Wahsega Carina PBX Lite Assembly instructions

Carina PBX Lite
Installer’s Guide
Getting Started
This step-by-step guide will help you install your
Wahsega Carina PBX Lite.

Carina PBX Lite Installation Guide Page 2 1.11.2021
What’s in the Box
(1) Carina PBX Lite
(1) 2-Pin male connector
(1) 6-Pin male connector
(1) 8-Pin male connector
(1) Ferrite cable clamp

Carina PBX Lite Installation Guide Page 3 1.11.2021
What You Will Need
PoE power
Power-over-Ethernet (PoE 802.3af) switch
Network cable (Cat 5e or Cat 6)

Carina PBX Lite Installation Guide Page 4 1.11.2021
Wiring
Power
Option A: To use Power-over-Ethernet (POE 802.3af), route a Cat 5e or
Cat 6 Ethernet cable from a PoE switch or injector to the LAN port.
Option B: Alternately, use the included 2-pin male connector to
connect +9-16VDC and Ground wires for power. Use standard
(unpowered) Ethernet for data.
NOTE: Use either POE or 9-16V for power. DO NOT USE BOTH.
Status
The status LED will increase in brightness as the Carina PBX Lite is
powering up and will remain steadily lit when the unit is successfully
powered.
Status
LED
Ethernet or POE
If using Power Option A = POE 802.3af
If using Power Option B = Ethernet
Do Not
Use
Power
Option B
Reset

Carina PBX Lite Installation Guide Page 5 1.11.2021
Dimensions
Front
Rear

Carina PBX Lite Installation Guide Page 6 1.11.2021
Side

Carina PBX Lite Installation Guide Page 7 1.11.2021
Standards Compliant
This product is designed and manufactured in the USA.
ROHS compliant
Temperature rating -40C to +60C.

Carina PBX Lite Installation Guide Page 8 1.11.2021
Carina PBX Lite
WL-PBX-LITE-CAR
Installation Guide