
www.wahsega.com Page 5
Consumer line input level (-10dBV)
Consumer line input level (+10dBV)
Contact closure to ground (12 V RTN).
Connect a Panic Button using Input 1 and 12 V RTN
(GND).
Isolated dry contact closure. Normally Open.
Isolated dry contact closure. Common.
Isolated dry contact closure. Normally Closed.
UNUSED
Not used at this time.
LAN / POE
To use Power-over-Ethernet (PoE), route a Cat 5 or Cat 6 Ethernet cable
through a PoE injector to the LAN/POE port.
Once the unit is successfully powered, the LINK/ACTV indicator
LED will begin to blink.