WAGO I/O-SYSTEM 750 User manual

Pos:2/Dokumentationallgemein/Einband/EinbandHandbuch- Fr o nts ei t e 2015 - mit DocV ari abl e n (Sta nd ar d) @ 9\mod_1285229289866_0.docx@ 64941@ @ 1
WAGO-I/O-SYSTEM 750
Manual
750-623
Supply Module DC 24V / 5-
15V
Supply Module 24 VDC / 5 V -
15 V
Version 1.2.0
Pos: 3 / All e Seri e n ( Al lg e mei n e M odul e)/R ec htl ic hes, Allge mei n es /I mpr e ss um für Sta nd ard h an d büc h er - allg. Anga be n, Ansc hriften, T elef onnum mer n und E-Mail -Adress en @ 3\mod_1219151118203_21.docx@ 21060@ @ 1

2 WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
© 2016 by WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.
WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27
D-32423 Minden
Phone: [phone] – 0
Fax: [phone] – 1 69
E-Mail: [email protected]om
Web: http://www.wago.com
Technical Support
Phone: [phone] – 5 55
Fax: [phone] – 85 55
E-Mail: [email protected]
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: [email protected]om
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
=== Ende der List e f ür Te xt mar keE i nb a nd_ v orn e ===

WAGO-I/O-SYSTEM 750 Table of Contents 3
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 5 /D o ku ment ati on allg e mei n/ Ver zei c hni sse /I nh alts v erz ei ch nis - Ü ber schrif t oG und Ver zeich nis @ 3\mod_1219151230875_21.docx@ 21063 @ @ 1
Table of Contents
1Notes about this Documentation................................................................. 5
1.1 Validity of this Documentation................................................................. 5
1.2 Copyright................................................................................................... 5
1.3 Symbols..................................................................................................... 6
1.4 Number Notation....................................................................................... 8
1.5 Font Conventions ...................................................................................... 8
2Important Notes ........................................................................................... 9
2.1 Legal Bases ............................................................................................... 9
2.1.1 Subject to Changes ............................................................................... 9
2.1.2 Personnel Qualifications....................................................................... 9
2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with
Underlying Provisions.......................................................................... 9
2.1.4 Technical Condition of Specified Devices......................................... 10
2.2 Safety Advice (Precautions).................................................................... 11
3Device Description ..................................................................................... 13
3.1 View ........................................................................................................ 14
3.2 Connectors............................................................................................... 15
3.2.1 Data Contacts/Internal Bus................................................................. 15
3.2.2 Power Jumper Contacts/Field Supply ................................................ 16
3.2.3 CAGE CLAMP®Connectors ............................................................. 17
3.3 Display Elements .................................................................................... 18
3.4 Operating Elements................................................................................. 18
3.5 Technical Data ........................................................................................ 19
3.5.1 Device Data ........................................................................................ 19
3.5.2 Supply................................................................................................. 19
3.5.3 Connection Type ................................................................................ 19
3.5.4 Climatic Environmental Conditions................................................... 20
3.6 Approvals ................................................................................................ 21
3.7 Standards and Guidelines........................................................................ 23
4Mounting..................................................................................................... 24
4.1 Mounting Sequence................................................................................. 24
4.2 Inserting and Removing Devices ............................................................ 25
4.2.1 Inserting the I/O Module .................................................................... 25
4.2.2 Removing the I/O Module.................................................................. 26
5Connect Devices ......................................................................................... 27
5.1 Connecting a Conductor to the CAGE CLAMP®................................... 27
6Use in Hazardous Environments .............................................................. 28
6.1 Marking Configuration Examples........................................................... 28
6.1.1 Marking for Europe According to ATEX and IEC-Ex ...................... 28
6.1.2 Marking for America According to NEC 500.................................... 33
6.2 Installation Regulations........................................................................... 34
6.2.1 Special Conditions for Safe Use (ATEX Certificate TÜV 07
ATEX 554086 X) ............................................................................... 34

4 Table of Contents WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
6.2.2 Special Conditions for Safe Use (ATEX Certificate TÜV 12
ATEX 106032 X) ............................................................................... 35
6.2.3 Special Conditions for Safe Use (IEC-Ex Certificate
TUN 09.0001 X)................................................................................. 36
6.2.4 Special Conditions for Safe Use (IEC-Ex Certificate IECEx
TUN 12.0039 X)................................................................................. 37
6.2.5 Special Conditions for Safe Use According to ANSI/ISA 12.12.01.. 38
List of Figures ...................................................................................................... 39
List of Tables........................................................................................................ 40
=== En de der Lis te für Te xtmar ke Verzei ch nis_vor ne ===

WAGO-I/O-SYSTEM 750 Notes about this Documentation 5
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 7 / All e Seri e n ( Al lg e mei n e M odul e)/Ü b ers c hr ift en/ N e ue Über sc hr if t en/ Ebe n e 1Hin wei se zu dies er Do kum e nt ati on -Ü berschr i f t 1@ 4\mod_1237987661750_21.docx@ 29029 @ 1@ 1
1 Notes about this Documentation
Pos: 8 /Al le S eri en ( Allg em ein e Mod ul e)/Si cher h eits - undsonstigeHinweise/HinweisHinweis:Dokumentationaufbewahren@ 4\mod_1237987339812_21.docx@ 29026@ @ 1
Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation is
included, if necessary.
Pos: 9 / All e Seri e n ( Al lg e mei n e M odul e)/Ü b ers c hr ift en/ N e ue Über sc hr if t en/ Ebe n e 2Gül tig keitsb erei c h -Ü b er sc hri f t 2 @ 12\mod_1338912448776_21.docx@ 96469 @ 2 @ 1
1.1 Validity of this Documentation
Pos: 10 /Serie 75 0 (WAGO -I/ O-SYSTEM) /H i n weis e zur Dok ume nt ati on/Gül ti gk eits bereic hG ül ti g keit s ber ei c h D okume nt ati on Bus klemme 750-xx xx, ohn e Varian ten angab e @ 14\mod_1358944037947_21.docx@ 109346@ @ 1
This documentation is only applicable to the I/O module 750-623
(Supply Module DC 24V / 5-15V).
Pos: 11 /Serie 75 0 (WAGO -I/ O-SYSTEM) /Hi n weis e z ur Do kume nt ati on/Hi n wei se /Ac htu ng : Hi nw eis zur Do kume nt ati on Bus kle mme n 750-xxxx @ 4\mod_1237986979656_21.docx@29023@ @ 1
The I/O module 750-623 shall only be installed and operated according to the
instructions in this manual and in the manual for the used fieldbus
coupler/controller.
Consider power layout of the WAGO-I/O-SYSTEM 750!
In addition to these operating instructions, you will also need the manual for the
used fieldbus coupler/controller, which can be downloaded at www.wago.com.
There, you can obtain important information including information on electrical
isolation, system power and supply specifications.
Pos: 12.1 /All e Seri en ( All ge mei ne Mod ule) /Ü bers chr ift e n/E be ne 2/Ur heb ers chut z -Ü berschr if t 2 @ 23\mod_1435647042188_21.docx@ 184808@ 2 @ 1
1.2 Copyright
Pos: 12.2 /All e Seri en ( Al lg e mei ne Mod ule) /R ec htl ich es , Allge m ei nes /Ur h eber sc hu tz ausf ühr li ch @ 4\mod_1235565145234_21.docx@ 27691@ @ 1
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Pos:12.3/Dokumentationallgemein/Gliederungselemente/---Seiten we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

6 Notes about this Documentation WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 12.4 /All e Seri en ( All ge mei ne Mod ule) /Ü bers chr ift e n/N eue Üb ersc hri fte n/ Ebe ne 2S ymbol e - Ü berschr if t 2 @ 13\mod_1351068042408_21.docx @ 105270@ 2@ 1
1.3 Symbols
Pos: 12 .5.1 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons t ig e Hin weis e/ Ge fa hr /G ef a hr : _War nu ng vor Pers on en sc hä de n allg e mei n _ - Er läu ter ung @ 13 \mod_1343309450020_21.docx@ 101029@ @ 1
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 12 .5.2 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti ge Hin weis e/ Ge fa hr/ Gef a hr : _War nung vor Per s onen sc hä de n durch el ektr isc he n Stro m_ - Erläuterung @ 13\mod_1343309694914_21.docx@ 101030@ @ 1
Personal Injury Caused by Electric Current!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Pos: 12 .5.3 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons t ig e Hin weis e/ W ar nung / W ar nung : _W ar nung vor P ersone nsch äden all gemei n_ - Erläuterung@ 13\mod_1343309877041_21.docx@ 101035@ @ 1
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Pos: 12 .5.4 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti ge Hin weis e/ Vor si c ht/ Vor si ch t: _War n ung vor Pers on ens c häd en allg em ein _ - Erläuterung@ 13\mod_1343310028762_21.docx@ 101038@ @ 1
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Pos: 12 .5.5 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons ti ge Hin weis e/ Ac htu ng / Ach tu ng: _War nu ng vor Sac hsc h äd en allge m ein _ - Erläuterung@ 13\mod_1343310134623_21.docx@ 101041@ @ 1
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 12.5 .6 /All e Serie n ( All ge mei ne Mod ule) /Si ch erh eits- u nd sons ti g e Hi nweis e/Ac ht ung / Ach tu ng: _War nung vor Sachsc h äd en durc h elek tros tat is ch e Aufl adu ng _ -Er l äut er ung @ 13\mod_1343310227702_21.docx@ 101044@ @ 1
Damage to Property Caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Pos: 12 .5.7 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sonstige Hi nweise/Hinweis/Hinweis:_Wichtiger Hin weisallgem ein_- Erläuterung@ 13\mod_1343310326906_21.docx@ 101047@ @ 1
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.
Pos: 12 .5.8 /Al le Seri en (All gemei ne Mod ule)/ Sicher heits- u nd sons t ig e Hin weis e/I nf or matio n/I nf or ma ti on: _W ei ter e Infor mation allg e mei n_ - Erl äu ter ung @ 13\mod_1343310439814_21.docx@ 101051@ @ 1

WAGO-I/O-SYSTEM 750 Notes about this Documentation 7
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
Pos: 12.6/Dokumentationallgemein/Gliederungselemente/---Seiten we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

8 Notes about this Documentation WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 12.7 /All e Seri en ( All ge mei ne Mod ule) /Ü bers chr ift e n/E be ne 2/Dar st ellu ng der Z a hle ns yst em e - Ü bers c hri ft 2 @ 23\mod_1435647128078_21.docx @ 18481 1 @ 2@ 1
1.4 Number Notation
Pos: 12.8 /All e Seri en ( Allge mei ne Mod ule) /R ec htl ic hes , Allg em ei nes /Z ahl ens y st e me @ 3\mod_1221059454015_21.docx@ 21711@ @ 1
Table 1: Number Notation
Number Code
Example
Note
Decimal
100
Normal notation
Hexadecimal
0x64
C notation
Binary
'100'
'0110.0100'
In quotation marks, nibble separated with
dots (.)
Pos: 12.9 /All e Seri en ( All ge mei ne Mod ule) /Ü bers chr ift e n/E be ne 2/Sc hri ftk on venti on en -Ü berschr if t 2 @ 23\mod_1435647186005_21.docx @ 18 4814 @ 2 @ 1
1.5 Font Conventions
Pos: 12.1 0 /Alle Ser ie n (Allg e mei n e M odule) /R e ch tli ch es , Allg em ei nes / Sc hr ift k on ve nti on en @ 3\mod_1221059521437_21.docx@ 21714@ @ 1
Table 2: Font Conventions
Font Type
Indicates
italic
Names of paths and data files are marked in italic-type.
e.g.: C:\Program Files\WAGO Software
Menu
Menu items are marked in bold letters.
e.g.: Save
>
A greater-than sign between two names means the selection of a
menu item from a menu.
e.g.: File > New
Input
Designation of input or optional fields are marked in bold letters,
e.g.: Start of measurement range
“Value”
Input or selective values are marked in inverted commas.
e.g.: Enter the value “4 mA” under Start of measurement range.
[Button]
Pushbuttons in dialog boxes are marked with bold letters in square
brackets.
e.g.: [Input]
[Key]
Keys are marked with bold letters in square brackets.
e.g.: [F5]
Pos: 13 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078 _0.doc x@ 2 1810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 9
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 14 /Al l e Seri en ( All ge mei ne Mod ule) /Ü ber schr if te n/N eue Üb ersc hrif te n/ Ebe ne 1Wic htig e Erlä ut eru nge n - Ü b er schr i f t 1@ 4\mod_1241428899156_21.docx@ 32170 @ 1@ 1
2 Important Notes
Pos: 15.1 /All e Seri en ( Allge mei ne Mod ule) /R ec htl ic hes , Allg em ei nes Wic ht ig e Erlä uter u nge n - Ei nl ei t ung @ 3\mod_1221059818031_21.docx@ 21717@ @ 1
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
Pos: 15.2 /All e Seri en ( All ge mei ne Mod ule) /Ü bers chr ift e n/N eue Üb ersc hri fte n/ Ebe ne 2Rec htl ic he Grun dlag e n - Ü b ers chr if t 2 @ 3\mo d_1221060626343_21.docx@ 21726@ 2@ 1
2.1 Legal Bases
Pos: 15.3 /All e Seri en ( Allge mei ne Mod ule) /R ec htl ic hes , Allg em ei nes Ä nder u ngs vor be h alt -Ü berschr if t 3 und I n halt @ 3\mod_1221060036484_21.docx@ 21720@ 3 @ 1
2.1.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications that serve to increase the efficiency of technical
progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from
the granting of patents or from the legal protection of utility patents. Third-party
products are always mentioned without any reference to patent rights. Thus, the
existence of such rights cannot be excluded.
Pos:15.4/Serie750(WAGO-I/O-SY ST EM )/ Wi c hti ge Erl äut er u ng e n/ Pers onalqu al ifi kationPersonalqualifikation750-xxxx- Über schr ift 3 und I nhalt @ 3\mod_1224061208046_21.docx@ 24063@ 3@ 1
2.1.2 Personnel Qualifications
All sequences implemented on WAGO-I/O-SYSTEM 750 devices may only be
carried out by electrical specialists with sufficient knowledge in automation. The
specialists must be familiar with the current norms and guidelines for the devices
and automated environments.
All changes to the coupler or controller should always be carried out by qualified
personnel with sufficient skills in PLC programming.
Pos:15.5/Serie750(WAGO-I/O-SYSTEM)/WichtigeErläuterungen/BestimmungsgemäßeVerwendungBestimmungsgemäßeVerwendung750-xxxx- Ü berschr i f t 3 un d Inhal t @ 3 \mod_1224064151234_21.docx@ 24070 @ 3 @ 1
2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with
Underlying Provisions
Fieldbus couplers, fieldbus controllers and I/O modules found in the modular
WAGO-I/O-SYSTEM 750 receive digital and analog signals from sensors and
transmit them to actuators or higher-level control systems. Using programmable
controllers, the signals can also be (pre-) processed.
The devices have been developed for use in an environment that meets the IP20
protection class criteria. Protection against finger injury and solid impurities up to
12.5 mm diameter is assured; protection against water damage is not ensured.
Unless otherwise specified, operation of the devices in wet and dusty
environments is prohibited.
Operating the WAGO-I/O-SYSTEM 750 devices in home applications without
further measures is only permitted if they meet the emission limits (emissions of
interference) according to EN 61000-6-3. You will find the relevant information
in the section “Device Description” > “Standards and Guidelines” in the manual
for the used fieldbus coupler/controller.

10 Important Notes WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O-
SYSTEM 750 in hazardous environments. Please note that a prototype test
certificate must be obtained that confirms the correct installation of the system in
a housing or switch cabinet.
Pos: 15.6 /All e Seri en ( Allge mei ne Mod ule) /R ec htl ic hes , Allg em ei nesT ec hni s ch er Zust an d der G er ät e -Ü bersc hrift 3 und In halt @ 3\mod_1221060446109_21.docx@ 21723@ 3 @ 1
2.1.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. WAGO
Kontakttechnik GmbH & Co. KG will be exempted from any liability in case of
changes in hardware or software as well as to non-compliant usage of devices.
Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.
Pos:15.7/Dokumentationallgemein/Gliederungselemente/---Seiten we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Important Notes 11
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 15.8 /All e Seri en ( All ge mei ne Mod ule) /Ü bers chr ift e n/N eue Üb ersc hri fte n/ Ebe ne 2Sic her hei ts hi nweis e -Ü berschr if t 2 @ 6\mod_1260180299987_21.docx@ 46724 @ 2@ 1
2.2 Safety Advice (Precautions)
Pos: 15.9 /All e Seri en ( All ge mei ne Doku men te) (Al lg emei ne Mo dul e)/ Wi c htig e Erlä ut eru nge n/ Si ch erh eits hi nweis e/Ei nl ei tung Si ch erh eit s hin wei s e H ar dw are @ 6\mod_1260180170493_21.docx@ 46720@ @ 1
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Pos: 15.1 0. 1 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter ungen /Sic herhei ts hi n wei se /G ef ahr /Gefahr : Nich t an Gerät e n unter Spa nn u ng arbeit e n! @ 6\mod_1260180365327_21.docx@ 46727@ @ 1
Do not work on devices while energized!
All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.
Pos: 15.1 0. 2 /Ser ie 750 ( WAGO-I/O-SY ST EM) /Wic htig e Er l äuter ung en /Sic her hei ts- und sons tig e Hin w eis e/ G ef ahr/ Ge fa hr : Einb au 07 50-xx xx nur i n Geh äus e n, SchränkenoderelektrischenBetriebsräumen!@ 6\mod_1260180556692_21.docx@ 46731@ @ 1
Install the device only in appropriate housings, cabinets or in electrical
operation rooms!
The WAGO-I/O-SYSTEM 750 and its components are an open system. As such,
install the system and its components exclusively in appropriate housings,
cabinets or in electrical operation rooms. Allow access to such equipment and
fixtures to authorized, qualified staff only by means of specific keys or tools.
Pos: 15.1 0. 3 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter ungen /Sic herhei ts hi n wei se /G ef ahr /Gefahr : Unfal l v erh üt ung s v ors c hri ft en bea ch te n! @ 6\mod_1260180657000_21.docx@ 46735@ @ 1
Pos: 15.1 0. 4 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter ungen /Sic herhei ts hi n wei se /G ef ahr /Gefahr : Auf normg erecht e n Ansc hlu ss ac ht en! @ 6\mod_1260180753479_21.docx@ 46739@ @ 1
Pos: 15.1 1. 1 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter u ng en /Sic h erh ei ts hin wei se /Ac ht u ng/A c htu ng : D ef ek te oder besc h ädig t e Gerät e austa usc h en! @ 6\mod_1260180857358_21.docx@ 46743@ @ 1
Replace defective or damaged devices!
Replace defective or damaged device/module (e.g., in the event of deformed
contacts), since the long-term functionality of device/module involved can no
longer be ensured.
Pos: 15.1 1. 2 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter ungen /Sic herhei ts hi n wei se /Ac ht u ng /Ac ht u ng : Gerä te vor kriec henden und isol ier enden Sto ff en schüt z en! @ 6\mod_1260181036216_21.docx@ 46747@ @ 1
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for handling
devices/modules.
Pos: 15.1 1. 3 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter ungen /Sic herhei ts hi n wei se /Ac ht u ng /Ac ht u ng : Reini g ung nur mit zul äss ig e n M ateri ali e n! @ 6\mod_1260181203293_21.docx@ 46751@ @ 1
Clean only with permitted materials!
Clean soiled contacts using oil-free compressed air or with ethyl alcohol and
leather cloths.
Pos: 15.1 1. 4 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter ungen /Sic herhei ts hi n wei se /Ac ht u ng /Ac ht u ng : Kei n Kontaktsprayverwenden!@ 6\mod_1260181290808_21.docx@ 46755@ @ 1

12 Important Notes WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Pos: 15.1 1. 5 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter ungen /Sic herhei ts hi n wei se /Ac ht u ng /Ac ht u ng : Verp ol ung ver meiden! @ 6\mod_1260184045744_21.docx@ 46767@ @ 1
Do not reverse the polarity of connection lines!
Avoid reverse polarity of data and power supply lines, as this may damage the
devices involved.
Pos: 15.1 1. 6 /Alle Ser ie n (Allg e mei n e D okume nt e) (Allg e m ein e Modul e)/Wic ht ig e Erlä uter ungen /Sic herhei ts hi n wei se /Ac ht u ng /Ac ht u ng : El e ktr ost atis ch e Entla du ng verm eid en! @ 6\mod_1260181364729_21.docx@ 46759@ @ 1
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.
Pos: 16 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 13
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 17 /Al l e Seri en ( All ge mei ne Mod ule) /Ü ber schr if te n/N eue Üb ersc hrif te n/ Ebe ne 1Ger ät ebes chr ei bung - Ü b ers chr if t 1 @ 3\mod_1233756084656_21.docx@ 27096@ 1 @ 1
3 Device Description
Pos:18.1/Serie750(WAGO-I/O-SY ST EM ) / Ger ät e bes c hr ei bu ng /Ei nleitu ng /A n w en d ung / SY /A n we ndu ng 75 0-0 623 @ 11\mod_1317905453996_21.docx@80779 @ @ 1
The supply module 750-623 uses the DC 24 V input voltage to generate an
adjustable output voltage of DC 5 V, DC 8 V, DC 10 V, DC 12 V or DC 15 V.
Pos:18.2/Serie750(WAGO-I/O-SY ST EM) /Ger ät eb esc hrei bu ng /Ei nlei tu ng/I/O-Besc hr ei bu ng / SY/ I/O-Beschreibung 750-0623@ 11\mod_1317905581177_21.docx@ 80783@ @ 1
The input voltage is supplied via the CAGE CLAMP connections 24 V, 0 V and
ground from an external power source.
The output voltage is derived from the CAGE CLAMP connections + and -.
Furthermore, the power jumper contacts provide the output voltage to adjacent I/O
modules.
Pos:18.3/Serie750(WAGO-I/O-SY ST EM) /Ger ät eb esc hrei bu ng /Ei nlei tu ng /I/ O-Bes c hr ei bu ng / Al lg em ei n/ V er wei s auf Ka pitel "A ns c hl üss e" @ 8\mod_ 1276775378035_21.docx@ 57956@ @ 1
The assignment of the connections is described in the “Connectors” section.
Pos:18.4/Dokumentationallgemein/Gliederungselemente/------Leerzeil e------ @ 3\mod_1224662755687_0.docx@ 24460@ @ 1
Pos:18.5/Serie750( WAGO-I/O-SYST EM )/ Ger äte b esc hrei bu ng/E i nlei tu ng/L ED-A nz eige/LE D Ver sor g ung Ei ng a ng / Ausg ang @ 4\mod_1241687100406_21.docx@32677@ @ 1
Two green status LED indicate the status of the input voltage and the output
voltage.
Pos:18.6/Serie750(WAGO-I/O-SYSTEM )/ Ger äte bes c hrei bu ng/Ei nl ei tu ng/L ED-A nz eige/Ver weis auf Kapit el "Anz eigeel e men te" @ 5\mod_1246010525000_21.docx@ 36194@ @ 1
The meaning of the LEDs is described in the “Display Elements” section.
Pos:18.7/Serie750(WAGO-I/O-SY ST EM ) / Ger ät e bes c hr ei bu ng/Ei nl ei tu ng/V ers or gung / Eins p eisu ng 5 V ... 15 V, 0 V , E r de @ 11\mod_1317905843710_21.docx@ 80787@ @ 1
The I/O module provides the 5V … 15V potential, 0V potential and earth
potential to subsequent I/O modules via the power contacts used as spring
contacts.
Pos:18.8/Serie750(WAGO-I/O-SY ST EM )/ Wi c hti ge Erl äut er u ng e n/ Sic her h eit s- und sonstigeHinweise/Achtung/Achtung:MaximalerStrom Einspeisung750-06230,5A / 1,0A @ 11\mod_1317906232519_21.docx@ 80791@ @ 1
Do not exceed maximum current via power contacts!
The maximum current that is permitted to flow through the power jumper contacts
is 0.5 A (1 A at an output voltage of 5 V). When configuring the system, this
current must not be exceeded.
Pos:18.9/Serie750(WAGO-I/O-SY ST EM )/ Wi c hti ge Erl äut er u ng e n/ Sic her h eit s- u nd sonsti g e Hinw eis e/ Ach tu ng /Ac ht ung : Überl as tsc h utz 750-06 23 0,5 A /Achtung:Überlastschutz750-06230,5 A/ 1,0A @ 17\mod_1383659220483_21.docx@ 136708@ @ 1
Restricted overload protection!
The 750-623 supply module is short-circuit-protected. The overload protection
provides only limited protection. An overload of 150 % (0.75 A or 1.5 A) must
not be present for more than 5 seconds.
If this cannot be guaranteed, the 24 V power supply must be protected to prevent
damage to the 750-623 supply module.
Pos: 18.1 0 /Ser ie 750 ( WAGO-I/ O-SYSTEM) /G erät e be sc hr ei b ung /Ei nleitung / V er sor g ung /G al vanisc he Tre nnu ng Ei ns peis u ng nic ht vor ha nde n! @ 11\mod_1317908305666_21.docx@ 80795@ @ 1
Input and output voltages are not electrically isolated from each other.
Pos: 18.1 1 /Ser ie 750 ( WAGO-I/ O-SYSTEM) /G erät e bes chr eib u ng/Ei nl eit ung/ V ers org ung /A nor dnu ng der Pote nti alg rup p en u n d Bus kl e mme n i n de n Pote nti alg rup p en b eli ebi g @ 9\mod_1289992989792_21.docx@ 66482@ @ 1
Both the potential groups and the individual modules within these groups can be
arranged in any combination when designing the field bus node.
Pos: 18.1 2 /Ser ie 750 ( WAGO-I/ O-SYSTEM )/ G erät e be sc hr ei bu ng /Ei nleitung / Ei n sa tzb er eic h/ E in sa tz ber ei c h 750-xxx x alle Koppl er/C o ntr oll er ohne Ei nsc hrä nk ung @ 3\mod_1232541691906_21.docx@26522 @ @ 1
The I/O module 750-623 can be used with all fieldbus couplers/controllers of the
WAGO-I/O-SYSTEM 750.
Pos: 19 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

14 Device Description WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 20 /Al l e Seri en (AllgemeineModule)/Überschriften/NeueÜberschriften/Ebene2Ansicht- Über sc hr ift 2 @ 4\mod_1240984217343_21.docx@31958@ 2 @ 1
3.1 View
Pos: 21 /Serie 75 0 (WAGO -I/ O-SYSTEM) / Ger ätebesc hreibu ng /A nsi c ht /S ys te m kl e m men/ Ansich t 750-0623 @ 11\mod_1317904638688_21.docx@ 80763@ @ 1
Figure 1: View
Table 3: Legend for Figure “View”
Pos.
Description
Details See Section
1
Marking possibility with Mini-
WSB
---
2 Status LEDs
“Device Description” >
“Display Elements”
3
Data contacts
“Device Description” > “Connectors”
4
CAGE CLAMP®connectors
“Device Description” > “Connectors”
5
Power jumper contacts
“Device Description” > “Connectors”
6 Release tab
“Mounting” > “Inserting and Removing
Devices”
7 DIP switch – output voltage
“Device Description” >
“Operating Elements”
Pos: 22 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 15
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 23 /Al l e Seri en ( All ge mei ne Mod ule) /Ü ber schr if te n/N eue Üb ersc hrif te n/ Ebe ne 2Ans chl üss e -Ü b er sc hri f t 2 @ 4\mod_1240984262656_21.docx@ 31961@ 2 @ 1
3.2 Connectors
Pos: 24 /Serie 75 0 (WAGO -I/ O-SYSTEM) / Ger ät eb es c hrei bung/A nsc hlüss e/D at en k ont ak t e/Kl e m me nbu s - Über sc hr ift 3 @ 6\mod_1256294684083_21.docx@ 43660@ 3 @ 1
3.2.1 Data Contacts/Internal Bus
Pos:25.1/Serie750(WAGO-I/O-SY ST EM ) / Ger ät e bes c hr ei bu ng /A ns c hl üsse/Da te n k ont a kt e -F el dbu s kop pl er/-c on t rol l er , Abbi ld ung u nd Besc hr ei bung @ 3\mod_1231771259187_21.docx@ 26002@ @ 1
Communication between the fieldbus coupler/controller and the I/O modules as
well as the system supply of the I/O modules is carried out via the internal bus. It
is comprised of 6 data contacts, which are available as self-cleaning gold spring
contacts.
Figure 2: Data Contacts
Pos:25.2/Serie750(WAGO-I/O-SYST EM)/Wic hti g e Erläut er u ng e n/ Sic her h eit s- u nd sonsti g eHi n wei s e/ Ach tu ng /A ch tu ng : Buskl e m men nic ht auf Gol df eder konta kt e legen! @ 7\mod_1266318463636_21.docx@ 50695@ @ 1
Do not place the I/O modules on the gold spring contacts!
Do not place the I/O modules on the gold spring contacts in order to avoid soiling
or scratching!
Pos:25.3/Serie750(WAGO-I/O-SY ST EM )/ Wi c hti ge Erl äut er u ng e n/ Sic her h eit s- u nd sonstigeHinweise/Achtung/Achtung: ESD- Auf gut e Erd ung der Umg eb u ng acht e n! @ 7\mod_1266318538667_21.docx@ 50708@ @ 1
Ensure that the environment is well grounded!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the devices, ensure that the environment
(persons, workplace and packing) is well grounded. Avoid touching conductive
components, e.g. data contacts.
Pos: 26 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

16 Device Description WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 27 /Serie 75 0 (WAGO -I/ O-SYSTEM) / Ger ät eb es c hrei bung/A nsc hlüss e/L eis t u ngs kontakt e/F el dversor g u ng -Ü b ersc hr if t 3 @ 6\mod_1256294692864_21.docx@ 43664@ 3 @ 1
3.2.2 Power Jumper Contacts/Field Supply
Pos: 28 /S erie 750 (WAGO-I/O-SYST EM ) / Ger ät eb esc hreibu ng /A nsc hl üsse/L eis t ung s ko nt a kte 3 LK (F ed er ) - Abbil dung - Bus kl e mm e @ 7\mod_1274962153518_21.docx@ 57134 @ @ 1
Figure 3: Power Jumper Contacts
Pos: 29 /Serie 75 0 (WAGO -I/ O-SYSTEM) / Ger ät eb es c hrei bung/A nsc hlüss e/L eis t u ngs kontakt e 3 LK ( Feder ) -L egend e @ 15\mod_1371723810145_21.docx@ 123738@ @ 1
Table 4: Legend for Figure “Power Jumper Contacts”
Contact
Type
Function
1 Spring contact
Potential transmission (U
V
)
for field supply
2 Spring contact
Potential transmission (0 V)
for field supply
3 Spring contact
Potential transmission (ground)
for field supply
Pos: 30 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

WAGO-I/O-SYSTEM 750 Device Description 17
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 31 /S erie 750 (WAGO-I/O-SYST EM ) / Ger ätebesc hr ei bung/A nsc hlüss e/C A GE CLAM P-An sc hl üss e - Ü berschr i f t 3@ 6\mod_1256296337770_21.docx@ 43674@ 3 @ 1
3.2.3 CAGE CLAMP®Connectors
Pos: 32 /Serie 75 0 (WAGO -I/ O-SYSTEM) / Ger ätebesc hreibu ng /A nsc hlüss e/S y st e m kle mm en /A ns c hlü s se 75 0-0 623 @ 11\mod_1317909490692_21.docx@ 80813 @ @ 1
Figure 4: CAGE CLAMP®Connectors
Table 5: Legend for Figure “CAGE CLAMP®Connectors”
Designation
Connector
Function
24 V
1
Input: 24 VDC
0 V
5
Input: 0 VDC
5 V … 15 V
2
Output: 5 VDC, 8 VDC, 10 VDC, 12 VDC or
15 VDC
*)
6
0 V
3
Output: 0 VDC
7
Common
(ground)
4
In-/output: Common (ground)
8
*) The output voltage is selected by a DIP switch
Pos: 33 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

18 Device Description WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 34 /Al l e Seri en ( All ge mei ne Mod ule) /Ü ber schr if te n/N eue Üb ersc hrif te n/ Ebe ne 2Anz eig eel em ent e - Übers c hri ft 2 @ 4\mod_1240984390875_21.docx@ 31964@ 2 @ 1
3.3 Display Elements
Pos: 35 /Serie 75 0 (WAGO -I/ O-SYSTEM) / Ger ätebesc hreibu ng /A nz ei g e ele m en te /S ys te m kl e mm en /A nz ei g eel e me nt e 750-06xx(Agn,Cgn) @ 17\mod_1383721395781_21.docx@ 136728@ @1
Figure 5: Display Elements
Table 6: Legend for Figure “Display Elements”
LED
State
Function
A
Green
24 V supply voltage is available
Off
No 24 V supply voltage is available
C
Green
5 V … 15 V output voltage is available
Off
No 5 V … 15 V output voltage available
Pos: 36 /Al l e Seri en ( All ge mei ne Mod ule) /Ü ber schr if te n/N eue Üb ersc hrif te n/ Ebe ne 2Bedi en ele me nt e - Ü ber sc hri ft 2 @ 4\mod_1239191655456_21.docx@ 30439@ 2 @ 1
3.4 Operating Elements
Pos: 37 /Serie 75 0 (WAGO -I/ O-SYSTEM) / Ger ätebesc hreibu ng /B e die nel ement e/ B us kle m me n/ B edi e n ele m en te 750-0623@ 11\mod_1317909392305_21.docx@ 80809@ @ 1
Figure 6: DIP switches for output voltage
Table 7: Assignment of DIP switch settings to output voltage
DIP switch
Output voltage
1
2
3
4
X
X
X
On
5 VDC
X
X
On
Off
8 VDC
X
On
Off
Off
10 VDC
On
Off
Off
Off
12 VDC
Off
Off
Off
Off
15 VDC
X: Any switch setting
Pos: 38 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078_0.docx@ 21810@ @ 1

WAGO-I/O-SYSTEM 750 Device Description 19
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 39 /Al l e Seri en ( All ge mei ne Mod ule) /Ü ber schr if te n/N eue Üb ersc hrif te n/ Ebe ne 2Tec hnis ch e D at en - Über sc hr ift 2 @ 3\mod_1232967587687_21.docx@ 26924@ 2 @ 1
3.5 Technical Data
Pos: 40 /Serie 75 0 (WAGO -I/ O-SYSTEM)/ Ger ätebesc hr ei bu ng/ T ech nisc h e Date n/S ys te mkl e mme n/T ec hnis c he Dat en 750-0 623 @ 11 \mod_1317905084501_21.docx@ 80775 @ 33@ 1
3.5.1 Device Data
Table 8: Technical Data – Device
Width
12 mm
Height (from upper edge of 35 DIN rail)
64 mm
Depth
100 mm
Weight
Approx. 54 g
3.5.2 Supply
Table 9: Technical Data – Supply
Voltage supply
Via CAGE CLAMP®connectors
Input voltage
24 VDC (−15 % ... +20 %)
Input current max.
< 20 mA + load
Voltage via power jumper contacts
5 VDC , 8 VDC, 10 VDC, 12 VDC,
15 VDC
Current via power jumper contacts
0.5 A, short circuit protected
(1 A at 5 V output voltage)
Pos: 41 /Serie 75 0 (WAGO -I/ O-SYSTEM) / Wic ht ig e Erlä ut er ung e n/ Si ch er hei ts- u nd sons tig eHi n wei s e/Ac ht ung /A ch tu ng: Über l asts c hutz 7 50-062 3 0,5 A/ 1,0 A @ 17 \mod_1383659220483_21.docx@ 136708@ @ 1
Restricted overload protection!
The 750-623 supply module is short-circuit-protected. The overload protection
provides only limited protection. An overload of 150 % (0.75 A or 1.5 A) must
not be present for more than 5 seconds.
If this cannot be guaranteed, the 24 V power supply must be protected to prevent
damage to the 750-623 supply module.
Pos: 43.1 /All e Seri en ( All ge mei ne Mod ule) /Ü bers chr ift e n/N eue Üb ersc hri fte n/ Ebe ne 3An schl uss tec h ni k - Ü bers c hri ft 3 @ 17\mod_1380123271324_21.docx @ 132788@ 3@ 1
3.5.3 Connection Type
Pos:43.2/Serie750( WAGO-I/O-SYST EM ) /G er äte bes c hrei bu ng /T ech nis c he Date n/T ec h nisc he Dat e n V erdr ahtung s eben e CC -0,08 bis2,5mm2@ 17\mod_1380121238809_21.docx@ 132780@ @ 1
Table 10: Technical Data – Field Wiring
Wire connection
CAGE CLAMP®
Cross section
0.08 mm² … 2.5 mm², AWG 28 … 14
Stripped lengths
8 mm … 9 mm / 0.33 in
Pos:43.3/Serie750(WAGO-I/O-SY ST EM) / Ger äte b esc hrei bung/T ec hni sc he Date n/ A nsc hl uss tec h ni k/T ec hnisc h e Dat en Leist ung s ko nta kt e ( nur Fe der) @ 17\mod_1380123979476_21.docx@ 132801@ @ 1
Table 11: Technical Data – Power Jumper Contacts
Power jumper contacts
Spring contact, self-cleaning
Voltage drop at I max.
< 1 V/64 modules
Pos:43.4/Serie750(WAGO-I/O-SY ST EM) / Ger äte b esc hrei bung/T ec hni sc he Date n/ A nsc hl uss tec h ni k/T ec hnisc h e Dat en Date nk onta kt e @ 1 7\mod_1380123495844_21.docx@ 132794@ @ 1
Table 12: Technical Data – Data Contacts
Data contacts
Slide contact, hard gold plated, self-
cleaning
Pos: 44 /D okum entat ion all ge mei n/ G li e der ung s el em e nte /---Sei t en we chs el --- @ 3\mod_1221108045078_0.docx@ 21810 @ @ 1

20 Device Description WAGO-I/O-SYSTEM 750
750-623 Supply Module DC 24V / 5-15V
Manual
Version 1.2.0
Pos: 45 /Serie 75 0 (WAGO -I/ O-SYSTEM) /G er äteb esc hr ei bung /T ech nisc h e Da te n/ Kli mat isc he U mg eb ung sb edi ng ung enT ec hni sch e D at en Klim at. Umg ebu ng sbe d. ohn e er w. Temp.0.. .5 5°C / -25. . .+8 5°C @ 5\mod_1247657968368_21.docx@ 37603@ 3 @ 1
3.5.4 Climatic Environmental Conditions
Table 13: Technical Data – Climatic Environmental Conditions
Operating temperature range
0 °C … 55 °C
Storage temperature range
−25 °C … +85 °C
Relative humidity without condensation
Max. 95 %
Resistance to harmful substances
Acc. to IEC 60068-2-42 and
IEC 60068-2-43
Maximum pollutant concentration at
relative humidity < 75 %
SO
2
≤25 ppm
H2S
≤
10 ppm
Special conditions
Ensure that additional measures for
components are taken, which are used in
an environment involving:
– dust, caustic vapors or gases
– ionizing radiation
Pos: 46 /Doku me nt ati o n allg emei n/Glie der ungsel em e nte /---Sei t e nwe chs el --- @ 3\mod_1221108045078_0.docx@ 21810@ @ 1