WAGO 750 Series User manual

Manual
WAGO-I/O-SYSTEM 750
753-647
DALI Multi
-Master
Version 1.4.3

2 WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
© 2020 WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.
WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27
D-32423 Minden
Phone: [phone] – 0
Fax: [phone] – 1 69
E-Mail: [email protected]
Web: www.wago.com
Technical Support
Phone: [phone] – 4 45 55
Fax: [phone] – 84 45 55
E-Mail: [email protected]
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: [email protected]
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.

WAGO-I/O-SYSTEM 750 Table of Contents 3
753-647 DALI Multi-Master
Manual
Version 1.4.3
Table of Contents
1Notes about this Documentation .............................................................6
1.1 Validity of this Documentation.................................................................6
1.2 Revision History......................................................................................6
1.3 Copyright................................................................................................7
1.4 Symbols .................................................................................................8
1.5 Number Notation ..................................................................................10
1.6 Font Conventions .................................................................................10
2Important Notes ......................................................................................11
2.1 Legal Bases..........................................................................................11
2.1.1 Subject to Changes..........................................................................11
2.1.2 Personnel Qualifications ..................................................................11
2.1.3 Use of the 750 Series in Compliance with Underlying Provisions.....11
2.1.4 Technical Condition of Specified Devices.........................................12
2.1.4.1 Disposal ......................................................................................12
2.1.4.1.1 Electrical and Electronic Equipment........................................12
2.1.4.1.2 Packaging ...............................................................................13
2.2 Safety Advice (Precautions) .................................................................14
2.3 Requirements .......................................................................................17
2.4 Compatibility List ..................................................................................18
3Device Description..................................................................................19
3.1 Device-Specific Safety Information .......................................................19
3.2 Abbreviations and Terms......................................................................20
3.3 General Description..............................................................................21
3.4 View .....................................................................................................24
3.5 Connectors ...........................................................................................25
3.5.1 Data Contacts/Local Bus..................................................................25
3.5.2 Power Jumper Contacts/Field Supply ..............................................26
3.5.3 CAGE CLAMP®Connectors.............................................................26
3.6 Display Elements..................................................................................28
3.7 Operating Elements..............................................................................28
3.8 Schematic Diagram ..............................................................................29
3.9 Technical Data .....................................................................................30
3.9.1 Device..............................................................................................30
3.9.2 Supply..............................................................................................30
3.9.3 Communication................................................................................30
3.9.4 Connection Type..............................................................................31
3.9.5 Climatic Environmental Conditions...................................................31
3.10 Approvals .............................................................................................32
3.11 Standards and Guidelines ....................................................................33
4Process Image.........................................................................................34
4.1 Watchdog .............................................................................................34
4.2 Dedicated IEC Application ....................................................................35
4.3 Full Mode .............................................................................................35
4.4 Easy Mode ...........................................................................................36
4.4.1 Latching Relay Function...................................................................36

4 Table of Contents WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
4.4.2 Dim in 1- and 2-Button Mode ...........................................................36
4.4.3 Process Image Overview in the “Easy Mode”...................................37
4.4.4 Activating/De-activating 64 DALI Actuators, Dimming ......................38
4.4.5 Activating/De-activating 16 Groups, Dimming ..................................40
4.4.6 Activating/De-activating 16 Scenes ..................................................40
5Mounting..................................................................................................41
5.1 Mounting Sequence..............................................................................41
5.2 Inserting and Removing Devices ..........................................................42
5.2.1 Inserting the I/O Module...................................................................42
5.2.2 Removing the I/O Module ................................................................43
5.3 I/O Modules with Pluggable Wiring Level (Series 753) .........................43
5.3.1 Coding .............................................................................................44
5.3.2 Plug Removal ..................................................................................46
6Connect Devices .....................................................................................47
6.1 Connecting a Conductor to the CAGE CLAMP®...................................47
6.2 Power Supply for Marine Applications ..................................................48
6.2.1 Power Supply Concept (Marine Applications) with DC/DC
Converter – Class A.........................................................................48
6.2.2 Power Supply Concept (Marine Applications) with AC/DC Power
Supply Unit – Class A ......................................................................50
6.2.3 Power Supply Concept (Marine Applications) – Class B ..................51
6.3 Installation Notes..................................................................................52
6.3.1 Module Assembly.............................................................................52
6.3.2 Module Supply .................................................................................52
6.3.2.1 Power Supply Configuration for 753-620 .....................................54
6.3.2.2 Power Supply Configuration for 787-1007 ...................................55
6.3.3 DALI Bus Line..................................................................................55
6.3.4 DALI Bus Topology ..........................................................................56
6.3.5 DALI-1 Compatibility ........................................................................57
7Commissioning .......................................................................................58
7.1 Preparation...........................................................................................58
7.2 Accessing the DALI Multi-Master Module .............................................59
7.3 Module Configuration Notes .................................................................59
7.4 “Construction Site Function” for Initial Startup.......................................59
7.5 Notes on Data Management.................................................................60
7.6 Notes on RESET Commands ...............................................................60
7.7 Configuration of the DALI Network Using the WAGO DALI
Configurator..........................................................................................60
8Diagnostics..............................................................................................62
8.1 LED “A” Status Diagnosis .....................................................................62
8.2 LED “B” Status Diagnosis .....................................................................63
8.3 LED “C” Status Diagnosis.....................................................................63
8.4 LED “D” Status Diagnosis.....................................................................64
8.5 LED “E” Status Diagnosis .....................................................................64
8.6 LED “F” Status Diagnosis .....................................................................65
8.7 LED “G” Status Diagnosis.....................................................................65
8.8 LED “H” Status Diagnosis.....................................................................66

WAGO-I/O-SYSTEM 750 Table of Contents 5
753-647 DALI Multi-Master
Manual
Version 1.4.3
8.9 LEDs A-H Flashing Together................................................................66
9Appendix .................................................................................................67
9.1 Device Types........................................................................................67
Glossary............................................................................................................70
List of Figures ..................................................................................................74
List of Tables....................................................................................................75

6 Notes about this Documentation WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
1 Notes about this Documentation
Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation
is included, if necessary.
1.1 Validity of this Documentation
This documentation is only applicable to the I/O module 753-647
(DALI Multi-Master).
The I/O module 753-647 shall only be installed and operated according to the
instructions in this manual and in the manual for the used fieldbus coupler or
controller.
Consider power layout of the WAGO I/O SYSTEM 750!
In addition to these operating instructions, you will also need the manual for the
used fieldbus coupler or controller, which can be downloaded at www.wago.com.
There, you can obtain important information including information on electrical
isolation, system power and supply specifications.
1.2 Revision History
Table 1: Revision History
Document
version
Device version
Change
Hardware
Firmware
1.0.0
01
01
First edition
1.1.0
01
01
Editorial revision: adjustments for
WAGO DALI Configurator 2
1.2.0
01
01
Editorial revision
1.3.0
02
04
HW update, FW update, adjustments
for WAGO DALI Configurator 3
1.4.0
03
20
“DALI-2 ready”; adjustments for WAGO
DALI Configurator 3.1
1.4.2
03
20
Editorial supplement:
Notes on DALI-1 compatibility
1.4.3
03
20
Editorial supplement in section
“Construction Site Function”

WAGO-I/O-SYSTEM 750 Notes about this Documentation 7
753-647 DALI Multi-Master
Manual
Version 1.4.3
1.3 Copyright
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.

8 Notes about this Documentation WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
1.4 Symbols
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Personal Injury Caused by Electric Current!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Damage to Property Caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.

WAGO-I/O-SYSTEM 750 Notes about this Documentation 9
753-647 DALI Multi-Master
Manual
Version 1.4.3
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).

10 Notes about this Documentation WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
1.5 Number Notation
Table 2: Number Notation
Number Code
Example
Note
Decimal
100
Normal notation
Hexadecimal
0x64
C notation
Binary
'100'
'0110.0100'
In quotation marks, nibble separated
with dots (.)
1.6 Font Conventions
Table 3: Font Conventions
Font Type
Indicates
italic
Names of paths and data files are marked in italic-type.
e.g.: C:\Program Files\WAGO Software
Menu
Menu items are marked in bold letters.
e.g.: Save
>
A greater-than sign between two names means the selection of a
menu item from a menu.
e.g.: File > New
Input
Designation of input or optional fields are marked in bold letters,
e.g.: Start of measurement range
“Value”
Input or selective values are marked in inverted commas.
e.g.: Enter the value “4 mA” under
Start of measurement range
.
[Button]
Pushbuttons in dialog boxes are marked with bold letters in square
brackets.
e.g.: [Input]
[Key]
Keys are marked with bold letters in square brackets.
e.g.: [F5]

WAGO-I/O-SYSTEM 750 Important Notes 11
753-647 DALI Multi-Master
Manual
Version 1.4.3
2 Important Notes
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
2.1 Legal Bases
2.1.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all
rights arising from the granting of patents or from the legal protection of utility
patents. Third-party products are always mentioned without any reference to
patent rights. Thus, the existence of such rights cannot be excluded.
2.1.2 Personnel Qualifications
All sequences implemented on WAGO I/O SYSTEM 750 devices may only be
carried out by electrical specialists with sufficient knowledge in automation. The
specialists must be familiar with the current norms and guidelines for the devices
and automated environments.
All changes to the coupler or controller should always be carried out by qualified
personnel with sufficient skills in PLC programming.
2.1.3 Use of the 750 Series in Compliance with Underlying
Provisions
Fieldbus couplers, controllers and I/O modules found in the modular WAGO I/O
SYSTEM 750 receive digital and analog signals from sensors and transmit them
to actuators or higher-level control systems. Using controllers, the signals can
also be (pre-) processed.
The devices have been developed for use in an environment that meets the IP20
protection class criteria. Protection against finger injury and solid impurities up to
12.5 mm diameter is assured; protection against water damage is not ensured.
Unless otherwise specified, operation of the devices in wet and dusty
environments is prohibited.
Operating the WAGO I/O SYSTEM 750 devices in home applications without
further measures is only permitted if they meet the emission limits (emissions of
interference) according to EN 61000-6-3. You will find the relevant information in
the section “Device Description” > “Standards and Guidelines” in the manual for
the used fieldbus coupler or controller.
Appropriate housing (per 2014/34/EU) is required when operating the WAGO I/O
SYSTEM 750 in hazardous environments. Please note that a prototype test

12 Important Notes WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
certificate must be obtained that confirms the correct installation of the system in
a housing or switch cabinet.
The implementation of safety functions such as EMERGENCY STOP or safety
door monitoring must only be performed by the F I/O modules within the modular
WAGO I/O SYSTEM 750. Only these safe F I/O modules ensure functional safety
in accordance with the latest international standards. WAGO's interference-free
output modules can be controlled by the safety function.
2.1.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These
modules contain no parts that can be serviced or repaired by the user. The
following actions will result in the exclusion of liability on the part of WAGO
Kontakttechnik GmbH & Co. KG:
• Repairs,
• Changes to the hardware or software that are not described in the
operating instructions,
• Improper use of the components.
Further details are given in the contractual agreements. Please send your
request for modified and new hardware or software configurations directly to
WAGO Kontakttechnik GmbH & Co. KG.
2.1.4.1 Disposal
2.1.4.1.1 Electrical and Electronic Equipment
Electrical and electronic equipment may not be disposed of
with household waste. This also applies to products without
this symbol.
Electrical and electronic equipment contain materials and substances that can be
harmful to the environment and health. Electrical and electronic equipment must
be disposed of properly after use.
WEEE 2012/19/EU applies throughout Europe. Directives and laws may vary
nationally.

WAGO-I/O-SYSTEM 750 Important Notes 13
753-647 DALI Multi-Master
Manual
Version 1.4.3
Environmentally friendly disposal benefits health and protects
the environment from harmful substances in electrical and
electronic equipment.
• Observe national and local regulations for the disposal of electrical and
electronic equipment.
• Clear any data stored on the electrical and electronic equipment.
• Remove any added battery or memory card in the electrical and
electronic equipment.
• Have the electrical and electronic equipment sent to your local
collection point.
Improper disposal of electrical and electronic equipment can be harmful to the
environment and human health.
2.1.4.1.2 Packaging
Packaging contains materials that can be reused.
PPWD 94/62/EU and 2004/12/EU packaging guidelines apply throughout
Europe. Directives and laws may vary nationally.
Environmentally friendly disposal of the packaging protects the environment and
allows sustainable and efficient use of resources.
• Observe national and local regulations for the disposal of packaging.
• Dispose of packaging of all types that allows a high level of recovery,
reuse and recycling.
Improper disposal of packaging can be harmful to the environment and wastes
valuable resources.

14 Important Notes WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
2.2 Safety Advice (Precautions)
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Do not work on devices while energized!
All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.
Dangerous voltages – follow assembly sequence!
If there is a fault, dangerous voltages may be present on the DALI bus. The DALI
Multi-Master Module must not be placed directly to the left of an I/O module that
works with SELV and has power jumper contacts (e.g., Supply Module 750-624).
Otherwise, safe disconnect cannot be ensured. If necessary, put a spacer
module (Item No. 750-616) between the DALI Multi-Master Module and such an
I/O module to ensure safe disconnection.
Install the device only in appropriate housings, cabinets or in electrical
operation rooms!
The WAGO-I/O-SYSTEM 750 and its components are an open system. As such,
install the system and its components exclusively in appropriate housings,
cabinets or in electrical operation rooms. Allow access to such equipment and
fixtures to authorized, qualified staff only by means of specific keys or tools.
Dangerous voltages – restrict access
Since the DALI bus is only isolated from power supply with basic insulation, it
cannot be ruled out that dangerous voltages are present on the DALI bus in the
event of a fault. In accordance with EN 61010-2-201, this communication
interface must be restricted as inaccessible.
Ensure a standard connection!
To minimize any hazardous situations resulting in personal injury or to avoid
failures in your system, the data and power supply lines shall be installed
according to standards, with careful attention given to ensuring the correct
terminal assignment. Always adhere to the EMC directives applicable to your
application.

WAGO-I/O-SYSTEM 750 Important Notes 15
753-647 DALI Multi-Master
Manual
Version 1.4.3
Ensure proper contact with the DIN-rail!
Proper electrical contact between the DIN-rail and device is necessary to
maintain the EMC characteristics and function of the device.
Replace defective or damaged devices!
Replace defective or damaged device/module (e.g., in the event of deformed
contacts).
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for
handling devices/modules.
Clean only with permitted materials!
Clean housing and soiled contacts with propanol.
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Do not reverse the polarity of connection lines!
Avoid reverse polarity of data and power supply lines, as this may damage the
devices involved.

16 Important Notes WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.

WAGO-I/O-SYSTEM 750 Important Notes 17
753-647 DALI Multi-Master
Manual
Version 1.4.3
2.3 Requirements
Table 4: Required Hardware of the WAGO I/O SYSTEM
Component
Reference source (order number)
Fieldbus controller/PLC
WAGO I/O SYSTEM 750, e. g.
ETHERNET PLC (750-881) or
PFC200 Controller
WAGO (750-881)
WAGO (750-8212)
DALI Multi-Master Module
WAGO (753-647)
End Module
WAGO (750-600)
Current supply for the indirect supply of
the DALI Bus participants via the DALI
Multi-Master Module (753-647), e. g.:
DALI Multi-Master DC/DC Converter or
Current supply
WAGO (753-620)
WAGO (787-1007)

18 Important Notes WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
2.4 Compatibility List
The following controllers are compatible with the DALI_647_02.lib and/or
DALI_647_04.lib libraries:
Table 5: Controller Compatibility List
Item No.
Name
From FW
*_02.lib
*_04.lib
*_PFC_04.lib
e!COCKPIT
750-819
PFC LON
09
x
750-829
PFC BACnet MS/TP
07
x
x
750-830
PFC BACnet/IP
05
x
750-831
PFC BACnet/IP
07
x
x
750-833
PFC PROFIBUS
17
x
750-837
PFC CANopen
17
x
750-838
PFC CANopen
17
x
750-841
PFC ETHERNET
21
x
750-842
PFC ETHERNET
19
x
750-849
PFC KNX IP
05
x
750-852
PFC ETHERNET
09
x
x
750-871
PFC ETHERNET
09
x
750-872
PFC ETHERNET
05
x
750-873
PFC ETHERNET
05
x
750-880
PFC ETHERNET
09
x
x
750-881
PFC ETHERNET
09
x
x
750-882
PFC ETHERNET
09
x
x
750-884
PFC ETHERNET
09
x
x
750-885
PFC ETHERNET
09
x
x
750-889
PFC KNX IP
07
x
x
750-810x
PFC100 ETHERNET
08
x
750-820x
PFC200 ETHERNET
08
x
x
750-821x
PFC200 ETHERNET
11
x
x
758-874
I/O-IPC
09
x
x
758-875
I/O-IPC
09
x
x
758-876
I/O-IPC
09
x
x

WAGO-I/O-SYSTEM 750 Device Description 19
753-647 DALI Multi-Master
Manual
Version 1.4.3
3 Device Description
3.1 Device-Specific Safety Information
Dangerous voltages – follow assembly sequence!
If there is a fault, dangerous voltages may be present on the DALI bus. The DALI
Multi-Master Module must not be placed directly to the left of an I/O module that
works with SELV and has power jumper contacts (e.g., Supply Module 750-624).
Otherwise, safe disconnect cannot be ensured. If necessary, put a spacer
module (Item No. 750-616) between the DALI Multi-Master Module and such an
I/O module to ensure safe disconnection.
Required accessories: Power supply unit for indirect power supply via the
DALI Multi-Master Module (753-647), Item No.: 753-620 or 787-1007!
Please note that a suitable power supply is required for the network slaves via
the DALI Multi-Master Module, such as the power supply unit for the DALI Multi-
Master Module (753-647), Item No.: 787-1007, or the DALI Multi-Master DC/DC
Converter (753-620).
These power supplies do not provide direct power to the DALI bus, but only
indirect power supply via the DALI Multi-Master Module. They ensure electrical
isolation for this between the DALI bus and the I/O module required for the
installation of 230 V electrical loads.
Destruction of DALI subscribers due to misuse of the WAGO power supply
(787-1007)!
Please note that the power supply by WAGO (Item No.: 787-1007) may only be
connected to the DALI Multi-Master Module (753-647). The power supply for the
DALI bus is provided indirectly via the DALI Multi-Master Module. A direction
connect to the DALI bus can result in the destruction of the attached DALI slaves.
Therefore, never connect the WAGO Power Supply (787-1007) to a DALI
network directly without a DALI Multi-Master Module (753-647) connected
between the power supply and the network.
No reverse voltage protection!
The module is not protected against incorrect connection of the connecting leads.

20 Device Description WAGO-I/O-SYSTEM 750
753-647 DALI Multi-Master
Manual
Version 1.4.3
Perform configuration using the WAGO DALI Configurator!
You must use the WAGO DALI Configurator for configuration of the DALI Multi-
Master Module (753-647) and the DALI Line.
You can download the WAGO DALI Configurator as a stand-alone tool from the
WAGO Internet site at:
www.wago.com
More information about the WAGO DALI Configurator!
A detailed description of the WAGO DALI Configurator is given in the manual for
the configurator.
You can download this manual free of charge from the WAGO Internet site at:
www.wago.com
Limit the PLC cycle time to maximum 60 ms
The DALI function blocks in the PLC program must be run at least every 60 ms
for communication with the DALI Configurator.
3.2 Abbreviations and Terms
Table 6: Abbreviations and Terms Used in this Manual
Abbreviation/
Term
Explanation
Control Device
IEC term for the DALI (Multi)-Master (also, active sensors)
Control Gear
IEC term for passive electronic ballast (actuators)
DALI
“Digital Addressable Lighting Interface”
(protocol for lighting control)
ECG
Electronic control gear (ballast unit)
PI
Process image of I/O module
PAA
I/O module output process data
PAE
I/O module input process data
More definitions of terms given in the glossary.
Further, detailed explanations and definitions of technical terms used in this
manual are given in alphabetical order in the section “Glossary.”