1.4 Number Notation
Table 2: Number Notation
Number Code
Example
Note
Decimal
100
Normal notation
Hexadecimal
0x64
C notation
Binary
'100'
'0110.0100'
In quotation marks, nibble separated with
dots (.)
Pos: 14.7 /All e Seri en ( Al lg emei ne M o dul e)/H i nweis e zur D o ku ment ati on /Sc hri ft kon venti o ne n - Ü bersc hrift 2 un dI nhalt @ 3\mod_1221059521437_21.docx@ 21714@ 2 @ 1
1.5 Font Conventions
Table 3: Font Conventions
Font Type
Indicates
italic
Names of paths and data files are marked in italic-type.
e.g.: C:\Program Files\WAGO Software
Menu
Menu items are marked in bold letters.
e.g.: Save
>
A greater-than sign between two names means the selection of a
menu item from a menu.
e.g.: File > New
Input
Designation of input or optional fields are marked in bold letters,
e.g.: Start of measurement range
“Value”
Input or selective values are marked in inverted commas.
e.g.: Enter the value “4 mA” under Start of measurement range.
[Button]
Pushbuttons in dialog boxes are marked with bold letters in square
brackets.
e.g.: [Input]
[Key]
Keys are marked with bold letters in square brackets.
e.g.: [F5]
Pos: 15 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078 _0.doc x@ 2 1810 @ @1

WAGO-I/O-SYSTEM 750 Important Notes 9
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 16 /A lle Ser ien (Al lge meine Mo dule)/ Über schrif ten für all e Serie n/Wic htig e Erläut erung en/Wi chtig e Erlä uteru ngen - Üb ersc hr if t 1 @ 4\mod_1241428899156_21.docx @ 32170@ 1@ 1
2 Important Notes
Pos: 17.1 /All e Seri en (AllgemeineDokumente)(AllgemeineModule)/WichtigeErläuterungen/Wichtige Erläuterungen- Einl eit ung @ 3\mod_1221059818031_21.docx@ 21717@ @ 1
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
Pos: 17 .2 /All e Seri en( Allg emeine M odul e)/Ü berschr ifte nf ür alle S erie n/Wich tige Er läuter u ng enR ec htli c he G r un dlag en - Üb ers c hri ft 2 @ 3\mod_1221060626343_21.docx@ 21726 @ 2 @ 1
2.1 Legal Bases
Pos:17.3/AlleSerien(AllgemeineDokumente) (AllgemeineModule)/WichtigeErläuterungen/Änderungsvorbehalt- Über schr ift 3 und In halt @ 3\mod_1221060036484_21.docx@ 21720@ 3 @ 1
2.1.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications that serve to increase the efficiency of technical
progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from
the granting of patents or from the legal protection of utility patents. Third-party
products are always mentioned without any reference to patent rights. Thus, the
existence of such rights cannot be excluded.
Pos:17.4/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Per s on al q ual if i kat io nP ers on alq u ali fi ka ti on 750- xxxx - Ü bersc hrift 3 u nd Inhal t @ 3\mod_1224061208046_21.docx@ 24063@ 3 @ 1
2.1.2 Personnel Qualifications
All sequences implemented on WAGO-I/O-SYSTEM 750 devices may only be
carried out by electrical specialists with sufficient knowledge in automation. The
specialists must be familiar with the current norms and guidelines for the devices
and automated environments.
All changes to the coupler or controller should always be carried out by qualified
personnel with sufficient skills in PLC programming.
Pos:17.5/Serie750(WAGO-I/O-SYSTEM)/WichtigeErläuterungen/BestimmungsgemäßeVerwendungBestimmungsgemäßeVerwendung750-xxxx- Ü b ers chr if t 3 un d I n hal t @ 3\mod_1224064151234_21.docx@ 24070 @3 @ 1
2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with
Underlying Provisions
Fieldbus couplers, fieldbus controllers and I/O modules found in the modular
WAGO-I/O-SYSTEM 750 receive digital and analog signals from sensors and
transmit them to actuators or higher-level control systems. Using programmable
controllers, the signals can also be (pre-) processed.
The devices have been developed for use in an environment that meets the IP20
protection class criteria. Protection against finger injury and solid impurities up to
12.5 mm diameter is assured; protection against water damage is not ensured.
Unless otherwise specified, operation of the devices in wet and dusty
environments is prohibited.
Operating the WAGO-I/O-SYSTEM 750 devices in home applications without
further measures is only permitted if they meet the emission limits (emissions of
interference) according to EN 61000-6-3. You will find the relevant information
in the section “Device Description” > “Standards and Guidelines” in the manual
for the used fieldbus coupler/controller.

10 Important Notes WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O-
SYSTEM 750 in hazardous environments. Please note that a prototype test
certificate must be obtained that confirms the correct installation of the system in
a housing or switch cabinet.
Pos: 17 .6 /All e Seri en( Allg emeine D okum ente) ( Allg emeine M odule) /Wic htige Er läut erung en/T echnis cher Z ustan d der Ger äte - Übers chri ft 3 und Inh alt @ 3\mod_1221060446109_21.docx@ 21723@ 3 @ 1
2.1.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. WAGO
Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of
changes in hardware or software as well as to non-compliant usage of devices.
Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Pos:17.7/Dokumentationall ge mei n/ G li e der ung s el em en te /---Sei t en we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 11
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 17.8 /All e Seri en ( Al lg emei ne M o dul e)/Ü ber sc hri fte n f ür all e S eri en/ Wi cht ig e Er lä uter u ngen Sic her hei ts hi nweis e - Ü ber sc hr ift 2 @ 6 \mod_1260180299987_21.docx@ 4 6724 @ 2 @ 1
2.2 Safety Advice (Precautions)
Pos: 17.9 /All e Seri en ( Al lg emei ne D ok um ent e) ( Al lg emei ne Mo dul e)/ Wic htig e Erlä ut eru nge n/ Sich erh eits hi n weis e/ Einl ei tung Si cher h eits hi nw eis e H ar d war e @ 6\mod_1260180170493_21.docx@ 46720@ @ 1
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Pos: 17.1 0. 1 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /G ef ahr /G ef ahr : Nich t an G er ät en un ter Spa nnung ar beit en! @ 6\mod_1260180365327_21.docx@ 46727@ @1
Do not work on devices while energized!
All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.
Pos: 17.1 0. 2 / S eri e 750 ( WAG O -I/O-SY STEM )/Wi cht ig e Erl äu ter ung en/Si cher hei ts- un d s o nst ig e Hi n wei se /G ef ahr / Ge fa hr: Ei nb au 0 7 50-xx xx nur i n Geh äus en, Sc hrä n ken o der el e ktris c hen Betr ie bsr ä ume n! @ 6\mod_1260180556692_21.docx@ 46731@ @ 1
Install the device only in appropriate housings, cabinets or in electrical
operation rooms!
The WAGO-I/O-SYSTEM 750 and its components are an open system. As such,
install the system and its components exclusively in appropriate housings,
cabinets or in electrical operation rooms. Allow access to such equipment and
fixtures to authorized, qualified staff only by means of specific keys or tools.
Pos: 17.1 0. 3 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /G ef ahr /G ef ahr : Unfal l v erh üt ung s v ors c hri ftenbeachten!@ 6\mod_1260180657000_21.docx@ 46735@ @ 1
Pos: 17.1 0. 4 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /G ef ahr /G ef ahr : Auf normg er ec ht e n A ns c hlu ss ac ht en! @ 6 \mod_1260180753479_21.docx@ 46739@ @1
Pos: 17.1 1. 1 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: D e fe kt e oder besc h ädig t e Ger ät e aus ta usc h en! @ 6 \mod_1260180857358_21.docx@ 46743 @ @ 1
Replace defective or damaged devices!
Replace defective or damaged device/module (e.g., in the event of deformed
contacts), since the long-term functionality of device/module involved can no
longer be ensured.
Pos: 17.1 1. 2 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: G er ä te vor kri ec he nde n und is ol i er e nd en S to ff en sch üt ze n! @ 6\mod_1260181036216_21.docx @ 46747@ @ 1
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for handling
devices/modules.
Pos: 17.1 1. 3 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: R ei ni g u ng n ur mit zul äss ig e n M at er ial ie n! @ 6\mod_1260181203293_21.docx @ 46751@ @ 1
Clean only with permitted materials!
Clean soiled contacts using oil-free compressed air or with ethyl alcohol and
leather cloths.
Pos: 17.1 1. 4 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: K ei n K ont a kts pr a y verw end e n! @ 6\mod_1260181290808_21.docx @ 46755@ @ 1

12 Important Notes WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Pos: 17.1 1. 5 / All e Seri e n ( Al lg e m ein e D o ku me nt e) ( Al lg e mei n e M o dul e) / Wic ht ig e Erlä uter u ngen /S ic h er h eits hi n wei se /Ac ht u ng/ Ac ht u ng: V er p ol ung ver mei de n! @ 6\mod_1260184045744_21.docx@ 46767@ @ 1
Do not reverse the polarity of connection lines!
Avoid reverse polarity of data and power supply lines, as this may damage the
devices involved.
Pos: 17.1 1.6 / All e S eri en (Al lg em eine D o kume nte) (All ge mei ne M odul e) / Wich ti ge Erlä uter u ngen /Si c her h eits hi nw eis e/ Ac htu ng /Ac ht u ng: El e ktr ost atis c he Entl a dung ver mei d en! @ 6\mod_1260181364729_21.docx@ 46759@ @ 1
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.
Pos: 18 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 13
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 19 /A lle Ser ien (Al lge meine Mo dule)/ Über schrif ten für all e Serie n/Ger äteb eschr eibung /Ger ätebe schrei bung - Ü ber sc hr ift 1 @ 3\mod_1233756084656_21.docx@ 27096@ 1 @ 1
3 Device Description
Pos:20.1/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/A n wen dung /D O/A n wen dung 7 50-x5xxD O @ 3\mod_1233764594468_21.docx@ 27120@ @ 1
The 750-530 (8DO 24V DC 0.5A) Digital Output Module transmits binary control
signals from the automation device to the connected actuators (e.g., solenoid
valves, contactors, transmitters, relays or other electrical loads).
Pos:20.2/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/I /O-B es c hrei bu ng /DO / I/ O-B esc hrei bu ng 750-0 5xx 8 D O 1-Leit er (DO 1 ... DO 8) @ 4\mod_1235647050031_21.docx@ 27858@ @ 1
The module has eight output channels. Eight 1-conductor actuators may be
directly connected to the module. The actuators can be connected using
connection DO 1 … DO 8.
Pos:20.3/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - u nd s ons tig e H in wei s e/Hin wei s/H i nw eis: D O Pote nti al ver vi elf älti gung s mo dul e f ür Akt or vers org ung ei ns e tze n @ 3\mod_1233765481250_21.docx@ 27140@ @ 1
Use field side connection modules!
Where required, use the appropriate field side connection modules for power
supply to the actuators.
Pos:20.4/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/I /O-B es c hr ei bu ng / Al lg em ei n/V er wei s auf Ka pit el "A nsc hl üss e" @ 8\mod_1276775378035_21.docx @ 57956 @ @ 1
The assignment of the connections is described in the “Connectors” section.
Pos:20.5/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/I /O-B es c hr ei bu ng / Al lg em ei n/V er wei s auf Ka pit el "G erät e ans chl i eß en" > " A nsc hlus s b eis piel ( e)" @ 5\mod_1246015203281_21.docx@ 36298@ @ 1
Connection examples are shown in section “Connecting Devices” > … >
“Connection Example(s)”.
Pos:20.6/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - und sonstigeHinweise/AchtungAchtung:DOI nduktionsspannungsbegrenzungElektronik @ 3\mod_1233815757507_21.docx@ 27153@ @ 1
Limit all induced voltage!
The electronic components of the I/O module can be damaged by the induced
voltage produced when inductive loads are de-activated.
An appropriate protection circuit, e.g., a recovery diode, must be installed in
parallel to the load to limit this induced voltage.
Pos:20.7/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/I /O-B es c hrei bu ng /DO / I/ O-B esc hrei bu ng 750-x5 xx D O H SS / pos i ti vsc halt end (2 4 V) @ 3\mod_1233816955742_21.docx@ 27160@ @ 1
The I/O module outputs provide high-side switching. If the signal status of an
output channel is at “high” the 24 V potential for field power will be switched to
the appropriate output connection.
Pos:20.8/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/I /O-B es c hrei bu ng /DO / I/ O-B esc hrei bu ng 750-05xx Leistungskontakt durchEinspeiseklemme@ 5\mod_1246856959993_21.docx@ 36590@ @ 1
The supply voltage for the field side is derived from an adjacent supply module by
means of power jumper contacts.
Pos:20.9/Serie750(WAGO-I/O-S YST EM) /Ger äte b esc hrei bu ng/E i nlei tu ng/L ED-A nz eig e/ LED Zu st an d Sig nal @ 3\mod_1233755258578_21.docx @ 27087@ @ 1
A green LED indicates the switched status of each channel.
Pos: 20.1 0 / S eri e 750 ( W AG O-I/ O-SYST EM ) /G erät e be sc hr ei b ung /E i nl eit ung / L ED-A nz eig e/V er weis auf Ka pi tel " A nzei g eel e me nt e" @ 5\mod_1246010525000_21.docx @ 36194@ @ 1
The meaning of the LEDs is described in the “Display Elements” section.
Pos: 20.1 1 / S eri e 750 ( W AG O-I/ O-SYST EM ) /G erät e be sc hr ei b ung /E i nl eit ung / V ers org u ng /V er s org ung 24 V, 0 V ü b er L ei st u ng s kont a kt e St an d ar d @ 3\mod_1226498974531_21.docx@ 25020@ @ 1
The I/O module 750-530 (8DO 24V DC 0.5A) receives the 24 V voltage supply
for the field level from an upstream I/O module or from the fieldbus
coupler/controller via blade-formed power jumper contacts. It then provides these
potentials to subsequent I/O modules via spring-formed power jumper contacts.
Pos: 20.1 2 / S er ie 750 ( W AG O-I/ O-SYST EM )/ Wichti g e Erl äut erung en /Sic her hei ts- un d s o nsti g e H in wei se /Ac ht ung /Ac ht ung : Maxi m aler Str o m Lei s tu ngs ko nta kt e 1 0 A @ 3\mod_1226499143500_21.docx@ 25029 @ @ 1

14 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Do not exceed maximum current via power jumper contacts!
The maximum current to flow through the power jumper contacts is 10 A.
Greater currents can damage the contacts.
When configuring your system, ensure that this current is not exceeded. If
exceeded, insert an additional supply module.
Pos: 20.1 3 / S eri e 750 ( W AG O-I/ O-SYST EM ) /G erät e be sc hr ei b ung /E i nl eit ung / V ers org u ng /G al v anis c h e T re n nu ng Fel d/ S yste m @ 3\mod_1233756478750_21.docx @ 27102@ @ 1
The field voltage and the system voltage are electrically isolated from each other.
Pos: 20.1 4 / S eri e 750 ( W AG O-I/ O-SYST EM ) /G erät e be sc hr ei b ung /E i nl eit ung / V ers org u ng /A n ord nu ng unt er Ber üc ksi c htig u ng der Lei st ung s k ont ak t e b el ie bi g @ 3\mod_1233756233468_21.docx@ 27099 @ @ 1
With consideration of the power jumper contacts, the individual modules can be
arranged in any combination when configuring the fieldbus node. An arrangement
in groups within the group of potentials is not necessary.
Pos: 20.1 5 / S eri e 750 ( W AG O-I/ O-SYST EM ) /G erät e be sc hr ei b ung /E i nl eit ung / Ei ns a tzb er eic h/ Ei n sa tzb erei c h 7 50-xx xx alle Kop pler/ C ontr oll er o h ne E i nsc hrä nk ung @ 3\mod_1232541691906_21.docx@26522 @ @ 1
The I/O module 750-530 can be used with all fieldbus couplers/controllers of the
WAGO-I/O-SYSTEM 750.
Pos: 21 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 15
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 22 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n f ür alle Ser ie n/Ger ä teb esc hrei bu ng /Ans ic ht - Ü b ers chr if t 2 @ 4\mod_1240984217343_21.docx@ 3 1958 @ 2 @ 1
3.1 View
Pos: 23 /S er ie 75 0 ( WA GO -I/O-S YS T EM )/ Ger ät eb esc hr ei bu ng /A ns ic ht /D i gi tal aus g ang s kl em m en/ A nsic ht 75 0-053 0 @ 11\mod_1322217539668_21.docx@ 83727@ @1
Figure 1: View
Pos: 24 /S er ie 75 0 ( WA GO -I/O-S YST EM )/ Ger ät ebes c hrei bu ng/A nsi c ht/A nsi c ht C ag eCl a mp®_ Leg en de mit LE D s @ 15\mod_1370867188922_21.docx @ 122225 @ @ 1
Table 4: Legend for Figure “View”
Pos.
Description
Details See Section
1
Marking possibility with Mini-
WSB
---
2
Status LEDs
“Device Description” > “Display Elements”
3
Data contacts
“Device Description” > “Connectors”
4
CAGE CLAMP®connectors
“Device Description” > “Connectors”
5
Power jumper contacts
“Device Description” > “Connectors”
6
Release tab
“Mounting” > “Inserting and Removing
Devices”
Pos: 25 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

16 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 26 / All e Seri en ( All ge mei ne M o dul e)/Ü b ersc hri fte n f ür alle Ser ie n/G erä te besc hr eib ung /A nsc hlü sse - Üb ersc hr if t 2 @ 4\mod_1240984262656_21.docx @ 31961@ 2@ 1
3.2 Connectors
Pos: 27 /S er ie 75 0 ( WA GO -I/O-S YS T EM )/ Ger ät eb esc hr ei bu ng /A ns c hl üss e/D at en k ont ak t e/Kl e m men bu s - Ü ber sc hr ift 3 @ 6\mod_1256294684083_21.docx@ 43660@ 3 @ 1
3.2.1 Data Contacts/Internal Bus
Pos:28.1/Serie750(WAGO-I/O-S YST EM ) / Ger äte b esc hr ei bu ng /A ns c hl üss e/ Da te n k ont a kt e - F el dbu s kop pler /-c on tr ol l er , A b bil d ung und Bes c hr ei bu ng @ 3\mod_1231771259187_21.docx@ 26002@ @ 1
Communication between the fieldbus coupler/controller and the I/O modules as
well as the system supply of the I/O modules is carried out via the internal bus. It
is comprised of 6 data contacts, which are available as self-cleaning gold spring
contacts.
Figure 2: Data Contacts
Pos:28.2/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - u nd s ons ti g e H in wei s e/ Ac ht ung /A c h tu ng: Bus kl em m en ni c ht auf Gol df eder k ont ak t e l eg en! @ 7 \mod_1266318463636_21.docx@ 50695@ @ 1
Do not place the I/O modules on the gold spring contacts!
Do not place the I/O modules on the gold spring contacts in order to avoid soiling
or scratching!
Pos:28.3/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - und sonstigeHinweise/Achtung/Achtung:ESD- A uf g ut e Erd ung der Umg eb u ng ac ht e n! @ 7\mod_1266318538667_21.docx@ 50708@ @ 1
Ensure that the environment is well grounded!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the devices, ensure that the environment
(persons, workplace and packing) is well grounded. Avoid touching conductive
components, e.g. data contacts.
Pos: 29 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 17
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 30 /S er ie 75 0 ( WA GO -I/O-S YS T EM )/ Ger ät eb esc hr ei bu ng /A ns c hl üss e/L eis t u ngs kont a kte/ F el d vers or g u ng - Ü b ersc hr if t 3 @ 6\mod_1256294692864_21.docx @ 43664@ 3@ 1
3.2.2 Power Jumper Contacts/Field Supply
Pos:31.1/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - u nd so nst ig e H in wei s e/ Vors ic ht/ V ors ich t: Verl etz ung sg e fa hr durc h s c har f kan tig e M ess er kont a kte! @ 6\mod_1256193279401_21.docx@ 43414@ @ 1
Risk of injury due to sharp-edged blade contacts!
The blade contacts are sharp-edged. Handle the I/O module carefully to prevent
injury.
Pos:31.2/Serie750(WAGO-I/O-S YST EM) / Ger äte b esc hr ei bung /A nsc hl üs se /L eist u ng s kont akt e 2 LK ( Mes s er/ Leis t ung s kon ta kte 2 L K ( Me sser /F ed er ) - Ei nl eit ung @ 15\mod_1371721641099_21.docx@123714@ @ 1
The I/O module 750-530 has 2 self-cleaning power jumper contacts that supply
and transmit power for the field side. The contacts on the left side of the I/O
module are designed as blade contacts and those on the right side as spring
contacts.
Pos:31.3/Serie750(WAGO-I/O-SYST EM) / Ger ät eb esc hr ei bu ng/ Ans c hl üsse /L eis t ung s kont a kte 2 LK (M ess er /Lei s tu ngs k ont ak te 2 LK ( M es ser /F ed er ) - A bbi l dung , ein fac h e Breit e - St an d ar d @ 15\mod_1367500700037_21.docx@ 118396@ @ 1
Figure 3: Power Jumper Contacts
Pos:31.4/Serie750(WAGO-I/O-S YST EM) / Ger äte b esc hr ei bung /A nsc hl üs se /L eist u ng s kont akt e 2 LK ( Mes s er/ Leis t ung s kon ta kte 2 L K ( Me sser /F ed er ) - L egend e @ 15\mod_1371721352500_21.docx@ 123710@ @ 1
Table 5: Legend for Figure “Power Jumper Contacts”
Contact
Type
Function
1
Spring contact
Potential transmission (Uv) for field supply
2
Spring contact
Potential transmission (0 V) for field supply
3
Blade contact
Potential feed-in (0 V) for field supply
4
Blade contact
Potential feed-in (Uv) for field supply
Pos:31.5/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - und sonstigeHinweise/Achtung/Achtung:MaximalerStrom Lei st ung s kon ta kt e 10 A @ 3\mod_1226499143500_21.docx @ 25029 @ @ 1
Do not exceed maximum current via power jumper contacts!
The maximum current to flow through the power jumper contacts is 10 A.
Greater currents can damage the contacts.
When configuring your system, ensure that this current is not exceeded. If
exceeded, insert an additional supply module.
Pos:31.6/Serie750(WAGO-I/O-S YST EM )/ Wi c hti g e Er lä ut er u ng en/ Si ch er h eits - u nd s ons tig e H in wei s e/Hin wei s/H i nw eis: Pote nti al ei nspei s ekl e mme f ür E rd e ei ns etz en! ( keine LK für E rd e) @ 3\mod_1226499037468_21.docx@ 25023 @ @ 1

18 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Use supply modules for ground (earth)!
The I/O module has no power jumper contacts for receiving and transmitting the
earth potential. Use a supply module when an earth potential is needed for the
subsequent I/O modules.
Pos: 32 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 19
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 33 /S er ie 75 0 ( WA GO -I/O-S Y ST EM ) / Ger ät ebes c hr ei bu ng /A ns c hl üss e/ CA GE CL AM P-An schl üs s e - Ü b er sc hri f t 3@ 6\mod_1256296337770_21.docx@ 43674 @ 3 @ 1
3.2.3 CAGE CLAMP®Connectors
Pos: 34 /S er ie 75 0 ( WA GO -I/O-S YST E M) /G er ät ebes c hrei bu ng /A nsc hl üss e/ Di gi tal ausg ang s kl em men/ An sc hl üss e 750-05xx 8 D O 1-Leit er @ 11\mod_1322218240918_21.docx@ 83734@ @ 1
Figure 4: CAGE CLAMP®Connectors
Table 6: Legend for Figure “CAGE CLAMP®Connectors”
Channel
Designation
Connector
Function
1
DO 1
1
Output DO 1: Signal voltage
2
DO 2
5
Output DO 2: Signal voltage
3
DO 3
2
Output DO 3: Signal voltage
4
DO 4
6
Output DO 4: Signal voltage
5
DO 5
3
Output DO 5: Signal voltage
6
DO 6
7
Output DO 6: Signal voltage
7
DO 7
4
Output DO 7: Signal voltage
8
DO 8
8
Output DO 8: Signal voltage
Pos: 35 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx @ 21810@ @ 1

20 Device Description WAGO-I/O-SYSTEM 750
750-530 8DO 24V DC 0.5A
Manual
Version 1.2.0
Pos: 36 /A ll e Ser i en ( All ge mei ne M od ule) /Ü b ersc hrif te n f ür alle Ser ie n/Ger ä teb esc hrei bu ng /Anz ei geel e ment e - Ü ber sc hr ift 2 @ 4 \mod_1240984390875_21.docx@ 31964 @ 2@ 1
3.3 Display Elements
Pos: 37 /S er ie 75 0 ( WA GO -I/O-S YSTEM)/Gerätebeschreibung/Anzeigeelemente/Digitalausgangsklemmen/Anzeigeelemente750-05xx 8D O @ 11\mod_1322218413230_21.docx@ 83738@ @ 1
Figure 5: Display Elements
Pos: 38 /D o ku me nt ati o n al lg e mei n/ Gl ie der ung s ele m e nte /---Seit e n we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1
Table 7: Legend for Figure “Display Elements”
Channel
Designation
LED
State
Function
1 Status DO 1 A
Off
Output DO 1: not controlled
Green
Output DO 1: controlled
2 Status DO 2 E
Off
Output DO 2: not controlled
Green
Output DO 2: controlled
3 Status DO 3 B
Off
Output DO 3: not controlled
Green
Output DO 3: controlled
4 Status DO 4 F
Off
Output DO 4: not controlled
Green
Output DO 4: controlled
5 Status DO 5 C
Off
Output DO 5: not controlled
Green
Output DO 5: controlled
6 Status DO 6 G
Off
Output DO 6: not controlled
Green
Output DO 6: controlled
7 Status DO 7 D
Off
Output DO 7: not controlled
Green
Output DO 7: controlled
8 Status DO 8 H
Off
Output DO 8: not controlled
Green
Output DO 8: controlled